Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.
This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.
This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.
Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.
Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.
Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.
This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.
Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.
The sun is blazing, but your battery isn't. This solar panel lets you harness the sun to recharge your CS Free, keeping your battery and devices powered so you're never stranded off-grid. Just unfold the panel, position it, and power up.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.
You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.
You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.
Your CS Free is built for portability, but when you're home, you need a safe spot for it. This mount keeps your charger secure in your garage. Mount it permanently or hang it temporarily - either way, your charger is ready when you need it.