Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
Part Numbers: 58-8,3050-S
Retail:$250.27
Our Price: $179.11
You Save: $71.16
This item qualifies for Free Shipping
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
part number: 58-8
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.
Features:
- Brake controller activates your trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Large digital LED display shows your controller settings and monitors voltage output
- Simple, intuitive controls keep your settings in easy reach
- Adjustable gain setting determines the amount of braking output sent to the trailer's brakes
- Built-in, slide-bar manual override activates trailer brakes to control sway in emergency situations
- Deceleration sensor lever lets you adjust initial braking power and aggressiveness for smooth, safe braking
- Built-in safeguards protect your vehicle and trailer
- Current limiter protects vehicle from shorts in the trailer wiring
- Hazard flasher immunity prevents pulsing of the brakes when flashers are activated
- Quick and easy mounting with included bracket and hardware
- 90 To -35 degree mounting range - must be horizontally level
- Pigtail harness hardwires into your vehicle
- Made in the USA
Specs:
- Application: trailers with up to 2 axles (4 brake assemblies)
- Compatible with electric brakes only
- Dimensions: 6-1/2" long x 3" wide x 1-5/8" tall
- Mounting angle: -35 degrees to 90 degrees vertically
- 7-Year limited warranty
Proportional Braking
The Dexter Predator DX2 brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Predator DX2 uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
Large Digital LED Display
The Dexter Predator DX2 features a large LED display that's easy to see so you can check on your current braking output setting with a glance. This display is designed to keep it simple and not overload you with information. The display will also show you the voltage to confirm that the trailer brakes are receiving power.
Braking Output
During the initial setup process, use the thumbwheel on the front of the brake controller to adjust the braking output. The output control lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the output is only readjusted when you experience changing road conditions or if the weight of your trailer changes. The power output control on this brake controller lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the power output is only readjusted if you switch from a heavy, loaded trailer to a much lighter, empty trailer - or vice versa.
During the initial setup process, you can use the thumbwheel to adjust the power output. To get more power to your brakes, increase the power level. To decrease the power output, lower the power level.
Sensitivity Adjustment with Deceleration Sensor Lever
Once you have the overall power set, you can fine-tune the power output by adjusting the sensitivity of the internal sensor. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does. Boost gets the braking power to your trailer brakes faster and with more intensity so that it doesn't push your tow vehicle forward. To increase the sensitivity for towing heavier loads, move the lever away from you. For a lighter load, move the lever toward you.
Slide-Bar Manual Override
The Dexter Predator DX2 comes with a built-in manual override slide-bar in easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push the slide-bar to the left. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
You can also engage the manual override to help you move a sliding 5th-wheel hitch closer to your truck's tailgate for tight maneuvering during slow speed turns. Just apply the manual override to hold the trailer in place while slowly moving the tow vehicle forward.
Quick, Simple Installation
Because the controller operates with an internal inertia sensor, it must be mounted between -35 degrees and 90 degrees vertically. The Predator DX2 also needs to be horizontally level and parallel with the direction of travel to function properly. During initial installation, the deceleration sensor lever must be positioned straight up and down. After mounting the Predator DX2 using the included bracket, hardwire the controller directly into your vehicle.
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle
Note: One of the following will be required to ensure proper installation:
- 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
- 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
058-008-00 Dexter Predator DX2 Electric Brake Controller with Inertia Sensor - 1 to 2 Axles - Proportional
Replaces 58-8
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan
part number: 3050-S
Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Pigtail wiring adapter eases installation of your electric brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Wire end connects to the wires on your brake controller with the included butt connectors
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.
To install your electric brake controller you need to connect the four wires - ground, power, brake switch and brake power - of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If you do not have a harness, or you need a new one, the Tekonsha wiring adapter will serve the same purpose.
3050-S Tekonsha Brake Control Wiring Adapter
Replaces 20266
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Defective
- Too difficult to install
Customer Reviews
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional - 58-8
Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan - 3050-S
Average Customer Rating: 4.9 out of 5 stars (67 Customer Reviews)
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features. Ease installation of your electric brake controller by using this custom wiring adapter. Simply connect the 4 wires of the harness to your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Rick12/29/2019
Could not have worked better! Perfect fit, good heavy gauge wiring with thick insulation. Wires within a "cage" conduit. Plenty of length to allow attaching trailer brake controller anywhere it needs to go. Very pleased with this purchase! In the photo, you can see just a bit of the 3050-s (upper left corner) where it connects to the rest of my "system".
by: Rancher01/07/2023
Finally a brake controller that does what I set it to, not what it’s little computer brain, designed by someone who has never pulled a trailer thinks it needs to do.
by: Michael 09/22/2022
I installed this controller in my 1982 Chevy K20 pickup.
