New Arrivals

Replaces the 20-pin, 3-wire power harness for your Jensen RV stereo (VR209TP).

• Accessories and Parts
• RV Stereos
• Power Harness
• Jensen

This handy 1/2" manifold plug works with your JR Products LP Gas Manifold to prevent leakage and keeps contaminates out for clean use.

• Accessories and Parts
• Propane Fittings
• Plugs
• Manifold
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• White
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• Black
• JR Products

Replacement plug fits on any female quick-disconnect port to keep out debris and moisture. Keeping that port clean is critical to create safe, secure connections and make sure the port works great for a long time.

• Accessories and Parts
• Propane Fittings
• Plugs
• JR Products

This screwdriver-like tool is required to disconnect hoses from your JR Products LP Gas Manifold.

• Accessories and Parts
• Propane Fittings
• Tools
• Manifold
• JR Products

Add extra sturdiness to a fold-out tray, slide-out camp kitchen, or portable table. Once installed, this table leg will fold flat against whatever you mount it to. Leg height adjusts in 1" increments from 22-1/2" up to 35-1/2"

• Accessories and Parts
• Camping Table
• Table Legs
• JR Products

Designed for your vehicle with a factory tow package, this wiring harness plugs into the quick-connect harness located under your dashboard and into your Hopkins brake controller for easy installation.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• Hopkins

Replaces a brass bleed port on your Hydrastar caliper. Designed for use with Hydrastar disc brake systems.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Bleed Valve
• Hydrastar

Replaces the ceramic brake pads for your Hydrastar disc brakes with 225 calipers. Works with 303-E36C and 303-E36CSS calipers. Includes 4 brake pads.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Brake Pads
• Hydrastar

Replaces the lock cover set for your Inno roof rack feet. Fits Inno feet for square crossbars (INSUT).

• Accessories and Parts
• Roof Rack
• Lock Parts
• Tower Parts
• Covers
• Feet
• Inno

Replaces the extension plates for your Chock-N-Lock wheel stabilizers (71001-BX). Expands your wheel chock to stabilize your trailer when parked. Includes one pair of plates.

• Accessories and Parts
• Camper Jacks
• Wheel Chocks
• Extension Plate
• InfiniteRule

Locking pin secures your M1 Store Redeemer shackle from theft. Includes 2 keys.

• Accessories and Parts
• Tow Shackles
• Hook and Shackle Lock
• InfiniteRule

Heavy-duty, stainless steel locks provide superior security when locking your B&W hitch step to your B&W Tow and Stow 2" or 2-1/2" ball mount. Third-party-tested pin has a 42,000-lb shear strength.

• Accessories and Parts
• Hitch Step
• Pins and Clips
• InfiniteRule

This pack gives you all the locks you need for your Phantom-X 5K or 7K drop hitch. The best part? They're keyed alike so you only have 1 key to keep up with. Includes 2 locks for your stacked receiver and 1 lock for your 2" receiver.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• InfiniteRule

This pack gives you all the locks you need for your Phantom-X 16K, Phantom Flip, or tow hitches. And they're keyed alike so you only have 1 key to keep up with. Includes 2 locks for your stacked receiver and 1 lock for your 2" receiver.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• InfiniteRule

Replaces one of the ramps for your Gen-Y Hitch aluminum loading ramp set. Ramp is 7' long and 14" wide. Supports 3,000 lbs. Includes serrated aluminum panels for extra grip.

• Accessories and Parts
• Car Ramps
• ATV Ramps
• Trailer Ramps
• Ramps
• Gen-Y Hitch

Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.

• Accessories and Parts
• Hitch Step
• Trailer Hitch
• Skid Plate
• Gen-Y Hitch

Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into the 2-1/2" stacked receivers providing attachment points for a system head. Secures with included pin and clip.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1500 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Replaces the Y shank on your Gen-Y adjustable stabilizer bar kit. Fits in the back of your 2" stacked receiver and provides attachment points for stabilizer bars.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks