bing tracking image

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SB324-080,33328

Retail:$2,642.53
Our Price: $2,421.16
You Save: $221.37
Snow Plow
This item qualifies for Free Shipping

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.

Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric winch allows you to easily raise and lower plow
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required


Specs:

  • Application: 2" x 2" front trailer hitch receiver
  • Blade dimensions: 82" wide x 19" tall
  • Height adjustment: 9"
  • 3 Blade angles:<>
    • Left 22 degrees
    • Straight ahead
    • Right 22 degrees
  • Winch lift capacity: 3,000 lbs
  • Weight: 315 lbs
  • 1-Year limited warranty


Notes:

  • Due to the size of this item it ships via truck freight.
  • Bottom of 2" receiver tube must be 13" from the ground.

This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

WINCH

The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.



324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 33328

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 350 lbs
  • Gross trailer weight: 3,500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



33328 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 33328

Average Customer Rating:  4.6 out of 5 stars   (41 Customer Reviews)

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Mike07/25/2023

This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.



by: Linda 01/09/2024
2006 HondaRidgeline

Needed a front hitch for a 2006 Ridgeline Honda truck. I found it on etrailer.com and a better price for same hitch on another online store. As I talked with the customer service agent, I was also offered a discount which was quite a surprise. Shipping was very fast. Had it installed on my truck so I could attach a mounting hitch and snow blade. I am extremely happy with this hitch and etrailer.com.



by: Robin G.11/18/2014
2011 HondaRidgeline

We live just south of Buffalo and Put this on our '11 Honda Ridgeline with a snowsport plow and a week later it snowed, and snowed and snowed... 5 feet in 24 hours and it's still snowing.... It's not good.... It's AWESOME! Not one driveway or even our street is clear... Except ours. It was easy to put together , easy to install and works exactly like it's advertised!
It's November and it paid for itself already. Communication with etrailer was exceptional. We could not be happier with the whole setup.

Greg C.

1/8/2015

Hi Robin:I have a 2012 Ridgeline and I was wondering how the plow is working for you.Thanks much.GregTraverse City, MI

Robin G.

1/8/2015

Still working very well! The only thing we had to do was re tighten some of the mounting bolts but we did give it quite the workout! The rack it sits on is scraped up from use but that is completely expected and we will just sand and spray in the spring before we put it away. No complaints... Its a well built, sturdy unit. I would buy again in a heartbeat!

Dan

4/26/2015

What modifications on your Ridgeline did you have to make to install your hitch receiver?Thanks for your help.



by: James03/04/2023

They asked for a review a year later, AWESOME! I love the front mount on my '13 Ridgeline for a snowsport "floating plow" I bought thru AgriCover. My Ridgeline plows the whole neighborhood now!!!



by: John12/20/2023

It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.



by: Bill11/17/2023

The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!



by: Thomas08/02/2021

Great service from etrailer, not so good manufacturing by Curt.

The following advise is for a 2007 Honda Ridgeline.
I purchased this hitch in order to push my 21 foot travel trailer into a tight parking area at the side of my house where reversing it in with the tow vehicle is difficult.

Be aware that the mounting holes on this hitch do not quite match, they are slightly off, enough to make mounting a problem that may lead to damaged bolts or even cross threaded bolts. Do yourself a favor and get a 1/4" round file, then file the two elongated holes on the center flange towards the forward edge and away from the hitch receiver to make them longer. Then file the two mounting holes on each of the outer flanges inwards toward the center or hitch receiver tube and elongate them.

Dry fit the hitch making sure the bolts go into the threads easily, they are fine pitch and are easily cross threaded and damaged, make sure they ALL go into the chassis nuts without trouble because in the final assembly you will also be dealing with the splash guard, which will be hampering your final assembly.

Etrailer Expert

Sierra K.

