New Arrivals

Your strap's in place, the tree's solid, and now all that force runs through this shackle. You thread the pin, give it one last check, and step back knowing this is what's going to get you out of the mess that you got yourself into.

• Tow Shackles
• Shackle Only
• Tie On
• Steel
• 36000 lbs WLL
• 1-3/8 Inch Pin Diameter
• Black
• BulletProof Hitches

Designed for motorcycle and dirt bike tires that are 2" to 6" wide, this chock clips right into the E-track in your trailer. Position the chock at 45 degrees to the left or right, or at 90 degrees - whatever works best for your setup.

• Wheel Chocks
• E Track
• E Track Wheel Chocks
• Brophy

Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Zinc Coated Steel
• Brophy

Protect your truck bed with a custom-fit liner that cushions cargo and shields against dents and spills. Its 3/4" thick, stain-resistant material is knee-friendly and easy to clean. Installs with hook-and-loop fasteners - no drilling required.

• Truck Bed Mats
• Custom-Fit Mat
• Trucks w Spray-In Liners
• Bare Bed Trucks
• 3/4 Inch Thick
• Full Bed Protection
• BedRug

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

If you've ever guessed at your trailer's tongue weight and hoped for the best, you're not alone. This compact scale gives you a quick, one-handed way to check weight at the coupler. It even comes with a SnapPad for added grip.

• Tongue Weight Scale
• Analog Scale
• 2000 lbs
• Big Truck Big RV

You're walking around your rig and spot the trim line ending bare. No cover, just an open edge collecting dirt and water. This molded end cap slides over the extrusion and sits flush for a clean, finished look.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders

You've parked for the night and just want to relax. This ceiling vent sets the tone, letting you adjust both direction and airflow, so your space feels just right. One small change, and your RV feels more like home.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• White
• B and B Molders

Mount it outside your RV or in your wet bay and hit the ground running - this panel keeps all your water and cable hookups in one spot with capped ports to keep things clean. Less fiddling, more chilling.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• Plastic
• Black
• B and B Molders

You're checking the top rear seam of the slide-out and notice the trim corners exposed. The caps missing and now water or road spray can sneak in. This replacement screws into place and finishes off the joint while blending with the trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

You've dealt with the smell, the mess, and the hose dragging across everything in the storage bay. You cut a hole for the hatch, drop the hose in, and close it up. Now it's contained, easy to reach, and not touching anything it shouldn't.

• RV Access Doors
• Sewer Hose Hatch
• Rectangle
• 8W x 6-1/2T Inch
• White
• B and B Molders

You're walking around your rig and spot the lower corner of the slide-out. The cap is cracked, so the edge is exposed and there is nothing sealing it from water or road debris. This angled bottom cap fixes it before it becomes a problem.

• RV Slide Out Parts
• Caps and Covers
• Angled Bottom
• Bolt-On
• Black
• B and B Molders

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

Towing a trailer means you can't afford to guess what's behind you. This custom fit system puts live views of your bed and trailer on a digital rear view mirror, so you always know what's back there before you change lanes or park.

• Backup Camera
• Backup Camera Systems
• Third Brake Light Camera System
• Wireless
• 155 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

A dead battery is the last thing you need on a busy day. This wireless charging pad keeps your phone powered up whenever you hit the road. No more fumbling with cables while you're driving. Just drop your phone on the pad and keep moving.

• Portable Chargers
• In-Vehicle Charger
• Wireless Charging
• USB Cable Not Included
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• White
• B and B Molders

You're standing in the hot kitchen, cookin' up a storm, wondering why the air always hits the couch but never the stove. This vent fixes that. It redirects airflow where it matters most. A simple upgrade that puts control in your hands.

• RV Vents and Fans
• Vent
• Ceiling Vent
• No Fan
• Plastic
• Black
• B and B Molders

You're filling the fresh tank before a long weekend and your original water hatch is cracked, loose, and barely hanging on. You know it's time for a new one. This kit has everything you need to swap it out and get ready for the next trip.

• RV Water Inlets
• Gravity Fill Inlet
• Flush Mount
• Plastic
• Gray
• B and B Molders

You're checking under the slide-out and notice the left-side drip pan is missing. Now water has a direct path to the underbelly and trim. This replacement pan fits snug at the floor corner and helps steer runoff away from the RV.

• RV Slide Out Parts
• Caps and Covers
• Drip Pan
• Bolt-On
• Black
• B and B Molders