New Arrivals

This water heater's efficent 10,000 Btu burner recovers up to 12 gallons of water per hour. Unit is small and lightweight for an easy fit in your RV. Plus, it does not use an anode rod, so there's one less thing to maintain.

• RV Water Heater
• Standard Water Heater
• Gas
• 10000 Btu or Less
• 12 Volts
• 6 Gallon Tank
• 12-3/4L x 12-3/4W x 19-7/8D Inch
• White Door
• Dometic

Life on the road has its own rhythm, and this fridge moves with it. It keeps your food cold, your setup simple, and your plans open for wherever the road takes you, even off the grid.

• RV Refrigerators
• Full Fridge
• Top Freezer
• Stainless Steel Finish
• 120V
• Propane
• 120V/Propane
• 6 - 8 Cubic Feet
• 24-7/8W x 26D x 60-13/16T Inch
• Silver
• Dometic

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 400 lbs TW
• 4000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 770 lbs TW
• 7700 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 12000 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 3/8 - 1/2 Inch Chain Links
• Red
• Durabilt

You work with the biggest equipment and the toughest loads. This chain binder delivers the strength and control you need to get the job done right. It's built for demanding hauls and rough conditions, so you can count on it every day.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 18100 lbs
• 15 Inch Handle
• 1/2 - 5/8 Inch Chain Links
• Red
• Durabilt

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 5200 lbs Axle
• 4200 lbs Axle
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 15123 and 25580
• Race 25520 and 15245
• 6000 lbs Axle
• Dexter

Power up and down with confidence using this rugged Dexter KTI double action 12V pump. 3 Quart reservoir delivers reliable hydraulic flow for dump trailers, lifts, and more. Includes PU/PD remote and manual override for control anywhere.

• Dump Trailer Parts
• Hydraulic System
• Hydraulic Pumps
• 3 Qt
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

This 3-quart hydraulic pump makes operating dump trailers and other systems easy, letting you lift, lower, or let things down by gravity. It comes with a handy handheld pendant with a removal cord and start solenoid.

• Dump Trailer Parts
• Hydraulic System
• Hydraulic Pumps
• 3 Qt
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• For 5200 lbs Axles
• For 6000 lbs Axles
• 8 on 6-1/2 Inch
• 17 Inch Wheel
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Round trailer axle beam measures 91" from hub face to hub face and 74-1/2" from spring center to spring center. E-Z Lube spindles simplify bearing maintenance. Axle includes welded spring seats, brake flanges, and spindles.

• Trailer Axles
• Leaf Spring Suspension
• Standard Grade
• No Hubs
• 4400 lbs
• Spindles Only
• 91 Inch Hub Face
• No Drop or Lift
• Dexter

Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• 5th Wheel Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Standard Grade
• Dexter

Tilt deck kit makes loading and unloading vehicles easier without ramps. Includes cylinder assembly, hydraulic fittings, supports, clamps, hinges, and safety signs.

• Dump Trailer Parts
• Lifting System
• Tilt Deck Kits
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• Oil Bath
• ABS
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• 16 Inch Wheel
• 17 Inch Wheel
• Dexter

Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.

• Trailer Brakes
• Disc Brakes
• Marine Grade
• 5 on 4-1/2 Inch
• Rotor
• 3500 lbs Axle
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 02675 and 25580
• Race 25520 and 02420
• 8000 lbs Axle
• 7200 lbs Axle
• Dexter

Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• 7000 lbs Axle
• Dexter