SnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-081,C31068
Our Price: $2,443.38
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meSnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall
part number: SB324-081
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 84" wide x 22" tall
- Height adjustment: 9"
- 3 Blade angles:
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 335 lbs
- 1-Year limited warranty
Note: Due to the size of this item it ships via truck freight.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-081 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31068
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31068 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Replaces 31057
Replaces 31368
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 84" Wide x 22" Tall - SB324-081
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31068
Average Customer Rating: 4.8 out of 5 stars (175 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: John03/21/2024
This hitch is high quality and fit perfectly. Install was relatively easy. I needed this hitch because I tow a travel trailer and need to carry my bike rack and bikes as well. I can move the bike rack to my rear factory hitch when I'm not towing, very simple.
The pictures show my truck / RV with my bike rack installed in the front hitch.
by: Glenn05/30/2020
2010 Ford F-150 Raptor
This is the third Curt front receiver hitch I have used on vehicles. The hitch was good quality with clear instructions included. It definitely helped during installation that I had a friend and shop to do the install as the ends had to be spread a hair to slide around the frame rails. We had the hitch installed in about 20 minutes. The reason for the average rating is that this is supposed to fit the 2010 Ford F150 Raptor. Although it does fit, you cannot reinstall the skid plate without sever modifications and then, the skid plate would just be for looks. The end of the hitch also sits behind the bumper requiring me to purchase a hitch extension in order for me to install my receiver mounted winch. I bought the RM-071-1075 from etrailer in order to mount the winch. Recently I had to use the winch and had no issues with this set up doing a straight pull. When we tried to pull at a slight angle, I was afraid of exceeding the capacity of the hitch due to the extra leverage caused by the extension (big heavy Raptor on 37's buried in mud and snow). Overall I would have given the receiver hitch 5 stars if the description mentioned that there would be issues installing on a Raptor. I probably would have done a traditional bumper mounted winch but I like being able to move the winch front to back (which is how I ended getting out of the situation).
by: Daryl S03/20/2014
2011 FordF-150
This is my second Curt Front mount Hitch Receiver I have purchased. I use it to launch my boat and wave runner.
The mounting instructions need to be corrected.
I placed this receiver on the front of a 2011 Ford F150 4wd.
I found it easiest to place the Bolt on Forward passenger side first.
The instructions said to place bolts and bushings from inside.
There is not enough clearance between the radiator and the frame to place the bolt from inside out. I found it easiest to mount with the nuts closest to the radiator.
I did not trim the bumper fascia and it still fits perfect. (plastic has some give)
The 5/8 fish wires are great! All hardware is packaged and taped to Hitch.
Daryl S.
3/20/2015
It has been well worth the purchase. Still works great! No regrets.
by: Caleb Carroll03/26/2019
2011 FordF-150
The hitch was out of square upon delivery, which was discovered when trying to install it. After calling customer service, prompt advice was given which allowed us to return the hitch to square and install safely without marring or voiding warranty. Assistance was detailed and concise and we will very likely utilize etrailer for future vehicle needs.
This hitch was purchased for the purpose of attaching a snow plow to our pickup and fit well after slight modification.
Caleb C.
3/27/2020
We have used this attachment with a snow plow about 6 times now and it has worked very well for us.
by: Craig 11/26/2022
2012 Ford Expedition
Well made hitch receiver, clear installation instructions, simple to do
Customer service great
Super convenient front hitch for snow ploughing or winch on my Expedition
Craig
11/27/2023
One year later and the front hitch is still great. Highly recommended
by: Tom T.10/05/2014
2014 FordF-150
This is my 3rd front hitch from etrailer, and it was a perfect fit. Installed on my 2014 F150 to allow for the installation of a hitch mounted rod holder. Will definitely make future purchase from these guys.
Herb H.
2/28/2016
Tom, I have a new F150 2015 that I also purchased at Larson Ford, want to do the exact set up you have, but I plan on taking truck on beach do you take it on beach and if so any problems with clearance. I would appreciate any other comments you may have about this set up. Where did you get rod holder.