It works perfectly! Etrailer exceeded my expectations with their level of customer service from the time the order was placed to the products arrival at my home. Truly 5-star service!
The video tutorials are straight forward and very helpful.
The universal installation kit literally had everything needed to complete the job.
Side note:
I would have liked to see the (2) 10ga wires in the insulation to be black and blue, not black and white, no biggie, black on black and white on blue.
Thanks again!
by: Richard12/28/2022
was difficult to find a good mounting location away from leg room
by: Bob J.09/07/2016
I am very satisfied with the Dexter Axle Predator Electric Brake controller. I purchased the Dexter brake controller to be compatible with Dexter car trailer axles on a 16 foot car hauler. The braking unit is very useful when towing in very steep and winding mountain terrain. I feel that the braking is a necessary safety item when towing in a hilly or mountainous environment and the Dexter Predator brake controller provides the great control and driver peace of mind knowing that a heavy load can be managed. The unit installs very easily with the proper adapter.
by: Aaron 02/06/2024
Delivered on time and the right parts
by: roula m07/25/2017
The parts I ordered were shipped and now are installed on a enclosed trailer that carries a variety of motorcycles. The roads are mountainous and treacherous here so I have to be able to 100% depend on my trailer brakes. The brakes have been flawless, giving me total confidence. Perfect parts, great price. Customer service was a 10. Thanks for all your help !
by: Fred09/09/2017
My brake controller was a great match for my needs. I have a 4 brake trailer which gets the proper control from my Dexter unit. From empty weight to heavy load the adjustment is just a slight roll of the knob. I like the digital read out so I can glance down to check system operations. It does great f or me and fit right in to the factory wire set up in my truck
by: Brian06/18/2020
I recently bought the Redarc Tow-pro Elite Break controller and the harness adapter to match my 2018 Armada Platinum. I also choose expedited shipping since I had our first camping trip booked only a few days away! It showed up on schedule early in the day, installation took less then an hour from initially opening the box to completion. The harness adapter made installation incredibly easy, and the redarc control knob looks good mounted (which I was previously worried about installing in my dashboard). I’ve logged several trips already, set up was easy as well as fine tuning the brake intensity. Great product!
by: Nick T04/19/2016
2004 InfinitiQX56
I already had a Tekonsha Voyager Trailer Brake controller which had pigtails. Added this wire harness and four (4) butt splices and I just plugged it into my 2004 Infiniti QX56. Great.
by: Timothy 11/05/2019
2014 Nissan Titan
I recently purchased a 16X6.4 tandem axil trailer and needed to install a good brake controller in my 2014 Nissan Titan for it. I found etrailers web sight and after looking around for a bit found the exact controller I wanted. Their web sight made it a lot easier then I thought and they had everything I needed including the correct harness. I even called just to make sure and the person I spoke to on the phone not only assured me I had the right items but also took my order. The whole process took less then 10 minutes. I received the controller and harness in just a couple days and everything was correct. Installed it in the truck and Walla!! I have brakes on my trailer and they work great. If there is ever anything else I need for this trailer in the future I will be paying these guys a visit.
Thanks
by: Eric 06/29/2020
Worked great. Probed the wires just in case, but the wire colors on the adapter matched the colors on the brake controller. The yellow crimps were a little larger than needed. Had to REALLY crimp them down to hold the larger gauge wires on the adapter.
by: Mark06/18/2020
Item was shipped promptly and was easy to install works great on my 20,000 pound felling goosneck trailer with 4 electric over hydraulic disc brakes.
by: Jerimiah Lemieux07/09/2014
Extremely good quality parts and harnesses. I needed them by a specific day and it was very important that I got these for a camping trip we had planned for months, they were at my door exactly when promised. The sales staff on the phone were especially courteous and patient, also eager to answer my questions and double checked MY order for correct fitment to ensure a perfect experience. I never do these online reviews but I was impressed enough to sit down and do this. Can't wait till I need trailer parts again, I'll shop here without a second thought.
by: Gary M.06/01/2015
Just finish installing the brake controller so I have not seen it in operation. Everything that was needed for installation was contained in the package. Due to limited access due to the chosen mounting location getting two of the side screws started took some effort.
by: Dad07/22/2021
Plug n play on my 2018 Nissan frontier with a redarc tow pro elite.
by: John B11/29/2016
2011 Nissan Titan
The wiring harness I ordered from Etrailer came in a timely manner and it plugged directly into my Nissan Titan. I am very pleased and it has met all my expectations!
by: Terry03/06/2017
This is a great product, installation was easy, instructions accurate and product works as advertised. I would do this all over again if needed.
by: Anthony12/29/2018
A great product. Had it installed by my Benz dealership. No adjustments needed.....factory settings were all I needed to tow my boat and trailer.
by: Dennis 06/06/2023
Everything as described.
by: Joseph 06/19/2020
Couldn't have asked for a more simpler, affordable way to get a brake controller. The OEM ones are way over priced. This connected in perfectly with no hard wiring necessary. If I can install it anyone can.
by: WalkerEOD11/03/2017
Easy to install and adjust, seems to work well with my Pathfinder. The butt connectors that were included were not the correct size but i wouldn't have used them anyway.
by: Randy11/03/2017
Nissan Pathfinder
Wire loom didn't go the full length of the wires. Butt connectors are not the correct size. Fit my Pathfinder without issues.
by: Joshua 11/19/2019
Product arrived as described and greatly helped the installation of my brake controller.
by: Chuck 08/03/2022
Products came quickly... what I was looking for.
25
67
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Wiring a Brake Controller on 2010 Chevy Silverado
- You are correct, the tow package wiring in your Silverado does not match up color for color with the controller.
The red/black tow package wire will connect to the black wire on the controller. The dark blue tow package wire connects to the blue wire on the controller, the light blue tow package wire connects to the red controller wire, and the white tow package wire connects to the white wire on the controller. The orange tow package wire is for an illumination circuit and is NOT needed.
view full answer... - Troubleshooting Low Power Output for Predator DX2 Brake Controller
- It sounds like you've done a good amount of troubleshooting already which gives us a good foundation to work off of.
Since your Dexter Predator DX2 Trailer Brake Controller # 58-8 isn't supplying more than 3.2 for power this tells me that 1 of 2 things is going on; either there isn't enough power getting to the controller and is limiting it, or something is internally wrong with the controller.
Start off by checking the wires connected to the controller first. The white should have
view full answer... - Brake Controller for 1999 Chevy Tahoe Towing a 2006 Fleetwood Bayside Camper with Electric Brakes
- Since brake controllers are not vehicle-specific, you can use any of our brake controllers with your 1999 Chevy Tahoe and camper. The Dexter Axle Predator Electric Brake Controller, part # 58-8, is a great choice. It is inertia-activated, meaning you have a lot of mounting options for inside your Tahoe, has an LED display showing voltage output, and works with 1 or 2 axles.
If you don't already have a 4-way connector on the back of your vehicle, you will need the custom-fit Vehicle Wiring
view full answer... - Dexter Predator Brake Controller 58-8 Installation in 2005 Ford F150
- If your 2005 Ford F-150 has only 4 wires at the bumper (or only a 4-pole connector) and you need to install a 7-way vehicle-side connector, you could use the Hopkins # 37185. If you already have the 7-way connector on your truck, you will need to make the additional wire connections for the brake controller. (The 4 wires you have carry the brake light, running light and turn light signals for your trailer, plus a ground: white = ground, brown = running/brake lights, green = right turn signal
view full answer... - Trailer Brake Controller for a 2008 Saab 9-7X with Factory 7-Way Trailer Connector
- The 24 pin receptacle you are seeing sounds like the OBD2 port and would not be used for a brake controller. You will need to utilize the owners manual or a Saab technician to locate the wires and to determine the functions of those wires. Identifying the wire functions is critical because a brake controller has to be hardwired in since there is no plug and play option available.
The wires on a brake controller are as follows:
white is ground
black is 12 volt power in
blue is output
view full answer... - Parts Needed To Tow a Towmaster Trailer with Electric Brakes with a Winnebago
- The Dexter Predator brake controller # 58-8 would be a good fit to power the trailer brakes on your Towmaster trailer. You would need to hard wire the brake controller to the Winnebago, connecting the wires coming from the back side of the brake controller as follows.
The brake controller wire functions are:
White: Ground, attached to a clean piece of unpainted metal.
Black: 12v lead, attached to the positive battery terminal on the Winnebago with a 40amp circuit breaker.
Blue:
view full answer... - Installing a Brake Controller on a 2016 Chrysler Town and Country Van
- The 2016 Chrysler Town and Country did not come with a factory installed tow package and a 7-way trailer connector. You will have to hardwire in a 7-way and the all the wiring so you can install your controller. None of the wiring is pre-installed on this model vehicle.
The first thing you will need to do is wire in a 4-way flat trailer plug if you have not already done so. You will need a wiring harness, I recommend the Curt T-One harness, # C56331. This harness is custom-fit to your
view full answer... - Parts Needed to Install Dexter Predator DX2 in 1998 Dodge Ram 1500 with 7-Way
- All you need to install the Dexter Predator DX2 brake controller part # 58-8 in your 1998 Dodge Ram 1500 with the factory 7-way is the install harness part # 3020-S which plugs right into the port under your dash and then wires color for color to the # 3020-S. No additional breakers needed.
view full answer... - Installing Trailer Brake Controller on 2012 Chevy Silverado with Factory 7-Way
- If your 2012 Chevy Silverado is equipped with the factory 7-Way connector at the rear there isn't an actual OEM port behind the dash for a brake controller plug-and-play install, however all the needed wiring is present.
This means you can simply hardwire the Dexter Predator DX2 Brake Controller # 58-8 directly to the factory wire bundle behind the dash of your truck. Based on my research these blunt cut wires are behind the steering column. You will make the following connections using
view full answer... - Can the Dexter # 58-8 Predator DX2 Brake Controller Be Installed Vertically
- According to Dexter, the # 58-8 Predator DX2 needs to be mounted in the direction of travel, level on a side to side plane. If mounted on vertical plane as you mention, the brake controller would not function.
If the vehicle design somehow limits the installation options, and you have no other option than to mount a brake controller vertically, you can use a time delayed brake controller like the # 5504 Draw-Tite Activator IV. Because the controller is solid state, if can be mounted
view full answer... - Brake Controller for Towing a Trailmaster Trailer with a Harley Electra Glide Classic Motorcycle
- I have spoken with small tent trailer manufacturers about which brake controllers are best for their trailers with brakes and found that they recommend using a a time delayed brake controller for their trailers. They said that many of their customers have excellent performance from the Activator electric trailer brake controller by Draw-Tite, # 5504.
The advantage of a time delayed brake controller on a motorcycle is that it can be positioned in any way, so you can easily find a mounting
view full answer... - Install Video for Brake Controller in 2006 Ford F-150
- I found the video you are looking for and attached a link to it on this page. You'll want to look for the heading titled "FEATURED HELP INFORMATION" and under that "Miscellanious Media" and you'll see a link.
It depends on what device you are using to view this page but most likely it's underneath the product links so you should scroll down.
view full answer... - Troubleshooting 12V Power & Brake Output Circuits on 7-Way on 2008 Saab 9-7X
- It sounds like you have a 7-way trailer socket on your 2008 Saab 9-7X that has no signals on the 12V charging circuit nor on the brake controller output circuit. If you refer to the linked photo you'll see the usual pin/function assignments typically found on an RV-style 7-way. Often the 12V trailer power circuit is carried on the pin at the 1-o-clock position and the brake controller output is carried on the pin at the 5-o-clock position.
The most common causes for an issue like this
view full answer... - Brake Wire for Installation of Dexter Predator Trailer Brake Controller in 2006 Dodge Ram 2500
- When installing the Dexter Predator DX2 Trailer Brake Controller # 58-8 with Wiring Adapter # 3020-S in your 2006 Dodge Ram 2500, the blue wire from the brake controller will connect to the blue wire from the harness.
