TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLF2018,TLF3007
Our Price: $853.16
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLF2018
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F2018 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Item # TLF2018
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLF3007
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F3007 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLF3007
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLF2018
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLF3007
Average Customer Rating: 4.7 out of 5 stars (3187 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Reed04/11/2023
2013 FordF-150
The units appeared to be well made and were nicely painted. I installed them on my F150. The tools and hardware supplied were of good quality and installation was straight forward. Two people would have been great, but I was able to install both sides in a little less than an hour. The holes all line up very well. I like these better than the previous units I had on my 2013, as they do not stick out as far - so less noticeable. The extension arms come out at a very nice angle just under the body. I find these units with quality I expected and I think they will be highly functional in attaching my camper.
by: Dot07/15/2022
I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
by: Jacob04/19/2024
They work great. Rear brackets are easy to install.
by: Barbara08/12/2023
2020 FordF-150
Arrived with missing pieces. My truck was at a shop where I had to make an appointment for the installation. They had to stop the installation because the two 2" X 2" spacers were missing. I had to run to Home Depot and buy a metal bar and spray paint for $30, and pay the installer $50 to cut and fabricate and paint the pieces to fit, otherwise I would not have been able to put my camper on the truck for my vacation. Pretty costly error because someone didn't pack all the pieces. I spent extra money for shipping too. Overall a really bad deal.
by: Brian 05/20/2024
everything fit together as it should---no problems at all
by: Steven06/08/2021
I have ordered several times from etrailer never had any problems products have always went on smoothly
by: David03/16/2021
It is always a great experience shopping with you. I have never had a problem finding what I need.
by: Carlton 05/12/2024
Installed great Just what I needed
by: Andrew04/15/2024
Fast free shipping, quality parts, and relatively simple to install.
by: Kelvin 02/26/2024
They look good but I haven't installed them yet, so I can't give an opinion about how good they are.
by: Dan A. 06/23/2017
These front tie downs bolt on easy and hold solid like you need. Low profile appearance - don't stand out when not using and inserts removed. Great product - love mine! I bought both the front and rear. You won't be disappointed.
by: Shoosh 04/07/2017
2016 FordF-150
Great product easy to install very happy with my purchase. Etrailer is a hassle free easy company to deal with, received updates on order confirmation and delivery! Very happy will do business again In the future.
by: Patrick M.10/02/2019
2018 FordF-150
The rear tie-downs have functioned very well, and were generally easy to install.
The corresponding front tie-downs were not so easy. They did not fit exactly, probably due to the fact that my F-150 had a heavy duty suspension and extra load capacity, so the alignment of holes was not perfect. I had to do some modification that was a challenge, but I succeeded (I think!). The system has functioned just fine for a couple of trips.
by: Pete04/23/2018
2016 FordF-150
Torklift tiedowns work great. I was worried about installing them myself but was able to do it. It was a little tricky but not too bad. Highly recommend. Installed on a 2016 Ford F-150.
by: Doug 09/24/2022
These went on as well as could be expected for where they are installed. The rears are easier than the fronts. The fronts went well with the provided instructions and the awesome bolt thread wires. Functionally they are perfect for holding down my camper.
by: Douglas 09/24/2022
These went on as well as could be expected for where they are installed. The rears are easier than the fronts. The fronts went well with the provided instructions and the awesome bolt thread wires. Functionally they are perfect for holding down my camper.
by: Dan A.06/23/2017
Bolt on easy and hold solid like you need. Low profile appearance - don't stand out when not using and inserts removed. Great product - love mine! You won't be dissapointed.
by: Owner01/08/2021
2017 FordF-150
The front torquelift camper mounts for my 2017 ford f150 supercab 6.5 bed required grinding resulting from interference with bed/frame mount. Lower shackle mount did not line up. Rear mounts installed with no problem.
by: James 09/09/2021
Easy to follow install instructions and able to 1 man install the kit. Took about 1 hour to install and once complete felt very secure, With help of rear supports as well it helped secure the cabover to truck for a more even load.
by: Michael05/20/2022
They worked just fine. Easy install,bolted right on. But now I have a newer truck with retractable running boards and they won't work. But original installation was great
by: Rob D06/06/2019
Was quite concerned when I went from an older F250 to a 2017 F150 in carrying my Truck Camper. The stable loads on the new truck gave me even greater stability and confidence than on my F250. Highly recommend them !
by: William03/18/2022
great set of camper tie downs for my f150! easy to install and remove.
by: Brian 05/20/2021
The tie downs were easy to install and are very convenient to use. The tie down brakets stay hidden until I need to slide the hangers in. Very simple.
by: Jacob 07/16/2021
Parts seem very solid and instructions were great. Customer service was great too. I had written an email inquiring as to why they're was such a delay in my shipping, and got a very reasonable and appropriate response. In addition, the delay shortened and my parts got here in time.