Tom
2/29/2016
Herb, theres plenty of clearance for beach driving and the rod holder was purchased at Murphys Hook house on rt. 37
by: Steven Y.08/09/2023
2014 FordF-150
easy to install with right tools and a ramp or lift
instructions did not state to torque nuts you need a deep socket 15/16"
main reason is to use snow plow on driveway
by: John01/01/2024
I’ve owned a Manuelly operated snow plow for 15 years. the plow frame slides into the receiver of a 2’’ trailer hitch that can be used on either the front or back of the truck. After many years of sore necks plowing in reverse and many funny looks when people saw me in action !!! Thanks to your product I now plow forward like a normal plow !!! Lastly the local place I bought the plow from wanted literally double the price you gave me.!!!
by: Jeff06/27/2022
2010 FordF-150
Very easy to install. Took me roughly 30 minutes, and as long as you trim the front valance 1st thing, goes quick and easy. We are heading out to the outer banks of nc to do some surf fishing and I wanted to be able to mount my fishing rack on the front of my truck instead of the back so I could open the tail gate and this hitch setup is perfect. Awesome product and anyone who has any mechanical knowledge, this is a piece of cake.
by: Bill H.04/02/2019
Backing a short trailer like my teardrop by yourself can be a challenge. By the time you see the trailer respond to steering it's too late to make easy corrections. I installed the front hitch to allow me to see everything while pushing the trailer into the tightest spaces. The installation was made easier with my motorcycle lift. Written instructions were good but viewing the video from the website first is definitely a good idea. Fit and finish are excellent as are etrailer's knowledgeable staff. Very happy with my purchase and will look to etrailer for my next purchase.
by: Rodney06/13/2019
2010 FordF-150
2009 Ford F150 4x4 front hitch is/seems to be of solid construction... weld/vent holes on tubes could/should be smaller so that excessive water/contaminates couldn't/can't get inside to help prolong life of material.
I installed by self, had no one to help me...hardest part of installation was measuring the center point of air dam... had to use flexible tape measure to wrap around arch of air dam... also used a floor jack to lift and hold hitch in place, until pushing of bolts through front mount holes... personally, but did work alright, the fish wires were bit short for rear mounting bolts to fish from front of frame opening, and working through the factory tow loop mounting bolts...
The measurements for opening to cut in air dam, personally, are a bit excessive, the opening is a little bit larger than needed, but looks alright... instruction sheet says professional install time 30 min, and 60 min for novice/me, took me 45 min., so installation is very easy, also the instructions state tools needed, they should say a ''deep well'' 15/16 socket, standard socket will not tighten the 5/8'' nut on rear mounting bolts.
Ground clearance is excellent, 10 1/2 inches from center of tube to the ground, stock ride 2009 F-150 no lift/leveling.
Overall product looks/will work excellent for my application/purpose.
by: Stephen11/15/2023
2011 FordF-150
This was a very tight fit on my 2011 F-150 Ecoboost. It basically sits flush with the bottom of the intercooler and if you don't raise it up perfectly level when installing it, its difficult to get the bolts in. Initially I thought it was not going to fit. That said, the hitch works great, i use it for a receiver mounted, light duty plow setup and love it. The install took about 40 minutes and I did it myself, with the help of a floor jack holding up one side. If i Had to do it again i would make sure i had a friend over to help.
by: Steve B.10/01/2019
I purchased the front receiver hitch for my Ford F150 so I could attach a snow plow. I installed it myself, and it was an easy installation. It took about an hour, but the instructions were great, and had a great step by step guide. I also watched the instructional video to make it even easier.. It fits perfectly, and is tucked up nicely in the front. I would highly recommend this hitch if you need to put a receiver hitch on the front of your vehicle.
by: Erik H.10/01/2017
I got this for maneuvering boat trailers in tight spaces and will probably get a winch mount at some point too. It is easy to install. You will need to make sure you have the appropriate torque wrenches available and it definitely helps to have ramps to drive the front wheels up on. Another tip is to fish the bolt carrier coil from the back through the bolt hole and then out the front of the frame before putting the bolt in the coil and drawing it back to the bolt hole. Don't curve or bend the bolt carrier, in fact try to keep it straighter than how it arrives so with a little jiggling it won't hang up in the frame rail. That makes it really easy. I was able to install it myself in under an hour even after wasting a little time initially trying to fish the wire through from the front. I added a Curt cap to keep out of the front hitch while driving.
by: James07/17/2018
Pontiac Trans Sport Van
We are VERY happy with the front hitch. We pull a camper and rather than put the bikes on the roof this was a great alternative. We took our grandkids camping last summer and we were able to transport all the bikes. The bikes are below the driver's field of vision which was our initial concern, no problem. The hitch was a great price and we had a local garage do the install in one afternoon for $90.00. While it may look a little different than most traditional rear hitches, it is perfect for our needs!
by: Rik C07/08/2019
2017 Ford Expedition
I purchased this hitch for a 2017 Ford Expedition. This is the second hitch I have purchased from etrailer, the first being on my previous truck, a 2006 F-150. Ordering was easy, shipping was quick and customer service was super helpful.
Not counting the time it took to get things together, it took me a hour to install the hitch by myself. Lifting the hitch in place by myself was a little awkward, mut I managed and it was easier once I got the first bolt in place.
The directions were good, except they were written for a F-150. There are slight differences between the 150 and the Expedition. I was able to figure these out easily enough, but it would have been nice if the instructions mentioned them.
The biggest difference between the instructions and my vechicle is I did not need to trim the fascia. Fortunately I lifted the hitch up and did a dry fit and discovered this before I trimmed anything.
The other thing that was not mentioned in the instructions is there were dividers on each side of transmission cooler that attached to the lower air dam. I secured these to the hitch with zip ties when I was finished with the install.
My bike rack fits nicely on the hitch. At first I was worried the hitch would sit too far back but there is just enough clearance when it is installed.
All in all, it looks nice, was easy to install and now I can take bikes with me camping.
by: Dave 11/30/2023
2011 Ford Expedition
Because of health issues, I had a local truck store install this for me. 4 bolts and it was on. It was installed on a 2011 Ford Expedition. The first thing I had to do was install a 6 inch riser connector to raise it up. Then I installed a motorcycle carrier that weighed around 40 pounds. Lastly, I mount a 2004 Honda 250 Rebel onto that carrier which weighs around 330 pounds. All in all, I'm pushing the maximum weight limit of 500 pounds but it handles it wonderfully. Very satisfied with my purchase!
by: Garrett01/09/2018
2017 GMC Terrain
The CURT hitch was extremely easy to install. It probably took me 45 minutes. No drilling, instructions were easy to follow and you can hardly see it once it is installed. Thanks again for your support and follow up. I would order again from etrailer.com. Here are a few photos of what I use the front end hitch for.
by: Rich L04/17/2016
2011 FordF-150
Excellent product fast delivery! The front mount trailer hitch fit perfectly on my 2011 f150, was easy to install, within an hour, the instructions were accurate. I used my motorcycle jack to raise the hitch to position. See pics. I use the front hitch to position my boat in tight spots.
Thanks for a great product
Rich
by: Troy11/21/2018
2013 Ford Expedition
Very solid product and easy to install. Took me about an hour to install. I installed by myself. I put 2x4's underneath to support the hitch and it actually lined up perfectly with the holes on the truck. I am using the hitch for a snow plow.
by: Allen09/01/2023
I can only comment on the condition of the box and shipping carton. It was in poor condition. Opened at every seam, pactched and taped plus restapled. I just hope product is unharmed.
by: Joe01/07/2018
2013 Jeep Wrangler
Better than a snowblower!! Made very well, had it put together and mounted in a couple hours. Used it for two small snowfalls and it worked as expected. Great customer service from etrailer!
by: Baja road trip09/03/2020
This time last year I prepared my truck for a 3k plus trip to Baja. My motorcycle needed to mount on a front hitch being that my Airstream was towed on the back,. Not a single problem a year later. The round trip drive as well as the local rough roads caused a lot of wear and tear on everything Not the hitch. Now I use the front hitch for my Thule Fat tire rack. I am really happy to have an added hitch on the front of my truck
by: Curtis03/11/2018
The front mount hitch showed up in a couple days and was in great condition. The directions were top notch and the hitch fit as described. Took me less than an hour to install, and that included a trip to the store to get a deep well 15/16th socket (my standard 15/16 wouldn't fit onto the nut, and you need a solid fit when going to 210ft-lbs).
I had read a review that said a hitch extender was needed with this mount, but my bike rack fits without an extender (barely - less than an inch of clearance, but it fits).
by: Patrick 10/30/2023
The item was described well online. The video was excellent. The shipping was super fast. Good Job, keep up the good work.
25
175
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Does Snowbear Plow Come With Front Mounted Hitch?
- The SnowBear Personal Snowplow, # SB324-081, does not come with a front-mounted hitch, but there is an option available for your 2017 Jeep Wrangler. I recommend the Curt Front Mount Trailer Hitch Receiver, # 31432, which is a two-inch hitch that bolts on and is a is custom-fit for Wranglers.
