New Arrivals

Replaces the dome, seal, slide, and pin on your Dometic FanTastic roof vent for motorhomes and enclosed trailers. Smoke-colored polyethylene dome filters UV rays while allowing light in.

• RV Vents and Fans
• Replacement Lid
• Roof Vent
• Tinted
• Dometic

With 30,000 Btu of heat, we recommend this built-in furnace for RVs about 30' long. It will get your RV nice and toasty far quicker than a space heater, and it includes a door so the unit can be serviced from the outside.

• RV Furnace
• Doored
• 30000 Btu
• 16-1/2W x 7T x 20D Inch
• White
• Dometic

Made for full-season use, this RV furnace runs without shore power and delivers quiet, efficient heat wherever you travel. Soft Start tech eases power draw, and the airflow design helps warm your rig fast, taking the edge off those cold mornings.

• RV Furnace
• Doored
• 35000 Btu
• 16-1/2W x 7T x 20D Inch
• White
• Dometic

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 400 lbs TW
• 4000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing trailers, campers, and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 770 lbs TW
• 7700 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 150 lbs TW
• 1500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Built for strength and reliability, this Draw-Tite hitch features a fully welded design and no-drill installation. The rust-resistant e-coat and powder coat finish ensure lasting durability for towing small trailers and hitch-mounted accessories.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 350 lbs TW
• 3500 lbs GTW
• Visible Cross Tube
• Draw-Tite

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

• Trailer Hitch
• Custom Fit Hitch
• Class IV
• 350 lbs TW
• 3500 lbs GTW
• Concealed Cross Tube
• Draw-Tite

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 12000 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 3/8 - 1/2 Inch Chain Links
• Red
• Durabilt

You work with the biggest equipment and the toughest loads. This chain binder delivers the strength and control you need to get the job done right. It's built for demanding hauls and rough conditions, so you can count on it every day.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 18100 lbs
• 15 Inch Handle
• 1/2 - 5/8 Inch Chain Links
• Red
• Durabilt

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• 92 Inch Hub Face
• Drop - 4 Inch
• Dexter

Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.

• Trailer Hubs and Drums
• Idler Hub
• Standard
• Pre-Greased
• L44649 / L44649
• Marine Grade
• For 2700 lbs Axles
• 5 on 4-1/2 Inch
• 10 Inch Wheel
• 8 Inch Wheel
• 12 Inch Wheel
• Dexter

Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls. Designed for hydraulic drum brake applications.

• Brake Actuator
• Straight Tongue Trailer Coupler
• Surge Brake Actuator
• Farm Trailer
• Construction Trailer
• Boat Trailer
• Travel Trailer
• Utility Trailer
• Bolt-On
• 6600 lbs GTW
• 2 Inch Ball Coupler
• Drum Brakes
• No Lockout
• Dexter

Hub-and-rotor assembly works with 4,200-lb Dexter disc brakes. Zinc finish protects against corrosion. Vented design prevents heat-related damage.

• Trailer Hubs and Drums
• Hub with Rotor
• Standard
• L68149 / L44649
• Marine Grade
• For 4200 lbs Axles
• 5 on 4-1/2 Inch
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 15 Inch Wheel
• Dexter

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 6000 lbs Axle
• Dexter

Lost a grease cap on the road? It happens. Or maybe you just want to upgrade your caps. This kit gives you 2 chrome grease caps and plugs to keep your hubs sealed and your bearings happy. And the plug pops out for easy access - no mess, no fuss.

• Trailer Bearings Races Seals Caps
• Caps
• EZ Lube Grease Cap
• 2.45 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• Dexter

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• EZ Lube
• ABS
• 25580 / 14125A
• Standard Grade
• For 5200 lbs Axles
• For 6000 lbs Axles
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Smooth and powerful hydraulic jacks upgrade your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Dump Trailer
• 5th Wheel Trailer
• Gooseneck Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter