7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!
This 5" long multi-purpose strap measures 3-1/2" from hole to hole. Bolt holes measure 9/16" in diameter. Corrosion-resistant galvanized steel construction.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.
6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
Replace the keel roller on your boat trailer with this self-centering, polyurethane roller that automatically guides your boat to the center of your trailer as it rolls forward.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal (171225 DL/TB), and a cotter pin.
11" Long x 5/8" diameter steel shaft with zinc plating for 10" rollers replaces a worn-out roller shaft on your boat trailer. Requires 2 cap nuts for mounting (CE10801A); sold separately.
This pintle hook and hitch ball combo lets you haul up to 10,000 lbs with either the 2" chrome-plated hitch ball or with the pintle. Mounts to your channel-style shank. Powder coated forged steel resists rust.
Protect your trailer from theft with this universal coupler lock. Bright orange color deters theft and provides high visibility from afar to make it easy to spot tampering. Keyed-alike hitch lock makes installation easy and convenient.
Run out of room in your vehicle for your gear? We've paired the Curt cargo carrier with our etrailer cage so you can toss your stuff in, lock it up, and forget it. And, if you pack the cage tight you won't need to strap anything down!
Tired of your trailer tossing you around? Curt's Helux pin box smooths things out with a tough coil spring that beats air bags and torsion setups. It's maintenance-free, easy to use, and won't put your RV's frame warranty at risk.
This winch was made to handle your 20' boat. It's rated at 3,200 lbs and offers 2 cranking speeds so you can get the torque you need to manuever your boat onto the trailer. The zinc plating makes it resistant to corrosion.
Tired of your trailer tossing you around? Curt's Helux pin box smooths things out with a tough coil spring that beats air bags and torsion setups. It's maintenance-free, easy to use, and won't put your RV's frame warranty at risk.
This tankless hot water heater has higher Btus for more effectively heating cold water. Heats 2.9 gallons per minute, which is more than an average fixture uses. Includes a door for replacing an old 6-gallon tank water heater.