The SnowBear offers accessories which are designed to make things easier on you, such as the Lighting Kit, # SB324-127, which mounts to the frame of the plow and simply wires to your Jeep's battery.
view full answer... - Will Snowbear Plow part # SB324-081 Fit Well on 2014 Ford F-150
- With the Curt hitch part # C31068 installed on your 2014 Ford F-150 the Snowbear Plow part # SB324-081 that you referenced would fit and work well without any adverse effects on the truck.
view full answer... - Front Mount Trailer Hitch for 2001 Ford F-150 for SnowBear Snowplow
- I have good news all around because there are front-mounted trailer hitches that fit both your 2001 GMC Yukon 1500 and 2001 Ford F-150, and your SnowBear Personal Snowplow for 2" Hitches # SB324-081 will fit on both trucks.
- 2001 Ford F-150 Front Mount Hitch: Draw-Tite Front Mount Trailer Hitch Receiver # 65025
Both of these hitches will work great and allow you to mount your snowplow.
view full answer... - Recommended Snow Plow for a 2017 Nissan Titan XD
- As long as your front mount hitch receiver on your 2017 Nissan Titan XD was between 7 to 13 inches from the ground that the Personal Snowplow # SB324-081 that you referenced will fit. My contact at SnowBear confirmed this. The photo you are referring to is just a generic photo from the manufacturer.
We also supply accessories for the SnowBear Snowplow like the Caster Kit # SB324-126 which allows you to wheel the snowplow when bringing it out of storage or putting it away into storage.
view full answer... - Wiring for SnowBear Personal Snow Plow
- According to the control box wiring diagram (see attached) 2 of the wires for the SnowBear Personal Snowplow for 2" Hitches # SB324-081 go to the electric winch and 2 of them go to the battery. The only other thing that you might have is a switch for light accessories but the black wires for that setup go to ground.
If none of this matches what you have then go ahead and send me a photo and/or a part number for the box you are looking at and I can see if there is anything else I can find out.
view full answer... - Is it Okay to Back Drag Snow with the 84" Wide SnowBear Personal Snowplow for 2" Hitches
- Yes, I spoke with my contact at SnowBear and they confirmed that you can back drag with the Personal Snowplow for 2" Hitches # SB324-081. It won't perform nearly as well, but it can be used for this application.
If you don't already have a front mount hitch receiver on your vehicle just let me know the year/make/model and I can make a recommendation for you!
view full answer... - Plow Recommendation for 2002 Chevy Avalanche with Front Hitch
- For a hitch mounted plow for the type of application you mentioned I really like the K2 # K2AVAL8219. It's 82 inches wide and 19 inches tall that uses a winch motor to raise and lower. It also comes with a wireless remote to make operation and install easy.
view full answer... - Solution for SnowBear Snow Plow that Wobbles When Raised Up While Traveling
- I spoke with SnowBear about the issue you described and they said it sounds like you aren't using the safety chain that came with the plow which was designed for removing the play you are describing. There's more info on it on pages 13 and 14 in the manual of the plow. Secondly, vehicles with plows connected should NOT travel on roadways without the safety chain installed, as this may result in serious damage to the roadway, plow and vehicle and may cause serious injury to the operator.
view full answer... - Snowbear Plow Receiver Hitch vs Custom Mount
- The biggest difference I have seen between the two style is in the amount of play they have side to side. While it isn't a ton there is more play in the single connection point than what you will get out of the custom frame bracket types. We carry both types here but given the choice I would go with the custom bracket version. If you plan on moving it from one vehicle to another from time to time then the hitch mount is the way to go for ease of use.
There is a great option with custom
view full answer... - Can SnowBear Plow be Used with 2004 Jeep Grand Cherokee
- With a front hitch installed on your 2004 Jeep Grand Cherokee like the Curt # C31048 you can use a SnowBear plow like the part # SB324-081 that you referenced which was designed to attach to 2 inch hitches.
view full answer... - Front Mount Hitches for 2007 Jeep Wrangler and 2011 Ford Escape for Snowplow
- We have front hitches that will fit your 2007 Jeep Wrangler, like the recommended Draw-Tite # 65069, but these are designed to fit with the standard factory bumper. Since you have an aftermarket bumper you will need to check out the linked installation instructions to try to determine if this will fit with your bumper or not. If it won't then the only way for you to get a front mount hitch on your Wrangler is to have one fabricated.
According to SnowBear the max height a hitch receiver
view full answer... - Front Hitch for 2006 Jeep Commander to Mount SnowBear Personal Snowplow
- Since the SnowBear Personal Snowplow part # SB324-081 is designed to attach to a front hitch what you'll need is a front hitch designed to fit your 2006 Jeep Commander like the Curt # C31056 and you'd be set.
view full answer... - Do You Have a Wiring Diagram for the Snowbear Personal Snow Plow # SB324-081?