8/9/2021

Thank you for your detailed review. Because you are installing on a 2007, weld nuts must be cleaned or else it will be difficult to install. Another thing which may have happened, is some flex in the receiver, which would account for it not fitting exactly right. I will attach a help article explaining more:



by: Danny 10/09/2022

Desided not to install due to the low ground clearance issues.. otherwise the quality and craftsmanship is excellent.. also concerns of front end chassis flexing and steering alignment issues if high loads were imposed on hitch.. may install in the future



by: James05/10/2021

I had some difficulty lining up the bolts but suspect that is my issue rather than the product. So far I have only used it once for a camping trip with a rack designed for an ATV (rack is offset for ground clearance) and that worked well. I also plan to use for a small bike rack when 4 bike rack in back is overloaded. Puts more utility in my SUV, always a good thing.

James

5/13/2022

Great, every SUV should have a hitch and having two is just so much better.



by: Michael 12/30/2023

Works well for the price.



by: Bruce G04/07/2020

The good news is the hitch fit and it helps with getting the boat into the garage with a curved driveway. It was extremely hard to get the bolt holes aligned. If the front screws Had an alignment pin and if the bolt hole were larger it would have helped. I ended up stripping one front screw.

Bruce G.

4/8/2021

Still using it and it is working well.



by: Albert01/23/2013
2005 Honda Pilot

I plan on using this to assist me in backing my travel trailer into a small side yard next to my house and my neighbor's fence. Backing it into this small area has been extremely nerve wracking as my home air conditioner unit is close to the house and trailer. Now I will have the luxury of making sure nothing is damaged. and better yet the front hitch will be hidden under the car and out of the way.



by: Matt 09/06/2022

I needed to have my local mechanic install this - not from any fault of the product but the rusted bolts in my truck got so tight that the nuts internal to the frame members broke free of their welds. It's not really been used much but seems like it will do the job when called on!



by: James10/04/2016

I was a little surprised with the snow plow. I thought it was going to be hydraulic/electric. It does okay, going on flat and slight declines. Inclines not so good. I also. Bought a rear trailer hitch. Very pleased with it.



by: George11/03/2022

This may be more of a fault of the vehicle than the hitch. There is 4 bolts that need to be removed from the vehicle (Honda Ridgeline) bumper reinforcement bar that have hidden welded nuts that snap loose due to an accumulation of rust.
Upon further inspection of the reinforcement provided for the vehicles front end, I am not sure using this hitch to mount a snowplow won't be compromising to the vehicle's structural integrity in the long run.



by: Kevin01/15/2019
2008 HondaRidgeline

Couldn't have asked for a better product! So simple to add a front hitch to my 2008 Honda Ridgeline. Was done in 45 mins. Highly recommended to all my ridgeline friends.



by: Ronald 08/22/2022

Works great. Had to get an extension to attach my winch.



by: Jennifer 01/20/2021
HondaRidgeline

I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.



by: Efrain01/25/2015

The Curt receiver arrived in a few days after ordering and it was an easy install. I would recommend to anyone.



by: Bliss01/04/2018

I LOVE my Curt front-mount trailer hitch. I installed it myself, and while I wouldn’t say it was “easy”, it was reasonable. The instructions were clear and the fit was perfect. I bought the hitch because I have a boat and a travel trailer that I need to maneuver in a fairly small space. I considered an electric trailer mover, but the hitch was much less expensive, and it is with me wherever I go. The front hitch makes it extremely easy to move the boat and the travel trailer with great precision. You have good visibility of the load, and because the hitch is so close to the front (steering) axle, it is very easy and intuitive to make small directional adjustments.



by: Thomas K.11/17/2018
HondaRidgeline

This hitch will probably outlast the truck. Very beefy and well designed, all bolt holes matched up perfectly to the Ridgeline subframe. I purchased it, along with a removable winch mount and quick-release 12V. battery cable connectors, so that I can keep my winch out of the way and locked in the tool box when not in use.

