Keep it clean and cohesive with white RV slide out parts made for Lippert systems. Match your wiring style—4-wire, 5-wire, or 6-prong hydraulic—to the setup you already have for smooth in/out operation. If a slide only moves one way, verify power, grounds, and the in/out leads during install to sort it out.
You'll need a 5-wire Lippert switch for a direct replacement. A 4-wire style on a 5-wire circuit can miswire and create heat, so stop and recheck if that happens. Identify power, ground, and the in/out leads with a multimeter near 12v, then match to the correct prongs. If unsure, use a 5-wire version that provides two grounds.
Choose a white Lippert hydraulic interior switch with 6 prongs for hydraulic slides. Confirm your slide is hydraulic, not electric, and match the 6-prong requirement on your existing switch. Wire per the directions to avoid reversed functions. If unsure, verify the slide brand is LCI before selecting.
No, a white Lippert switch won't substitute for a 5-wire setup. Match the switch to the prong/wire count on your original; mixing 4-wire with 5-wire can cause one-way operation or heat at the wires. Confirm you have an LCI slide-out system before ordering. Follow the wiring diagram closely during install.
Yes, a white Lippert switch can work with a Lippert controller. Verify the in/out leads: yellow is out and green is in on the harness mentioned. Check for proper 12v power and a solid ground. If the slide only goes out and not in, recheck these connections first, then consider a motor issue if wiring tests good.
Filters
