bing tracking image

Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: K2AVAL8422,C31008

Retail:$2,475.94
Our Price: $2,126.18
You Save: $349.76
Snow Plow

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me



Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
part number: K2AVAL8422

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.

Features:

  • Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Electric winch raises and lowers plow with sturdy, nylon strap
    • 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
    • In-cab switch serves as a reliable backup to the remote control
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
  • Strong rubber deflector on top of plow directs snow down and away from your windshield
  • Hardened steel edge breaks up packed snow and ice
  • Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
  • Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
    • Can extend life of the plow if you hit an obstruction
  • Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
    • Wheel height is adjustable to match your vehicle height
  • Plow handle with knob lets you easily move plow up and down during mounting
  • Safety chain holds plow in raised position during travel
  • Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
  • ISO certified
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver


Specs:

  • Application: 2" x 2" hitch receivers
    • Cannot be used with hitches or receiver adapters that have built-in drops
  • Blade dimensions: 84" wide x 22" tall
  • 3 Blade angles:
    • Left 45 degrees
    • Straight ahead
    • Right 45 degrees
  • Distance from center of hitch pin hole to the front edge of plow: 50"
  • Winch lift capacity: 3,000 lbs
  • Weight: 283 lbs
  • 1-Year limited warranty


Detail K2 Plow Length

The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.


Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


Detail K2 Hitch Mount

To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


Detail K2 Caster Wheel

The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.


How to Plow

Detail K2 Adjustable Plow Position

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.


Detail K2 Wireless Remote 2.4Ghz

The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

Detail K2 Electric Winch

The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.


Detail K2 Features

Detail K2 Skid Shoes

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.


Detail K2 Blade Stiffener

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.


Detail K2 Trip Springs

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.



AVAL8422 Detail K2 Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31008

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in the USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31008 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall - K2AVAL8422

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31008

Average Customer Rating:  4.8 out of 5 stars   (56 Customer Reviews)

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Glen 12/10/2021
2003 Chevrolet Silverado 1500

Decent plow for the price.

I installed
this DK2 Avalanche on a 2003 GMC Yukon 1500 with a Curt front receiver hitch 31302. If you have a side mount battery, you may need battery bolt extenders (Battery Doctor #30400) to make life easier. That said, the ring terminal connectors on the winch control box will be too small. Get ones that will fit the 3/8 inch stud and 12-10 AWG wire to replace the stock ones.

Manufacturer instructions are not very helpful, but Graz's Garage has a great install video on YouTube. He installed his on a 2020 Chevy Colorado Z71. You can always count on a gearhead from Detroit. eTrailer is awesome at responding to concerns, too, and I'm glad I bought this product from them.



by: Steve Miller01/13/2021

My plow was delivered quickly. It took a bit longer to assemble than I thought it would, but it seems pretty heavy duty and looks and works great for my 600' long driveway. It's much better and quicker than plowing with my 4 wheeler and warmer too.



by: Terri12/21/2023

It's a great plow.works good the winch is a little slow and the remote is slow to respond but all in all it does what I need it to do.



by: Jesus 11/15/2023

Works good with my snow plows.



by: George 10/10/2023

I just had a chance to finally get it mounted to my truck. The fit is perfect. I have never had any issues with anything that I’ve ever gotten from etrailer.



by: Will 11/12/2022

Plow seems to be of good quality, wont know till I actually use it, how good it is. Seems sturdy enough to do the job, assembly was very straight forward.
My only complaint is etrailer left me dangling for a month with no updates on my order status, even after chatting with one of their customer service people.
I ended up contacting DK2 to get a ship date.



by: Stephen06/15/2020

This is the second front hitch I have purchased from etrailer. As with the first, this was a well built, solid product. It fit my older 2009 Ford Super Duty perfectly. The only thing that was incorrect was in the instructions it called out the tools needed. But the actual sockets needed were larger than called for. Not a big deal, but something to correct moving forward. I mounted the hitch myself in about 45 minutes. Most of that time was getting set up and going looking for the larger sockets. I used a roll around jack, as I did with the first hitch, to lift it into place and be able to move it around. Works well. Everything was A+. Sorry I have no pictures. But it looks great.

Stephen

6/16/2021

Works great. Used many times with moving trailers and a stump grinder. Much easier to line up when pushing the item in front. Also mounted carrier to mount garden sprayer and drove the fence line inside my AC truck instead of on an ATV or lawn tractor.



by: Jose 09/25/2023

Solid build, perfect fit, nice function ality.



by: Cruising For Jesus12/07/2020

Bolted right on our F450SD with out having to remove anything.

Cruising J.

12/8/2021

Great



by: DaveH01/22/2015

This is the second "Curt" front hitch that I have purchased. I have not had the opportunity to mount it yet, but the instructions appear to be complete and easy to follow. It arrived UPS ground in about 5 days.

Daveh

1/22/2016

Installation was easy, even for 70yr old bod! Works great, bought it to mount a winch, have also used it to move trailers around the yard.



by: Wally 08/10/2022
2018 Subaru Forester

This is the 3rd hitch I have ordered from etrailer.com. First one was for my second daughter's new 2022 Honda, 2nd one was for my 2018 Subaru Forester and this one is for for my 3rd daughter's Ford F-350 Super Duty. etrailer.com has what I need, fast and easy to order, delivered to my front door and it fits every time. -Wally-



by: Rick 03/02/2023
2009FordF-250 Super Duty

Heavy Duty and well made. Fairly difficult install because of such tight clearances on the trucks frame members, but I installed it myself in about an hour.



by: Bob 09/21/2023
2008 Ford F-350 Super Duty

Fast delivery. Fits perfect. Great comp any.



by: Fred Benjamin06/18/2013
2008 Ford F-250 and F-350 Super Duty

The Curt receiver hitch is good quality but if your doing the install yourself from the driveway or garage floor, two floor jacks would be very helpful as the receiver hitch needs to be "snaked" in around the truck structure. The front receiver hitch will give us options for carrying various types of hitch attachments. Thanks e-trailer.



by: Thomas 11/02/2019
1995 Ford F-250 and F-350

Haven't had to use it yet but arrived when expected and easy to assemble and looks very easy to use. Would definitely recommend buying from etrailer.com



by: Conor F11/10/2019

Ended up using this front receiver way more than I initially expected. Now it’s possible to one person back up my boat into garage...safely. Very easy to install and seems to be high quality. No complaints.

Flanagan

11/11/2020

Still working great. Not sure if it is in the description, but this hitch fits chassis cabs trucks, e.g. my truck is a F450 Chassis Cab.



by: Douglas01/17/2023

Fit just right, it would be nice if there was a wider version that allowed me to keep my front axle protectors on. Doesn't stick out ridiculously far, leaving just enough room in front of the air damper for the pin hole.



by: Lee J03/06/2011
FordF-250 Super Duty

On my F-250 4x4 the installation went smoother than expected, working on my back with the truck sitting on the floor. The front end of the frame rails is up inside the bumper assembly, so it's rather tight space to work in, but the entire job took only about an hour. I did NOT have to trim the air dam.

The carrier slid right into place using a floor jack, and it was easy to align the front bolts. Once they were in place the floor jack could be removed. Fishing the rear bolts is a little tricky, but it went surprisingly well once I straightened-out the coiled fish-wire (leaving the bend about 2" from the end, which pops through the hole once it reaches it). To prevent losing the bolts inside the frame I pulled just a portion of the bolt-coils off the bolts' threads and got the nuts started before pulling-off the rest. This results in stretching-out and ruining the bolt-coils on the fish-wires. Curt anticipated this, however, and provided one for each side. That kind of thoughtfulness (and the slight extra cost of providing the second fish-wire) is what distinguishes excellence from merely good-enough.



by: John 10/30/2019
2010 FordF-250 Super Duty

the Curt front receiver for the 2010 F-250 is an exact fit- and it arrived in good time. I got the Curt rear receiver from etrailer a couple of years ago and it has worked well.
Now I can carry on both front and back. The video provided was a great help.



by: Jay 07/09/2020
2008 Ford F-350 Super Duty

Perfect fit on our 2008 f350. Installation took less than an hour with two people. As usual good shopping experience with etrailer.