(Unfortunately, the removable winch mount that goes into the receiver, and which I bought from a different manufacturer, is flimsy compared to this unit).



by: Ronnie06/19/2019
Honda Pilot

This my third front hitch and they work great for my purpose. I am a pilot car for oversized loads this works great for front sign and as a carrier for the high pole each one has fitted properly and work great Thanks Ronnie



by: JimK12/22/2016

Love Curt, second one I have bought. This one came with a crazy little skinny wire tool with a spring on the end so I could pull a bolt and washer 12" through a steel tube on the car and make it hang down so I could put a nut on it for the hitch. Amazing. Genius! American ingenuity! (And BTW, I love etrailer, too. They have so much stuff, and not just for your trailer but your car, too! And all kinds of helpful videos. I know this sounds like a commercial, but it isn't. I'm real and hard to impress, but these guys are impressive.)



by: Timothy02/27/2020

etrailer has been a great!!! They have been updating me on all the shipments.



by: Lee06/10/2019

This was the easiest purchase and installation of a hitch I've ever done. I have already told my neighbor about e trailer and I'll keep referring them to anyone looking for a hitch.


25
41
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Snowplow for a 2020 Jeep Wrangler
  • It sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle. We do not carry ACI plows unfortunately.
    view full answer...

  • Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch Hitch
  • For your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
    view full answer...

  • Parts Needed to Mount Snow Plow to 2010 Ram 3500
  • The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065. If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup. For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
    view full answer...

  • Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
  • Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about: - Draw-Tite Front Mount Trailer Hitch Receiver # 65080 This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
    view full answer...

  • Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
  • Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
    view full answer...

  • Replacement Spring for SnowBear 324-080 Snow Plot
  • I have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break. We do also have some other parts available for
    view full answer...

  • Recommended Snow Plow For A 1994 Jeep Wrangler
  • I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow. We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
    view full answer...

  • What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
  • I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is
    view full answer...

  • Snow Plow Recommendation for a 2002 Jeep Wrangler
  • Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you. I attached a review video for this plow for you to check out as well.
    view full answer...

  • Snow Bear Plow Recommendation for 2008 Honda Ridgeline
  • You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement. You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
    view full answer...

  • Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge Durango
  • We have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models. If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions
    view full answer...

  • Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
  • The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
    view full answer...

  • Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
  • The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121. You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
    view full answer...

  • Front Hitch and Snow Plow Recommendation for a 2003 GMC Envoy
  • As long as you have a front hitch on your 2003 GMC Envoy like the # 31055 the snow plow part # SB324-080 will fit. It's a bit wider than most plows that would get used on a smaller SUV like the Envoy, but if you plan to upgrade to a full size truck eventually this would be a good plow to use. You would be able to easily transfer it over to the Sierra when you needed too.
    view full answer...

  • Recommended Front Mount Hitch for Attaching Snow Plow to 2004 Jeep Grand Cherokee
  • We do indeed offer a front mounted hitch for your 2004 Jeep Grand Cherokee. You'll need the Curt # C31048. Once the front mount receiver is in place, you'll have the mounting point for a snow plow like the SnowBear # SB324-080. If you click the provided link, you can see the installation instructions for the hitch and the plow.
    view full answer...

  • Snowplow and Front Mount Trailer Hitch for a 2015 Ford F-150
  • Yes, I recommend the SnowBear 82 inch snowplow # SB324-080 for your 2015 Ford F-150. You will also need to have a front mount hitch installed, # C31083, to mount and use the plow. I also recommend the off-road lighting kit for this plow, # SB324-127, for better visibility when plowing at night since plows have the tendency to block vehicle lights.
    view full answer...

  • Snow Plow for a 2005 Honda Pilot
  • We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work. The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328. This particular plow is 82" wide and 19" tall.
    view full answer...

  • Snow Plow For 2003 Ford Ranger
  • We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
    view full answer...

  • Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado
  • Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver. The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
    view full answer...

  • Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
  • The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
    view full answer...

  • Replacement Hardware for a Curt Front Hitch Part # 33328 on a 2006 Honda Pilot
  • In order to install your old Curt Front Mount Trailer Hitch Receiver part # 33328 on a 2006 Honda Pilot you will want to use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you arrive at the product page you will need to enter "33328" into the hitch item number box and select "Curt" from the manufacturer dropdown.
    view full answer...

  • Will the Front Hitch # 33328 Fit on a 2005 Honda Pilot LX
  • Yes, the Curt Front Mount Trailer Hitch Receiver, item # 33328, will fit on your 2005 Honda Pilot LX. This hitch is designed for all trim levels of the 2005 Honda Pilot. I have added an instructions link for you to review. There is some minor fascia trimming involved in the installation, but no drilling or other modifications are required. You may also be interested in the Curt Trailer Hitch Electric Winch Mount Plate, item # C31010, if you are installing a winch on your Pilot. To
    view full answer...

