The Experience Has Been Great.The People I Have Spoken To Have Answered Any Questions I may have had. I have Nothing But positive Thoughts About The Company. I Will Purchase again!!!!!!!
From weekend gear to daily duty, a roof rack lets you carry cargo boxes, kayaks, boards, or a roof top tent. Match the system to your roof—raised side rails, naked roofs, or track-mounted camper shells—and consider wind noise, since square tubes can whistle while aero bars run quieter. Look for top channels or wrap-around clamps for accessories, and confirm liftgate, sunroof, and antenna clearance.
Yes, if your bars accept top channels or work with wrap-around clamps. Check that the crossbars extend at least 4" past the mounting feet, which some lift-assist carriers require. Slide the mounting nuts into the top channel; a quick shot of silicone spray can make them easier to insert. Verify your rail style and bar spacing match the carrier's fit guide.
If the shell has no tracks, use a track-mounted rack kit that adds tracks to the top and includes mounting legs and crossbars. Tracks can be trimmed to fit shorter tops. If your shell already has tracks, choose towers made to fit those tracks and pair them with the right bar length for your gear. Measure carefully and seal fasteners per the instructions.
Choose aero-style bars if you want quieter performance; users report minimal wind noise at highway speeds. Square bars can cause a turbulent vibration you'll hear around 40 mph and more at 60 mph. A fairing/deflector helped eliminate that vibration. If you notice a low whistle at lower speeds, small position changes and accessory placement can help reduce it.
Confirm your roof and rack meet the tent's minimum load requirement; some tents call for at least 165 lbs. If you'll leave the rack on full-time, look for designs that reduce drag and stay quiet. If you only use it with the tent, a simpler setup can work. Verify crossbar spacing matches your tent's mounts and that your vehicle's rails or fixed points are compatible.
Filters