Jay

7/10/2021

After a year the hitch has been very useful in unanticipated ways. Attaching a cargo rack nc we have a kayak rack attached to rear hitch. Hitch still looks new and no rust after first winter. Recommend product and etrailer.com.



by: Darin F09/06/2018
2008 Ford F-350 Super Duty

Good hitch for the price, I use it for a front cargo carrier for surf fishing, but I'm confident I could pull stuff with it. This fits my 2008 F350. Install wasn't too bad but this thing is heavy, easier with two people.



by: Terry 01/27/2022

fairly easy to install but 2 people suggested
very
sturdy
If you install a load basket in the receiver, be sure to attach something that helps you remember its there so you dont bump the car in front of you. I used a fiberglass rod I could see from the cab



by: Vince C.07/13/2014

I was very impressed about the quality and fitment of this product. The price was excellent, the shipping time was excellent, and the condition of the product received was also excellent. Of course it said it would take 20 minutes to install, but the reality was more like an hour taking my time and not wanting to damage anything. But still, under an hour was good. Everything went as planned out in the instructions. Overall, I am very please with the product and how it looks on my truck. Keep up the great products you sell!



by: Paul02/20/2019
2000 Ford Ranger

Shipped in a short amount of time, call company and received help and a phone call back as promised, great job.



by: Mark04/09/2018
2008 Ford F-250 and F-350 Super Duty

Installing this is a two person job, a little difficult by yourself. Other then that it is made of good quality and heavy duty.


25
56
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Light Kit for K2 Detail Snow Plow
  • K2 recommends that their # K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their # K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware. I've linked to a product demonstration video featuring the light kit.
    view full answer...

  • What is the Receiver Height Requirement for a Detail K2 Snow Plow
  • I spoke with my contact at Detail K2 who said that the height of the front hitch receiver on your 2005 Jeep Wrangler needs to be within the range of 13" - 18" which is measured to the bottom of the receiver opening. This is the case for all of their plows, including the Avalanche # K2AVAL8422 that you referenced.
    view full answer...

  • Snow Plow and Mount Recommendation for 1994 Jeep Wrangler 4WD
  • I'd recommend going with a plow mount for your vehicle over a hitch style mount. On some hitch mount setups we've seen the hitch not be as durable as the mounts that mount to the frame and are specifically for plows so that's what I feel is the better solution. The Detail K2 Storm Plow part # K2AVAL8422 that you referenced is a great choice, and then for mounts custom fit to your 1994 Jeep Wrangler we have the part # K284115 which would work great.
    view full answer...

  • How Tight Should Blade Stiffeners Be on Detail K2 Snowplow for 2" Hitches
  • I spoke to Detail K2 about the blade stiffeners on the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 and they informed me that they don't need to have a lot of pressure applied, they should simply be snugged up and then turned an additional rotation or so for support.
    view full answer...

  • Differences Between Detail K2 and Detail K2 Elite Snow Plows For a 2003 Toyota Tacoma
  • Yes, the difference between the Detail K2 Snowplow # K2AVAL8422 and Detail K2 Elite Snowplow # K2AVAL8422ELT is the Elite has the electric actuator over the winch. The Elite also uses a chain connection to the blade while the basic K2 has a strap that is more likely to become damaged. The electric actuator is superior to the winch. It operates faster, smoother and it has a built in clutch that will protect against damage that a winch would cause. The actuator won't be able to lift the blade
    view full answer...

  • Correct Front Mounted Receiver for 2005 Chevy Silverado
  • The # K2AVAL8422 K2 plow attaches to the vehicle using a standard front mounted hitch. The hitch you need will depend on whether your Silverado is a 1500 or a 1500 HD model. The easy way to differentiate between the two is the hubs. The 1500 has 6 bolt hubs while the 1500HD has 8 bolt hubs. If you have the 1500 model, I'd recommend the Curt # 31302. If you have the 1500HD model, use the Curt # 31108. I've linked to installation videos for both hitches mentioned above.
    view full answer...

  • Detail K2 Snowplow for 2" Hitches K2AVAL8422. Will This Work On A Lifted Truck?
  • In order to use the Detail K2 Snowplow # K2AVAL8422, your front hitch must be between 13"-18" from the ground, when measured from the bottom of the receiver opening to the ground. We installed the Curt front hitch # C31018 on a 2012 F250 where everything was stock, and the front hitch was at about 15-1/2". So with a 6" lift and big tires, this snow plow would likely not be effective. You can always measure your hitch to be sure, but your lifted truck will likely not be able to be used
    view full answer...

  • How to Add Lights to a Detail K2 Snowplow for 2" Hitches
  • In order to add lights to the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 you'll need a light kit like the Halogen High/Low Beam Light Kit with Turn Signals for Detail K2 Snowplows part # K281488LB2. The light kit comes with lights, brackets, and pigtails. The pigtails will be tied into the factory headlights but you'll indeed need to add relays so you don't overdraw the factory headlight circuits. Unfortunately, we don't have a plug-in relay harness for this so you'll need
    view full answer...

  • Will Detail K2 Snowplow for 2 Hitches Fit Lifted Truck
  • All of the snowplows from Detail K2, including the part #K2AVAL8422 you are looking at, require that the height of the front hitch mount receiver be 13" - 18" from the ground to the bottom of the receiver opening. As long as the front hitch on your K1500 meets that criteria you're good to go!
    view full answer...

  • Does Blade Stiffener Have to be Connected for Safe Usage of Detail K2 Hitch Mount Snowplow
  • Good question! The blade stiffeners that come with the Detail K2 Snowplow # K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you will be pushing a lot of heavy snow. Otherwise you'll be just fine using it on your 2003 GMC Yukon XL without those connected. The reason why you're having trouble is because those will connect if the receiver is the same height as the crosstube,
    view full answer...

  • Can I Use the DK2 Snow Plow # K2AVAL8422 with a 9-Inch Ground Clearance on My 2016 Toyota Tacoma?
  • I reached out to my contact at DK2, and he confirmed that you will have enough room to install and operate the Detail K2 Snowplow for 2" Hitches # K2AVAL8422 on your 2016 Toyota Tacoma with a 9-inch ground clearance. As far as the assembly, the snow plow does require assembly upon arrival.
    view full answer...

  • Can K2 Detail Avalanche K2AVAL8422 Be Swapped Between 2002 Toyota Tundra and Ford F-350
  • The # K2AVAL8422 plow itself isn't vehicle specific, you can install it on any SUV or light truck that has a front hitch available for it. To install the # K2AVAL8422 on your 2002 Toyota Tundra, you'll need a front mount hitch like # 31180. You will be able to used the plow on both trucks, but unless you want to move all the wiring each time, you'll need an additional winch control box # K2WCB and wireless remote # EWX004-CAD for the second vehicle. If you'd care to reply with the
    view full answer...

  • Comparing the Detail K2 Avalanche and Detail K2 Rampage II Snowplows for a Dodge Dakota
  • For a 2000-2004 Dodge Dakota 4x4, I recommend the Detail K2 Avalanche Snowplow part # K2AVAL8422 with the Curt Front Mount Trailer Hitch Receiver part # 31080 over the Detail K2 Rampage II Snowplow with the Custom Mounting Brackets for Detail K2 Snowplows part # K284134 for two reasons. The first reason is that the Detail K2 Avalanche has a has a much higher winch capacity of 3,000 lbs than the Detail K2 Rampage II which is only rated at 1,500 lbs. The higher rated the winch, the longer
    view full answer...

  • Recommended Snowplow and Front-Mounted Hitch for 1994 Ford Ranger
  • For your 1994 Ford Ranger I recommend the Detail K2 Avalanche Snowplow # K2AVAL8422 which fits in the Curt Front-Mounted Hitch # C31063 (please keep in mind this hitch will not fit Ranger's with a front cross-member or 2WD models built in Canada). The K2 Avalanche # K2AVAL8422 has a blade which can adjust to be angled to the left or right as well as straight ahead and gets raised or lowered with an electric winch that is operated via remote control so you do not have to leave the cab
    view full answer...

  • 2013 Ford Expedition Correct Curt Front Mount Hitch Receiver
  • The Curt Front Mount Hitch Receiver # C31008 fits 2008 - 2010 Ford Super Duty pickups and some 2009 - 2011 motorhomes while the Curt Front Mount Hitch Receiver # C31068 fits a 2009 - 2014 Ford F-150, a 2009 - present Ford Expedition, and a 2009 - present Lincoln Navigator. Since you were looking at front hitches for a 2013 Ford Expedition you want the Front Hitch # C31068.
    view full answer...

  • Installation Of Curt Front Hitch, # C31008 On A 2008 Ford F250/F350 Super Duty
  • The installation of the Curt Front Hitch, # C31008, is an easy bolt-on installation and requires no drilling. The hitch will just bolt to the frame rails on the truck. On some vehicles it may require some minor trimming to the fascia. I am sending you a video link to the installation of a Draw-Tite Front Mount Trailer Hitch Receiver by Draw-Tite, # 65049, which is the same install as the Curt Front Mount Trailer Hitch Receiver, # C31008, that you are asking about. It shows the minor
    view full answer...

  • Distance from the Ground to the Bottom of the Receiver on Curt Front Mount Trailer Hitch # C31008
  • I spoke with my contact at Curt regarding the Front Mount Trailer Hitch, # C31008, and what you can do is measure from the bottom of the bumper to the ground and then subtract 8-3/8 inches from that to get the measurement that you need. I have also included a link to the installation details below.
    view full answer...

  • Availability of Front-Mount Hitch for 2008 Ford F-350 Cab and Chassis
  • We offer two front-mount hitches for your 2008 Ford F-350 Cab and Chassis that can be seen using the link provided. Both the Curt # C31008 and the Draw-Tite # 65049 feature the same 500-lb vertical load and 9000-lb pull capacities and both install without drilling or welding using included hardware. Both will require some trimming of the vehicle's front fascia. I have linked you to the written instructions for both hitches as well as to a video showing the Draw-Tite being installed on
    view full answer...

  • How Much Fascia Trimming With Installation of Curt Front Hitch # C31008 On 2010 Ford F250 Super Duty
  • I am including a link to a video of the installation of a Draw-Tite Front Mount Trailer Hitch Receiver by Draw-Tite # 65049, on a 2009 Ford F-250. This is the same install as the Curt Front Mount Trailer Hitch Receiver, # C31008, that you are asking about. It shows the minor fascia trim being done, but the black piece of fascia that is trimmed is not apparently on every vehicle. It just depends on what trim package your vehicle came with from the factory. I am including a link to
    view full answer...

  • Will the Curt Front Hitch C31008 Fit on a 2019 Ford F-350
  • I have a solution for you, but the Curt # C31008 is only designed to fit on 2008-2010 Ford Super Duty trucks. For a 2019 Ford F-350 you'll need the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31078, which is the confirmed custom fit front hitch for this vehicle. Installation of a front hitch on the 2019 F-350 may require trimming of front air dam and/or fascia for installation, but this is the case for all of the front hitches available for this model. I've added a photo
    view full answer...

  • Curt C31008 Torque Specs for Installation
  • If you check out the installation instructions I attached you will see the torque specs that are recommended for installation of the Curt hitch part # C31008 that you referenced. For liability reasons we don't post them on our site since they are subject to change. The instructions link directly to the manufacturer so if there is a change the instructions will always be accurate.
    view full answer...

  • Front Mounted Trailer Hitch Receiver Compatibility on 2008 Ford F-450 with Boss Snow Plow Mounts
  • A front mounted trailer hitch receiver like # C31008 will not fit on your 2008 Ford F-450 at the same time as your Boss Snow Plow Mount. The mounts will interfere with each other, so you will need to swap them when desired as they will not work together. I've attached a photo and video of the mount locations to further assist. You may want to consider the SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall # SB324-172 which would keep you from changing
    view full answer...

Info for these parts were:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Andrew S
Test Fit:
Andrew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Ford F-250 Super Duty Accessories