25
2451
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- Truck Bed Camper Tie Downs For 2016 F-150 Super Cab With 6-1/2 Foot Bed.
- I can help you out, see below for the part you need:
**TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2018.
*TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3007.
Linked are the parts you need to get your camper tied down to your 2016 F150 Super Cab with a 6.5 foot bed.
view full answer... - TorkLift Camper Tie Downs For A 2022 Ford F-150 4X4 With A 6-1/2' Bed
- For your 2022 Ford F-150, you'll need the:
-TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2018 for the front, and # TLF3007 for the rear.
Additonally, you're also need a set of turnbuckles like the TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9050A
view full answer... - Is Drilling Required When Installing TorkLift Camper Tie-Downs On 2015 Ford F-150
- I called my contact at TorkLift about the installation of the Camper Tie-Downs, part # TLF2018 and part # TLF3007 on your 2015 F-150.
They told me there is no drilling needed when installing the tie-downs. There are existing holes in the frame that are used for the installation.
view full answer... - Custom Fit Camper Tie Downs For A 2017 Ford F-150
- Yes, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2018 for the front and part # TLF3007 for the rear are a direct fit for your 2017 Ford F-150. These frame mounted tie down points are designed to be used for securing a truck bed camper to your vehicle. They are a custom fit option specifically designed to match your frame in addition to provide a virtually undetectable look while the removable arms are not in place.
In order to secure the truck bed camper to these tie
view full answer... - Do Torklift Tie Downs TLF2018 and TLF3007 Fit 2016 Ford F-150 with Aluminum Bed
- The part numbers # TLF2018 and # TLF3007 are a confirmed fit your 2016 Ford F-150 and will work just fine with the aluminum bed.
view full answer... - Truck Bed Camper Tie Downs for a 2016 F150 Super Cab Truck
- With your front sidewall being 6" wide you won't be able to use the truck bed style tie downs like you were wanting because they are only 5-1/4" in length. Instead I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2018 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3007.
I also recommend TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK.
view full answer... - Recommended TorkLift Camper Tie-Downs For A 2023 Ford F-150 5.5' Bed
- We don't have any word on someone trying the TorkLift # TLF2018 on a 5.5' bed, but according to TorkLift's fitment guide the # TLF2020 would be the correct fit as long as you don't have any running boards or flip out steps in the way. For the rear you would need part # TLF3007.
To complete the setup you'll also need turnbuckles, like the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020.
view full answer... - Camper Tie-Downs for 2018 Ford F-150 With 6-1/2 Foot Bed
- I can confirm for you that the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2018 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3007 are a fit for your 2018 Ford F-150 with a 6-1/2 foot bed, so long as you do NOT have a board or step underneath your truck bed and do NOT have an aftermarket hitch.
I have added links to video reviews of both tie-downs for you to check out as well.
view full answer... - Fit of TorkLift Frame-Mounted Camper Tie-Downs TLF2018 & TLF3007 on 2016 Ford F-150 w/ 6-1/2-ft Bed
- Both of the TorkLift Camper Tie-Downs you referenced, parts # TLF2018 and # TLF3007, are confirmed fits on your 2016 Ford F-150 with 6-1/2-foot bed if it is either a Crew cab or a Super cab. It will not fit a regular cab version according to my contact at Torklift. The under-bed step will need to be removed for installation.
Written installation details are linked for you.
view full answer... - Recommended Camper Tie-Downs for a 2023 Ford F-150 w/ 6-1/2 Foot Bed
- I would be happy to help! To mount a Travel Lite Camper in the bed of your 2023 Ford F-150 with a 6-1/2' bed you will need the following parts:
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLF2018
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLF3007
TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs item # TLS9020 if you do not already have chains
view full answer... - Torklift Front and Rear Camper Tie Downs for 2015 Ford F-150 with 6-1/2-Foot Bed
- TorkLift and etrailer cannot actually recommend using only front tie downs on any slide-in camper, even if it is a very light one.
Sure, you may have seen folks do this and they may have had no issues at all. But in the worst-case scenario where you have an incident and there is damage or injury to you or someone else, the absence of the rear tie-downs could make for some ugliness. I wish I could say go-for-it but I can't.
The front/rear tow down set # TLF2018 and # TLF3007 that
view full answer... - Will the Same Front Camper Tie Down Brackets Fit a 5-1/2 and 6-1/2 Foot Bed on 2016 Ford F-150
- Camper tie downs # TLF2019 are only for the 5-1/2 foot bed and # TLF2018 are only for the 6-1/2 foot bed. They cannot be used interchangeably between the different length beds on a Ford F-150.
So basically, the front tie downs will be different between the different bed lengths.
view full answer... - Truck Bed Camper Tie-Downs for a 2016 Ford F-150 Short Bed
- The product page you were looking at is a combination page of truck bed camper tie-downs, parts # TLF2018 for the front and # TLF3007 for the rear. They fit your 2016 Ford F-150 as long as you have a 6-1/2 foot bed and you don't have a step under the truck.
Together both kits weigh about 65 pounds total for shipping. So subtract a few pounds for the shipping materials but not a lot.
view full answer... - Camper Tie Dows for 2021 Ford F-150 Crew Cab Short Bed
- For your 2021 Ford F-150 Crew Cab Short Bed the Torklift Camper Tie Downs you'd want are the part # TLF2018 and # TLF3007.
view full answer... - Correct Truck Bed Camper Tie-Downs for a 2018 Ford F-150
- I do have a truck bed camper tie-down option for a 2018 Ford F-150 but HappiJac does not offer the HappiJac Truck-Mounted Camper Tie-Downs for this vehicle. Instead, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs which are actually drill-free options unlike the HappiJac Truck-Mounted Camper Tie-Downs. That said, I need to know the bed length and board/step option to confirm fit, the part # TLF2018 for front and part #TLF3007 for rear are for models with 6.5' bed, and no
view full answer... - Recommended TorkLift Camper Tie-Downs For 2020 Ford F-150 SuperCrew XL 4x2
- I reached out to TorkLift and the TorkLift Custom Frame-Mounted Camper Tie-Downs-Rear # TLF3007 is confirmed to fit your 2020 Ford F-150 SuperCrew XL 4x2 as long as it has the factory trailer hitch receiver.
The front tie-down will depend on if you have electric running boards, fixed running boards, and if you have the 5.5' or 6.5' bed.
If your truck has no running boards or electric running boards and the 5.5' bed you will need TorkLift Custom Frame-Mounted Camper Tie-Downs - Front
view full answer... - Torklift Camper Tie Downs that Fit 2019 Ford F-150 Raptor
- Thanks for all of the info on your 2019 Ford F-150 Raptor. Based on that the correct rear tie-down is the part # TLF3007 and the correct front is the part # TLF2020.
view full answer... - Do TorkLift Custom Frame Mounted Truck Bed Camper Tie Downs Include Brackets and Hardware
- Both the # TLF3007 and the # TLF2020 include the tie-down inserts, the frame brackets and all necessary installation hardware, both are complete kits that include everything needed to install the tie-downs.
Turnbuckles like the # TLS9522-2-LK locking TorkLift FastGun are sold separately.
I've linked to some product demonstration videos for both kits and the turnbuckles.
view full answer... - Availability of Torklift Tie Downs for 2023 Ford F-150 5-1/2 ft Bed
- At this time Torklift only has a set of the rear tie downs part # TLF3007 as a confirmed fit. Hopefully soon we get a front set as a fit as well.
view full answer... - Will Installing TorkLift Custom Tie-Downs TLF3007 Require Drilling Into Frame Of 2018 Ford F-150
- Since you do not have the a board or step underneath the vehicle and have a factory hitch on the 2018 Ford F-150 the rear TorkLift Tie-Downs part # TLF3007 do not require drilling into the frame for installation. They will install into the existing holes of your truck frame.
The front pair is Torklift Camper Tie-Downs part # TLF2018 for the 2018 Ford F-150 without board or step underneath with a factory hitch.
view full answer...
TorkLift Accessories
Fit to this rack on your 2021 Ford F-150
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Video Edited:
Dustin K
Installed by:
David F
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan A.
6/28/2018
Still very happy - great product - well made, thank you!