New Arrivals
Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 12" - Left/Right Hand - 7K
The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- ABS
- Self Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 16 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
Dexter Trailer Hub and Drum Assembly - 7K Axle - 12" - 8 on 6-1/2 - 5/8" Studs - Oil Bath
This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and cone nuts included.
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 17 Inch Wheel
- Dexter
Dexter Bearing Kit for 1-1/16" BTR Spindle
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.25 Inch I.D.
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- Dexter
Replacement Grease Caps for Dexter/Tie Down Engineering Vortex Trailer Hubs
In Stock
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.32 Inch O.D.
- 4200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- Dexter
Dexter Boat Trailer Axle - 89" Long - Galvanized
Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.
- Trailer Axles
- Trailer Suspension Parts
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Drop - 4 Inch
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - Oil Bath - Qty 1
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- ABS
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 8 on 6-1/2 Inch
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 17 Inch Wheel
- Dexter
EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
In Stock
Grease caps with 1.99" OD seal out dirt while letting you add grease through your EZ Lube spindle. Rubber plug keeps grease in and water out. Designed for Dexter 7" and 10" x 1-1/4" hubs. Includes 2 caps.
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 3500 lbs Axle
- 3000 lbs Axle
- 2000 lbs Axle
- 2500 lbs Axle
- 2200 lbs Axle
- Dexter
Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2
Replace the grease seal on your Dexter 12" x 2" hub manufactured after 1998. Inner diameter measures 2.25". Outer diameter measures 3.376". Includes 2 seals.
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- Dexter
Dexter Vault Hybrid Lubrication Kit for 7,000-lb Trailer Buddy Axles
If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 7000 lbs Axle
- Dexter
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 400 lbs WD TW
- No Cross Tube
- etrailer
etrailer Invisible Base Plate Kit - Removable Arms
In Stock
Stay sleek when not towing! These hidden base plates offer a clean, factory look and quick twist-on arm connection. Easy, bolt-on install with all hardware included.
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- etrailer
etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum
In Stock
A high-quality soft, roll-up tonneau cover at this price? You bet. It may not have all the fancy extras that some of the other national brands have, but if you're looking for the best value for your money our etrailer cover can't be beat.
- Tonneau Cover
- Roll-Up - Soft
- Not Rack Compatible
- Opens at Tailgate
- Tailgate Lock
- Aluminum and Vinyl
- Vinyl Grain
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
etrailer RV Enclosed Cargo Carrier Kit with Cover - 60"
In Stock
You're packed for the weekend, the RV is full, but the cooler and lawn chairs won't squeeze in. This kit solves that with a lockable carrier, an enclosure cage, and a weather-resistant cover to keep your cargo dry, clean, and out of sight.
- RV Cargo Carrier
- Cargo Carrier
- Bumper Mount
- 440 lbs
- Fixed
- 24 Inch Deep
- Steel
- etrailer
Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 5,000 lbs
In Stock
Weld-on jack has a retracted height of 24-5/8" and an extended height of 39-7/8". The square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes sidewind handle.
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Standard Grade
- 4001 - 5000 lbs
- Manual Jack
- Weld-On
- With Rectangle Foot
- etrailer
etrailer 2 Swivel Jacks w/ Bolt-On Mounting Plates - Sidewind - 10" Travel - 3,000 lbs
In Stock
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- Car Hauler
- Side-Mount Jacks
- Swivel Jacks
- Standard Grade
- 2001 - 3000 lbs
- Manual Jack
- Bolt-On
- With Rectangle Foot
- etrailer
etrailer Invisible Base Plate Kit - Removable Arms
In Stock
Stay sleek when not towing! These hidden base plates offer a clean, factory look and quick twist-on arm connection. Easy, bolt-on install with all hardware included.
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- etrailer
etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum
In Stock
A high-quality soft, roll-up tonneau cover at this price? You bet. It may not have all the fancy extras that some of the other national brands have, but if you're looking for the best value for your money our etrailer cover can't be beat.
- Tonneau Cover
- Roll-Up - Soft
- Not Rack Compatible
- Opens at Tailgate
- Tailgate Lock
- Aluminum and Vinyl
- Vinyl Grain
- etrailer
etrailer Scissor Stabilizer Jack - 24" Lift - 7,500 lbs - Qty 1
In Stock
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.
- Camper Jacks
- Trailer Jack
- RV Motorhome
- Travel Trailer
- 5th Wheel Camper
- Teardrop Camper
- Pop Up Camper
- Scissor Jacks
- Steel
- 7001 - 8000 lbs
- Manual Jack
- Bolt-On
- 1 Jack
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - Preorder
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 6000 lbs WD GTW
- 900 lbs WD TW
- Concealed Cross Tube
- etrailer
etrailer Invisible Base Plate Kit - Removable Arms
In Stock
Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
In Stock
Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 7500 lbs GTW
- 8000 lbs WD GTW
- 800 lbs WD TW
- Concealed Cross Tube
- etrailer
etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
In Stock
We've been there - the rattles, the clanks, the frustrating swaps - so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Steel
- Fits 2 Inch Hitch
- Towing Anti-Rattle
- Accessory Anti-Rattle
- etrailer
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
In Stock
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 89 Inch Hub Face
- No Drop or Lift
- etrailer