# 1
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
I purchased both the parts of the tow system. I just purchase a Jeep Grand Cherokee (99) to pull behind our motorhome for week end trips. We just returned from the first week-end with access to a vehicle to move around the area, and short trips to town. It adds a wonderful dimension to the experience. This system allowed us to pull this vehicle with our motorhome, and I can say it pulled as if there was nothing behind me. It was quick to hook up, and easy to un-hook. My labor time to install was about 2 1/2 Hours, and went smoothly. This is a wonderful product, and works as desired. I have attached photos of the After installation, and the camp-site we stayed at, (proving we made it)
I've used this tow bar for my little Kia Rio5 Toad behind my 32' Itasca Class A motorhome. Reliable, easy to attach and remove, good construction. Had good experience recent trip from Seattle to Death Valley (7 percent grade in places!) and southern Arizona, over 4,000 miles round trip. It passed the acid test: driving I-5 south in Oregon, traffic suddenly came to a screeching halt ahead of us. We stopped with inches to spare from the car ahead of us. The TOAD stayed right behind, no jack knifing, etc. Good product.
# 2
Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs
The adjustable arms make this tow bar simple to hook up and disconnect. I can pull up behind our RV and hook up in about 3 minuets (including the wiring for our break buddy and putting the transfer in neutral). Disconnecting and stowing the bar is even faster. Although is tow bar is locked to the baseplate and folds flat it is so easy to remove I end up taking it off and putting it in the back when we will not be towing.
I was slightly nervous that this would be difficult to take on and off if I wasn't on flat ground. So for I have not had any issues and I really like that it hooks up to a 2 inch ball. My jeep has a lift on it and getting things level was easy with and adjustable height mount.
# 3
Blue Ox Acclaim Non-Binding Tow Bar - Coupler Style for 2" Ball - Car Mount - 5,000 lbs
While the quality of this units seems excellent, and it is a good price, I was unable to use it in my setup. I Bought it to go with the Blue Ox base plate for a 2014 Chevy Spark. That base plate sets the tow bar connections 23" above the ground. This tow bar requires a 7" rise from the base plate connection to the hitch. Meaning 30" above the ground at the hitch. In my rig, this would require a hitch riser of over 12". I have no complaints about the tow bar, however, it is not a good option with the 2014 Spark Blue Ox base plate.
Everything as advertised. Followed the videos and instructions for installing the base plates and tow bar and all were good. Did a test pull today and it towed great, straight as a dye. I only have 2 suggestions. There was no mention in the video of the space plate, which was included. Figured it out. Second suggestion, Install a 2" ball on your work bench and adjust the receiver to it. The instructions tell you what socket to adjust it with but that could have been done on the bench before shipping. Great product, so excited. We are off on a few hundred mile trip with the Fit behind the motorhome Wednesday. So excited. No more tow dolly.
# 4
Blue Ox Adventurer Adjustable Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
Works great on our Mini Cooper S Connects with removeable pins, making connections to the RV quick and easy.
There is not a lot of information on the internet about pulling this kind of VW. I did my homework and this works GREAT when pulling a standard transmission with key left in "ON" position. etrailer has a lot of variety to offer for different needs. This is the lower priced, plain Jane, no frills, less moving parts for something to go wrong - exactly what I was looking for tow bar. With little work it folds up for storage easily. Installation on our '98 diesel VW was clean and easy without incident (I do all my own modifications when needed. There is no rattling loose fit in tight corners or straight a ways. We don't even know we are pulling anything behind our '68 Dodge Travco B210 (modified with 5.9 Cummins)
# 5
Roadmaster StowMaster Tow Bar - 3" Lunette Ring - Car Mount - 6,000 lbs
Having used Roadmaster products for years imagine my surprise when after using my new hitch for only a month the right arm came apart while towing my car. I happened to be looking at it and was able to coast to a stop during a slight uphill grade which prevented my car from any further damage. As it turned out the bolts which hold the arms on had fallen out. Why I don’t know. I was able to use a temporary pin in the slot which allowed me to get to a hardware store where I replaced ALL the bolts holding both arms with grade 8 bolts and nylon locking nuts. The arm slid on the road, ground down a small corner and scuffed the paint but did not compromise the integrity of the hitch. The design works flawlessly even if the quality control could use some closer monitoring. All in all it’s still a great product. As you can see from the photos I doubled up the nylon locking nuts and have had no problems since.
Very satisfied with my etrailer experience William was very professional and knowledgeable I will definitely be a return customer
# 6
Roadmaster StowMaster Tow Bar - 2-1/2" Lunette Ring - Car Mount - 6,000 lbs
This is a great towbar! I deliver motorhomes professionally and I did use a Blue Ox that went into the receiver hitch that I had to move from hitch to hitch rain or shine. Now all I have to do is put my small lightweight pintle hitch hook into the receiver and just quickly drop this lunette ring onto it easily, but when I’m not using this at all it’s so easy to just remove the whole towbar from my vehicle. I also like how easy it is to fold up so that it’s all compact and out of the way when it’s stowed on the front of my vehicle. This makes my hooking up and unhooking so quick and easy. The only thing I don’t like is when I end my trip on a downhill or slightly turned it’s hard to get this towbar off of the pintle hitch by myself, but I have done it every time with a little back and forth moving of my vehicle.
I am using this on the front of a UTV to pull around so it is plenty strong for that and is working good. I ordered the pintle version so that I could fabricate a clevis style hitch and use a hitch pin to pull behind a pickup or tractor. I only gave 4 stars because the latch on the left sider sometimes has a hard time latching. I don't know if there is a way to adjust the lock or not.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"