New Arrivals

This heater fits directly into the frost plug port and features a copper heating element with a forged brass adapter.

• Vehicle Heaters
• Engine Block Heater
• Frost Plug Style
• 120 Volts
• 400 Watts
• CSA Approved
• Zerostart

Heater with cordset delivers 1000 watts at 120 volts to support compatible equipment. Includes integrated power cord and plug.

• Vehicle Heaters
• Engine Block Heater
• Cartridge Style
• 120 Volts
• 1000 Watts
• Zerostart

This electric battery heater warms your battery for reliable cold-weather starts, helping maintain cranking power and improving recharge time. Slim, acid-resistant silicone design installs easily, even in sub-zero temperatures.

• Oil Pan Heater
• Heating Pad
• 120 Volts
• 60 Watts
• 8-1/2L x 5-1/2W Inch
• CSA Approved
• Zerostart

The Zerostart 600 watt engine heater is a universal block heater designed to warm engine coolant, improving cold start performance in low temperatures. It provides reliable heating power to aid engine start-up in winter conditions.

• Vehicle Heaters
• Engine Block Heater
• Cartridge Style
• 120 Volts
• 600 Watts
• Zerostart

This engine heater is a 1500 watt, 120 volt, immersion heater designed for Mercedes engines. It helps warm engine coolant for easier starts and reduced wear in cold temperatures.

• Vehicle Heaters
• Engine Block Heater
• Cartridge Style
• 120 Volts
• 1500 Watts
• Zerostart

Engine block heater helps pre-warm coolant for easier cold starts. Heater also features a 1-5/8inch bore design compatible with a wide range of engines.

• Vehicle Heaters
• Engine Block Heater
• Cartridge Style
• 120 Volts
• 1000 Watts
• Zerostart

Engine block heater helps pre-warm coolant for easier cold starts. Fits Chevy and GMC trucks with 6.6L Duramax diesel. 1000 watt, 120 volt unit includes brass adapter for installation.

• Vehicle Heaters
• Engine Block Heater
• Cartridge Style
• 120 Volts
• 1000 Watts
• Zerostart

This circulation heater is perfect for light-duty use, with a convenient cylindrical design and universal strap for easy installation. It also features a safety thermostat to prevent overheating and a detachable power cord.

• Vehicle Heaters
• Circulating Heater
• External Tank
• 120 Volts
• 1500 Watts
• CSA Approved
• Zerostart

Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• Andersen

If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Adapters
• Pop-In Ball
• Andersen

Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Andersen

Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Andersen

This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.

• Wheel Chocks
• Accessories and Parts
• Trailer Tires and Wheels
• Tire Change Jack
• Andersen

Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.

• Accessories and Parts
• Weight Distribution Hitch
• Chains
• Andersen

You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.

• Accessories and Parts
• 5th Wheel Hitch
• Gooseneck Coupler Adapter
• Andersen

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 1 metal sleeve and 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, the amber color adds contrast in fog or wet conditions, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Amber
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

When you lift the front of your rig, the sway bar can end up out of position. This front sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Front Anti-Sway Bar
• Old Man Emu

Reduce friction and prevent squeaking with SRBC60A interleaf liners for Old Man Emu leaf springs. These HDPE liners snap into place and feature a long retention clip, ideal for bottom leaves, or long leaves with contact on one side only.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Liners
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu