Get the right fit with Lippert RV slide out parts in black. Match seals by mounting style—push on, stick on, or track mount—and by profile, with options like a 1-1/4 inch wiper width and 2 inch total; for stops, note specs such as 3/4 - 10 course and 5/8 of an inch depth, and for switches, plan for 5-wire connections and wire color coding.
Yes, you can wire a second switch into the same circuits so it functions like the interior switch. Use 12 gauge wiring and 10-12 gauge quick splices. Verify each wire's function by color before connecting, and inspect for any heat damage at the old switch or connector before reusing wiring.
Match the mounting style and profile, not just the width. Check whether your current seal is push on, stick on, or track mount, and compare the base shape. A Lippert flat wiper can have a 1-1/4" wiper and a total width of 2". If it's sold per inch, enter the total inches you need when ordering.
Open the slide to access the stop, remove the nut, thread the old stop out, then thread the new one in and reinstall the nut. The thread is 3/4 - 10 coarse and the depth is 5/8"—confirm these before swapping. Make sure the stop location is fully exposed so you don't cross-thread during install.
The wiper portion is 1-1/4" wide unflattened, and the entire seal measures 2" wide. Measure your track slot and bulb shape to confirm fit, and verify how the seal mounts to your slide. If your track slot is a specific width, make sure the seal's base matches the mounting style.
Bulb Seal
Stop Can
Switch
RV Slide Out Parts Parts or Accessories
Filters