- I went ahead and attached the wiring diagram for the 84-Inch Wide Snowbear Personal Snow Plow # SB324-081. If you need assistance with reading voltage when customizing your switch, I recommend using a circuit tester like the # PTW2993.
view full answer... - Snow Bear Plow Recommendation for Fitting 2004 Jeep Grand Cherokee Laredo
- In order to use a Snowbear plow on the front of a 2004 Jeep Grand Cherokee Laredo you'll need to use the one that installs with a front hitch. So for the front hitch you'd need the part # C31048 and then for the plow you'd want the part # SB324-081.
view full answer... - Does Curt Front Hitch # C31068 Fit 2010 Ford F-150 4 Wheel Drive
- Yes, the Curt hitch part # C31068 that you referenced does fit your 2010 Ford F-150 4 wheel drive. We add the letter C to the beginning of the part number since the brand is Curt and it helps organize Curt products in our systems but it's the exact same hitch. I attached an install video for this hitch for you to check out as well.
view full answer... - Recommended Front Mount Hitch for 2009 Ford F-150 with OEM Skid Plate
- There are two available front mount trailer hitches confirmed to fit your 2009 Ford F-150, both of which will install in roughly the same manner and sit in the same location under the vehicle.
I spoke with my contact at Curt regarding the Front Mount Trailer Hitch Receiver # C31068 and he stated that this will fit with the OEM skid plate on your truck and you will not need to alter it for proper installation. As long as the skid plate you referenced is from the factory, this hitch will
view full answer... - Can Front Air Dam be Reinstalled After Installing Curt Front Hitch on a 2012 Ford F-150
- The air dam has to be permanently removed on a 2011 and newer For F-150 to install Curt front mount hitch receiver # C31068. Installation on your 2012 F-150 will be basically identical to the 2014 model in the video I have linked showing an example installation.
view full answer... - Does Air Dam Get Reinstalled on 2014 Ford F-150 After Installing Curt Front Trailer Hitch
- I spoke with my contact at Curt about front hitch # C31068 for your 2014 Ford F-150 4x4. He said that you could trim the air dam and reinstall it after the hitch is installed but it is difficult to do so. As a result most people end up leaving the air dam off.
view full answer... - Front Mount Trailer Hitch for a 2012 Ford F-150 with EcoBoost Modified with FX Offroad Package
- Since your 2012 Ford F-150 with EcoBoost has been modified or upgraded the only way to determine fit of a front mount hitch, other than trying to install it, is to compare the instructions I have linked to the right for hitch # C31068 and # 65061 with the area on your truck.
But it shouldn't be a problem because both of these hitches fit all models of the 2012 Ford F-150. They just have not been tested on a model that has been modified to be like another model.
view full answer... - How to Finding Center Point of Front Bumper Fascia on 2013 Ford F-150 STX for Hitch Installation
- The installation instructions for the Curt Front Mount Trailer Hitch Receiver # C31068 are linked for you at right and these include in step one a diagram of the lower plastic bumper fascia trimming required. The exact dimensions for trimming vary slightly between the 4X4 and 4X2 versions of the truck. You will make either a 3-1/2- x 1-3/8-inch cut (4X4) or a 3-1/2- x 1-inch cut (4X2). Use a measuring tape to find the center point on the fascia.
view full answer... - Will Front Mounted Hitch Interfere with Grille Guard on 2009 Ford Expedition
- If you already have the Westin Sportsman Grille Guard # 40-2405 or the similar Polished Stainless Steel version installed on your 2009 Ford Expedition you will not be able to add the Curt Front Mount Trailer Hitch Receiver # C31068 as there would be interference.
view full answer... - Recommended Front Mount Hitch for a 2011 Ford F-150
- To add a front mounted hitch to your 2011 Ford F-150 you will need the Curt item # C31068. It has a 2" receiver and a 500 lbs vertical load limit so it will work great for a bike rack.
I have linked an installation video below to help you get it set up.
view full answer... - Fit and Compatibility of Curt Front Hitch C31068 on 2014 Ford F-150 EcoBoost
- The Curt front mount trailer hitch # C31068, is designed to fit 2011 to preset Ford F-150 4x4 trucks with EcoBoost. These are some installation notes mentioning some trimming or complete removal of front air dam and/or fascia may be required for installation.
