New Arrivals

Made for full-season use, this RV furnace runs without shore power and delivers quiet, efficient heat wherever you travel. Soft Start tech eases power draw, and the airflow design helps warm your rig fast, taking the edge off those cold mornings.

• RV Furnace
• Doored
• 35000 Btu
• 16-1/2W x 7T x 20D Inch
• White
• Dometic

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 400 lbs TW
• 4000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 770 lbs TW
• 7700 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Visible Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 12000 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 3/8 - 1/2 Inch Chain Links
• Red
• Durabilt

You work with the biggest equipment and the toughest loads. This chain binder delivers the strength and control you need to get the job done right. It's built for demanding hauls and rough conditions, so you can count on it every day.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 18100 lbs
• 15 Inch Handle
• 1/2 - 5/8 Inch Chain Links
• Red
• Durabilt

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Chain Binders
• Car Tie Down Straps
• Tie Down Straps
• Ratchet Chain Binder
• Grab Hooks
• 7100 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 5/16 - 3/8 Inch Chain Links
• Red
• Durabilt

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 5200 lbs Axle
• 4200 lbs Axle
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 15123 and 25580
• Race 25520 and 15245
• 6000 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• 5th Wheel Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Standard Grade
• Dexter

Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.

• Trailer Brakes
• Disc Brakes
• Marine Grade
• 5 on 4-1/2 Inch
• Rotor
• 3500 lbs Axle
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 02675 and 25580
• Race 25520 and 02420
• 8000 lbs Axle
• 7200 lbs Axle
• Dexter

Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• 7000 lbs Axle
• Dexter

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• 5th Wheel Trailer
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.

• Trailer Suspension Parts
• U-Bolt Plates
• Snowmobile Trailer
• Boat Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• Dexter