I have added links to help articles on brake controllers and brake controller installation for you to check out as well.
view full answer... - Mounting Bracket for a Dexter Predator DX2 Brake Controller
- You should be able to use bracket # 2178. I have included a picture showing the measurements for you. I was able to read the instructions for the controller from the Dexter site but I can send you a copy in a separate email.
view full answer... - Is the Dexter Predator DX2 Trailer Brake Controller Compatible with a Triple Axle Trailer
- The Dexter Predator DX2 Trailer Brake Controller # 58-8 is only rated for up to 2 axles. If your trailer has 3 axles then I recommend the Tekonsha Primus IQ # TK90160 which is a proven proportional brake controller at a cost-effective price. This also uses the same wiring configuration as the DX2 so if you are splicing it in to your tow vehicle you will use the following:
Blue - 7-Way Output to Trailer
Black - 12V Power
White - Ground
Red - COLD Side of Stop Light Switch (only gets
view full answer... - Parts Needed to Install Trailer Brake Controller in 1993 and 1994 Chevy C/K Trucks
- Installing a Dexter Predator DX2 Trailer Brake Controller # 58-8 in a 1993 Chevy Silverado and 1994 Chevy Cheyenne, both of which are Chevy C/K Series pickup trucks, require both trucks to have their own 4-flat connectors and a brake controller wiring kit. However, since both trucks require the Predator to be hardwired, it would mean you would have to get two brake controllers or you would need to wire and un-wire the controller to change trucks; there are better options that will allow
view full answer... - Installing Dexter Predator Brake Controller on 2006 Ford F-150 with Factory 4-Way
- The reverse light wire on your 2006 Ford F-150 is likely purple or orange, though we have no way to know for sure (manufacturers have been known to change colors so a definitive answer is an impossibility). That said, you can find out pretty easily with Circuit Tester # PTW2979. When installing a brake controller you will need to use this to determine the functions of all wires on your 2006 Ford F-150 which has what I assume is the factory 4-way. I have added a link to a help article on
view full answer... - Display of Dexter 58-8 DX 2 Predator Brake Controller Lights Up Without Trailer Connected
- According to Dexter Axle, it's perfectly normal for the display to light up and display .0 when a trailer isn't connected.
This will happen regardless of if the vehicle is running, as the controller has a constant 12V connection to the vehicle battery.
view full answer... - Parts Needed to Add a Brake Controller to a 2012 Nissan Murano
- A brake controller will have to be hardwired to a 2012 Nissan Murano since there are no brake controller wiring harnesses designed to fit it. To do this you will need a few parts and the brake controller.
First, if your Murano does not already have a trailer connector you will start by installing a 4-Way using # 118653 for the regular Murano or # C59496 for a CrossCabriolet model.
Once the 4-Way is installed or if the Murano already has one you would then install # ETBC7 which includes
view full answer... - Brake Controller and Install Harness Recommendation for a 2015 Nissan Frontier
- For your 2015 Nissan Frontier the recommended install harness to use is the # 3050-S if you are wiring up a brake controller that has 4 blunt cut wires.
Or if you go with a Tekonsha controller like the P2 part # 90885 you would want the # 3050-P.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses
view full answer... - Recommended Brake Controller Harness for a 2009 Nissan Titan With Bare Wires On Brake Controller End
- Yes, the Tekonsha Wiring Adapter for Electric Brake Controllers part # 3050-S will plug into the tow package port on a 2009 Nissan Titan and then allow you to hardwire a brake controller of your choosing.
view full answer... - Universal Brake Controller Wiring Kit for 2017 Nissan Titan XD
- For your 2017 Nissan Titan XD the brake controller harness you are looking for is the part # 3050-S. This plugs into the portu under your dash and gives you 4 blunt cut wires you can wire to basicaly any brake controller.
view full answer... - Brake Controller Harness for 2017 Nissan Frontier
- There is a harness available that will splice into the brake controller and plug into your 2017 Nissan Frontier; the Tekonsha Wiring Adapter for Electric Brake Controllers - Nissan # 3050-S. I've added a link to a video review of this item for you to check out.
view full answer... - Where is the Brake Controller Wiring Port on a 2006 Nissan Frontier
- Your truck should have a port under the dash for connecting the brake control wiring adapter, part # 3050-S. I have added links below to the instructions that are included with the adapter that show the location of the port.
view full answer... - Installing Redarc Tow Pro Elite Brake Controller on 2016 Nissan NV 3500 with Factory Tow Package
- On your 2016 Nissan NV 3500 that's equipped with the factory tow package you can use the Wiring Adapter # 3050-S to easily install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. The plug end of the adapter will connect right to the factory port behind the dash of your NV 3500 and the pigtail end will just splice into the wires from the brake controller (color to color).
I have attached a short video review of the Tow Pro Elite that you can also check out, along with the
view full answer...
Info for these parts were:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Alexander C
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.