I have linked an installation video of this front hitch being installed for you to check out.
view full answer... - Can Curt Front Mount Trailer Hitch # C31068 for a 2009 Ford F-150 Hold a Bike Rack and 4 Bikes
- According to the instructions for the Curt Front Mount Hitch, # C31068, the tongue weight capacity for the hitch is 500 pounds. While this is enough capacity to handle a 4 bike rack and 4 bikes, you will need to check the owners manual for the front axle capacity to make sure that you do not exceed it. I have included a link to the installation instructions for you to view. This hitch fits 4 wheel drive models of the 2009 Ford F-150.
Another factor that may be an issue is visibility.
view full answer... - Front Hitch and Snow Plow Recommendation for 2017 Ford Expedition
- For a front hitch confirmed as a fit for your 2017 Ford Expedition you need the part # C31068 which will then allow you to use a plow like the K2 # K2AVAL8219 which would work well.
I really like this plow as it doesn't require any winches or wiring to use and it work very well. It would be perfect for a drive way.
view full answer... - Parts Needed to Attach SnowBear Snow Plow to 2013 Ford F-150
- If the Snowbear plow attaches to the vehicle with brackets and not a front hitch the kit you need is the part # SB397-105.
If instead you need a front hitch you would want the part # C31068.
view full answer... - Is There Trimming Involved for Installing the Curt Front Hitch C31068
- To install the Curt Hitch part # C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.
view full answer... - Comparing Installation of Curt C31068 vs Draw-Tite 65061 on 2010 Ford F-150
- I spoke with my contacts at Curt and Draw-Tite and was given the following information.
Installing the Curt Front Mount Trailer Hitch Receiver, # C31068, on the 2010 Ford F-150 Supercrew 4x4 with a straight down air dam will require some minor trimming to the fascia. As for the skid shield he said more than likely this hitch will not require that you modify the skid shield. As for the oil filter, he said the hitch should not interfere with your access to the filter.
According to
view full answer... - Is Air Dam Trimming Required for Front Mount Hitch Installation on a 2010 Ford F-150
- Yes, you will need to trim a 2-1/2 inch wide by 1-1/4 inch high spot on the bottom of the plastic air dam, and if your vehicle has a rear air dam installed, behind the forward lower air dam, you will need to remove it also. This hitch will only fit the 4 Wheel drive 2010 F-150.
We have not had the opportunity to install this hitch on a 2010 Ford F-150 yet or do a video installation. We do have a link on our site to detailed instructions for you to review.
We also have the Draw-Tite
view full answer... - Front Mount Trailer Hitch for a 2011 Ford Expedition with 2-Wheel Drive
- For a 2-wheel drive version of the 2011 Ford Expedition you will need Curt front mount receiver # C31068. It fits both 4x4s and rear wheel drive models. I have included a link to the installation instructions for you to view.
view full answer... - Front-Mount Hitch Fit for 2017 Ford Expedition 4WD
- Yes, Curt 2-inch front-mount hitch # C31068 is a confirmed fit on your 4WD 2017 Ford Expedition. The hitch includes all required mounting hardware and installs without drilling. An installation video is linked for you.
view full answer... - Does the Skid Shield Need To Be Removed When Install Curt Front Hitch On a 2014 Ford F-150 Raptor
- I spoke with Curt about installing the Curt Front Mount Trailer Hitch Receiver part # C31068 on a 2014 Ford F-150 Raptor and they informed me that you can keep the skid shield as the trailer hitch installs on the outside of the frame rails and the skid shield installs on the inside of the frame rails. However, you will need to do some trimming but you should still be able to keep the skid shield.
view full answer... - Will Curt Front Mount Trailer Hitch Fit 2011 Ford F-150 SVT Raptor
- I checked with the manufacturer and am happy to confirm for you that the Curt Front Mount Trailer Hitch Receiver # C31068 will absolutely fit your 2011 Ford F-150 SVT Raptor. This is a no-drill installation that will give you the 2" receiver you are looking for on the front of your truck.
I have added a link to the instruction manual for you to check out as well.
view full answer... - What is the Difference Between Curt and Draw-Tite Front Hitches for a 2013 Ford F-150
- If you look at the instructions I have linked for both the Curt front hitch # C31068 and Draw-Tite version # 65061 you will see that they are both positioned in basically the same place on the 2013 Ford F-150.
Both have 2 inch receivers and are rated for 500 pounds vertical pull and 9,000 pounds line pull. They are also comparable in size.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Video by:
Andrew K
Written by:
Laura H
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Glenn
6/6/2021
Still working with no issues.