  • How Much Does Curt Front Hitch Receiver 33328 for a 2012 Honda Ridgeline Weigh
  • Curt Front Mount Trailer Hitch Receiver # 33328 for your 2012 Honda Ridgeline weighs approximately 23 pounds. I have included a link to the installation details for you.
    view full answer...

  • Front Mounted Receiver for a 2020 Chevy Silverado
  • We do offer some front receiver fits for the AT4 trim package of the 2020 Chevy Silverado, unless it's a 1500 series that has the 2.7L turbo engine or the 3.0L Diesel engine, as the additional plumbing and intercooler won't allow a front hitch to fit. For the 1500 series with no Turbo or Diesel, you'd use the Curt # C31088. For the 2500 or 3500, you'd need the EcoHitch item # EH57FR front receiver which works on all models of the 2500 or 3500, regardless of engine. The Curt # 33328
    view full answer...

  • Front Mounted Hitch For A 2019 Ram ProMaster 2500
  • Though we do not have a custom fit front mount hitch for your 2019 Ram ProMaster 2500, you could install a universal mount hitch like The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2 inch # 41990-07. This hitch will fit heavy-duty and commercial vehicles with frames up to 44 inches. It has a maximum tongue weight up to 1,600 pounds. I would recommend checking your vehicle's manual to find out the proper capacity of your vehicle.
    view full answer...

  • Necessary to Reinstall Fascia on 2006 Honda Ridgeline When Installing Curt # 33328 Front Receiver
  • For the purposes of structural rigidity or safety, there's no problem whatsoever with leaving that bit of fascia off if you wish. The fascia plays a role in how the wind is directed under the vehicle as you're driving down the road, but I doubt you'll notice any significant difference. If you decide you want to reinstall the fascia, the plastic push fasteners are pretty inexpensive, you should be able to find them online pretty easily. I've linked you to our selection of accessories
    view full answer...

  • Recommended Parts Needed For Flat-Towing 2004 Honda Pilot
  • The Curt Front Hitch # 33328 is a front-mount hitch and is designed to be used for installing carriers or winches or other accessories at the front of your 2004 Pilot. It is not designed to be used for flat-towing. You need a few items if you plan on towing your Pilot; a tow bar, if you do not have one, base plates for your Pilot, tow bar wiring, safety cables, and a supplemental brake system. You need base plates like part # DM9517143 to tow your Honda. The base plates bolt to
    view full answer...

  • Can Snowbear Snow Plow for Frame Mounts Install on 2007 Honda Ridgeline
  • We might have a solution for you but it depends on which model winch you have. The only way to install a Snowbear plow on your 2007 Honda Ridgeline is with a front hitch mount. So you'd have to have a hitch installed like the Curt # 33328. It sounds like your plow was designed for mounting to the 2-point frame brackets that SnowBear also uses. What hopefully will work for you then is the # SB324-120 as this converts that style of plow to a hitch mount style. The plow would need to be one
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2010 Honda Ridgeline
  • Installation of the front mount receiver # 33328 is not all that difficult on a 2010 Honda Ridgeline. There is a little bit of fascia trimming required and a couple of the bolts have to be fishwired in but other than that it bolts into place. The trimming is explained in the instructions. 2011 and older models require far less trimming than 2012 and newer models. The fishwire technique is easy enough. I have included some links that should help explain fishwiring for you. Carrying
    view full answer...

  • Front Hitch Recommendation for a 2003/2004 Honda Pilot
  • I apologize for any confusion but you are correct, the Curt Front Hitch part # 33328 that you referenced has been confirmed to fit your 2003 (or 2004) Honda Pilot so it should work well for you. I spoke to my contact at Curt and he assured me it would fit your vehicle.
    view full answer...

  • Recommended Front Hitch and e-Bike Rack for 2013 Honda Ridgeline
  • The correct front mount trailer hitch we offer for a 2013 Honda Ridgeline is the Curt Front Mount Trailer Hitch Receiver part # 33328 which offers bolt-on installation. This will then allow you to attach a variety of accessories such as snow plow, winches, or a bike rack. If you're looking for an e-bike rated bike rack, I recommend the Yakima OnRamp Bike Rack for 2 Electric Bikes part # Y36FR which has ramps for loading and locks for security.
    view full answer...

  • Replacement Hardware Kit for Curt Front Hitch
  • Hey Richard, we do offer a replacement hardware kit for the Curt front hitch part # 33328 that you have with the part # RHK. On the product page you'd need to enter the part number of this hitch and then select the manufacturer as Curt and we'd ship you out what you are needing! The price is available at the product link on this page.
    view full answer...

  • How to Move and Park a Trailer without Using a Vehicle
  • I do have a solution for you but there are no front mount trailer hitches available for the 2003 Honda Element. What I recommend is a Trailer Valet XL trailer dolly such as # TVXL2 which has a 2 inch ball or # TVXL25 which has a 2-5/16 inch ball. These are two-speed dollies that will allow you to accurately move and position the trailer, even by yourself, without having to use a vehicle. Depending on the length of your driveway you would probably want to use low gear. To make it easier
    view full answer...

  • Front Hitch Recommendation for 2005 Honda Pilot
  • For your 2005 Honda Pilot we have the Curt hitch part # 33328 as a confirmed fit. I attached a link to install instructions for this hitch for you to check out as well. I also uploaded a picture I took from the install instructions that shows the install steps and the trimming required.
    view full answer...

  • Weight of Curt C31074 Front Mounted Receiver for 2020 Chevy Colorado
  • The Curt # C31074 front mount receiver has shipping weight of 36 lbs, minus the packaging the hitch weighs about 30 lbs. I've linked the installation instructions for you. The Curt # 33328 front mount receiver you'd looked at is a fit for a 2003 - 2008 Honda Pilot or a 2006 - 2014 Honda Ridgeline, and wouldn't fit your Colorado.
    view full answer...

  • Westin Bull Bars Should Not Conflict with Front Mount Hitches
  • The Westin Bull Bars should not conflict with the front mount hitches at all. The receiver opening on the Curt Front Mount Trailer Hitch Receiver, part # 33328, will sit behind a small opening in the front fascia already present on your vehicle. The hole is too small right now, so you will have to enlarge the hole a bit. If you would like to view the installation instructions for the hitch, please click on the Instructions link. There is a link on the page with the hitch to the installation
    view full answer...

  • Diameter of Mounting Holes on Curt Front Mounted Hitch # 33328
  • The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 33328 has the front 4 holes that are 21/32nds inch and the 2 rear holes are 9/16 inches. These are the measurements from the manufacturer.
    view full answer...

  • What Modifications Need to Made on 2012 Honda Ridgeline to Install a Curt Front Mount Trailer Hitch
  • To install the Curt front mount hitch # 33328 on a 2012 Honda Ridgeline, trimming of front air dam or fascia may be required. The instructions that I have linked for you shows what needs to be trimmed. I have also included a picture that shows what needs to be trimmed.
    view full answer...

  • Trailer Hitch Fits for 2016 Mercedes-Benz Sprinter 2500
  • At this time we show no front-mount hitch fits for the 2016 Mercedes-Benz Sprinter 2500. I also checked on 2014, 2015 and 2017 model years and for those too we show no front hitches. We DO have confirmed rear-mount hitch fits for both long and short wheelbase versions. All appear on the page I linked for you. Just select your configuration from the drop-down menu tool to then see suitable options for that specific version.
    view full answer...

  • Can Curt Trailer Hitch Receiver 33328 Be Used To Move 30' Travel Trailer With 700lb + Tongue Weight?
  • You are correct that since the Curt Front Mount Trailer Hitch Receiver # 33328 on your Honda Pilot has a 350lb vertical load rating, you will not be able to use it to maneuver your 30' travel trailer that has 700-800lbs tongue weight. If people are using this hitch to move a trailer this heavy, they are most definitely overloading the hitch by a considerable amount. To maneuver your travel trailer around I recommend using the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16"
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Honda Ridgeline Accessories