New Arrivals

The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• 32000 lbs
• Bolt-On
• Shock-Absorbing
• 5 Mounting Positions
• Gen-Y Hitch

Upgrade your B&W Patriot hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.

• Accessories and Parts
• 5th Wheel Hitch
• Combo Hitch
• Gen-Y Hitch

This shock-absorbing shank gives you 12 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2300 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 11 Inch Drop
• Gen-Y Hitch

Replaces the locking twist clip on your Gen-Y gooseneck clevis pin. Works with all Gen-Y gooseneck clevis pins. Includes 5 clips.

• Accessories and Parts
• Gooseneck Hitch
• Pins and Clips
• Locking Clips
• Gen-Y Hitch

This shock-absorbing shank gives you 6 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1000 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 6 Inch Drop
• Gen-Y Hitch

Replaces one of the ramps for your Gen-Y Hitch aluminum loading ramp set. Ramp is 7' long and 14" wide. Supports 3,000 lbs. Includes serrated aluminum panels for extra grip.

• Accessories and Parts
• Car Ramps
• ATV Ramps
• Trailer Ramps
• Ramps
• Gen-Y Hitch

Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.

• Accessories and Parts
• Hitch Step
• Trailer Hitch
• Skid Plate
• Gen-Y Hitch

Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into the 2-1/2" stacked receivers providing attachment points for a system head. Secures with included pin and clip.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1500 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Replaces the Y shank on your Gen-Y adjustable stabilizer bar kit. Fits in the back of your 2" stacked receiver and provides attachment points for stabilizer bars.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

Replaces 1 of the lower brackets needed to install your Firestone Ride-Rite air helper springs (W217602445 or W217602407).

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Lower Bracket
• Firestone

This kit includes 1 replacement air spring for Firestone Coil-Rite kit 4100. Spring fits inside an existing front coil spring to help level your vehicle, improve braking and handling, and reduce tire wear.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Coil-Rite
• Firestone

Replaces a straight schrader valve fitting for Firestone Coil-Rite air helper springs.

• Accessories and Parts
• Vehicle Suspension
• Valves
• Firestone

Replaces one of the two M10 X 1.5 X 50 MM flat head cap screws for your Firestone Ride-Rite air helper spring kit. Attaches your upper bracket to the factory jounce bumper's threaded bolt hole in your vehicle's frame. Includes 1 screw.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Screws
• Cap Screw
• Firestone

Replaces a 5/16" flat washer for Firestone Ride-Rite, Red Label, or Coil-Rite air helper springs.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Washers
• Firestone

Replaces the upper right bracket needed to install your Firestone Ride-Rite air helper springs (2603). Includes 1 upper right bracket.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Upper Bracket
• Firestone

Missing the upper bracket on your Ride-Rite setup? This replacement fits the passenger's side of your Firestone F2558 kit and gets your air spring secured back to the frameso you can get back to towing without the sag or the squish.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Upper Bracket
• Firestone

Swap out a worn or damaged bag with this durable replacement air spring for your Firestone Ride-Rite Red Label air helper springs (F2700). Restores ride support and load leveling with heavy-duty rubber and double-convoluted construction.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Double Convoluted
• Firestone

Replaces an air spring in your Firestone Granning 5553 kit.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Firestone

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks

Cyclings supposed to be about the ride, not fighting with knobs or hunting for tools. These toolless adjustment dials let you switch wheel sizes with a quick twist, so your bike fits snug and you're rolling in seconds.

• Accessories and Parts
• Hitch Bike Racks
• Wheel Holds
• Knobs
• Crosstrack
• Hollywood Racks

Replaces 1 knob for your Hollywood Racks Traveler bike rack (HR8500). Knob has 3" long x 5/16" diameter bolt with 18 threads per inch.

• Accessories and Parts
• Hitch Bike Racks
• Knobs
• Hollywood Racks