Roof Rack Includes:
Part Numbers: Y49UV,Y79QR
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
Features:
Specs:
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Specs:
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Aidan here with etrailer. Today, we're gonna be taking a look at the Yakima BaseClip Fit Kit for your Yakima BaseLine FX Roof Rack Kits. Now, this is gonna be the rubber pad and the clamps that actually hold the whole roof rack system in place and make it a custom fit for your various different vehicles. Now, that being said, there's tons of different kits out there on our website for different vehicles, all of those pads are gonna be molded somewhat differently to adapt to different roof shapes, so do plug in your vehicle information into our fit guide and find the right fit kit for you and your vehicle, but it's gonna be a look at the overall system, how it works, and how it functions with the roof rack. So the main two parts of this are gonna be the rubber pad and the clamp, but let's talk about that rubber pad first. It's gonna be custom molded to your vehicle, so you can see really well right here on this lip, it forms around that ridge on the roof and fits snugly into place there to make sure that nothing is moving around and it's fit custom to that area.
Now, the base of that fit kit is what actually clips into the tower here and serves as the connection point between the crossbar roof rack system and your vehicle. That rubber base to it is going to give you the maximum protection and make sure that you're not scratching or scuffing any paint on your roof, and it keeps things nice and sealed up. Now, the stainless steel clip is what also helps to secure it to our roof, that's gonna be the second main component. It's a stainless steel construction and a black powder coat finish, the finish helps it match the whole roof rack system, but it all helps it resists rust and corrosion. Now, the inside of those clips are gonna have a rubber padding, again, so there's no metal on metal contact with our paint or anything, and then you can see here, it's custom fit, hooking inside our door jam, and whenever I close the door, it'll just fit right around there, making sure that it's a nice custom fit.
It attaches up inside the tower right up through here, and it just tightens down, hooking into a slotted opening hole, and then that's what gets it all secured and what helps it join into the tower system. These fit kits come in pairs, one for the passenger's side and one for the driver's side. Now, the reason they do that is because depending on your vehicle, you're probably gonna have a different fit kit for the front and rear. Yakima does a lot of research and development into making sure it's a custom fit for the vehicle, and the one we have it on here today, the Honda Civic, is a perfect example. You can even visually see how much longer the clamp at the back is compared to this clamp up at the front.
So clearly, we're gonna need a different kit for the front end, because there's just less distance for that clamp to travel. So again, plug in your vehicle information to our fit guide, make sure you find the right kits for you, and make sure that you also have the right set for the front and rear. But that's really all there is to it. The BaseClip system is gonna work really well in tandem with that BaseLine roof rack system, and it's really just coming down to making sure you get the right fit for your vehicle, because without that fit kit, you don't have a roof rack. But that'll do it for our look at these BaseClip Fit Kits for your Yakima BaseLine Roof Rack Systems.
Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (688 Customer Reviews)
This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.Worked as expected. Etrailer shipped them on time and they showed up a day early
Shipped faster than the product was available from Yakima!
Thank you
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of eTrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
I purchased the:
•Yakima 50in Jetstream crossbars
•Yakima baseline towers
•bc182 & bc183 clips
•Yakima 46in fairing
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.
Works perfectly on my 2023 Chevy Silverado. The rubber pads are soft enough to prevent scratches, yet firm enough to support the force of being cranked down on the roof. They fit perfectly in the ridge near the edges of the rough.
Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job.
Overall these are a great product and much needed. I had a Tiguan with the side rails but needed cross rails for my gear. When I got my Jetta I wanted to keep my Yakima cross rails so I needed the Towers. They work great and fit my car well. I took them off recently after having them on for a year for re-fitment.
I ordered the Yakima "aero" bars , baseline towers, and BaseClip kits for my 2019 Honda Civic 5 door. While expensive the quality is excellent and it was a pleasure to assemble such a high quality and precision engineered product. It fits perfectly on my new car and the "aero" bars are quiet even at freeway speeds. Highly recommended.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
Works just like the old towers except they pivot to give a snugger fit on the truck, which makes this tower fit easier and less likely to come loose or break like the other towers. Also it is nice to have a rack on the front of the cab for long items, like full size canoe, that would be too long and need the extra length to fit. Without the extra tower the canoe has to shift back and hang off the back too much and securing the front of the canoe is more challanging.
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
Arrived as part of a set of components for a roof rack and kayak carrier. I liked that etrailer had a guide to get the right components to fit my car's make and model year. This baseclip set arrived quickly, but the set for the rear of the car that arrived with them were obviously returns that had not been inspected. That set was missing parts, requiring follow-up calls to arrange for a new replacement for the incomplete set, and about a week's delay in getting the rack up on the car.
These are great, and it is so nice to get a custom base clips that match the angles and contour of the sides of your roof. Makes it look very clean. These are made very well and for sure these will last a long time like my other Yakima products.
The clips are fine . I will review etrailer. I needed just clips I asked them which ones they told me. Great place.
Clips are perfect and the etrailer.com experience was great. Ordered on a weekend and had the clips as promised by the following Wednesday.
Base clips arrived quickly and worked just as expected. Make sure you know the model that you need before ordering.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Yakima Accessories
Fit to this rack on your 2000 Ford F-250 Super Duty
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ford F-250 Super Duty Accessories
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.