Most Popular Utility Trailer for 2021 Ram 3500

Shipped fast. Fair price.

Received the product on the day specified at 4 p.m. installed in less than 2 hours ....great product

U-Bolts and hardware seem to be good quality. Package was delivered when promised. Very satisfied with purchase. Will be buying from E-Trailer again.

right on time, thanks

Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.

Click to Enlarge

Click to Enlarge

When I asked questions about my order they answered back quickly. Everything fit like it should. Yes time will tell if the springs are good.

just what we needed

My manufactured trailer did not have this type with a grease fitting. They wore out the bushing in no time. I really like the design and ability to lubricate the bushing.

Greatcostumer service Fast shepping!

We have had great experience with eTrailer, These parts came in as described.

Installed slippers Center Point system on out Alpine 3101RL 5ver. The install is straight foreward if your mechanically inclined. Now about the lack of instructions, nothing shipped from Lippert. etrailer provided a link to help with that. I do prefer printed instructions opposed having to scroll through my phone with dirty hands. The torque specs provided by Lippert don't align with normal torque charts for said fasteners. The banana shackles are very thin and unplated,they are just raw steel. For the cost of the suspension Lippert cound do better on the shackles in this kit. Lippert recommends in stalling the air gauge for the air bags outside,however to gauge is a cheap plastic model. I feel it would have a short life span exposed to the elements. The good now, it seems robust and likly to help absorb road shock. I have not had our 5ver on the road yet. But I will leave more feed back when I have. I purchased this suspension system after finding a broken main leaf on our front tandem. I replaced all of our leaf springs bushings and bolts with the wet bolts Supplied in the kit. FYI Lippert neverfail bushings fail in less than 7k miles. We are not over weight.

Just installed the lippert center point and I have to say very impressed on how well it’s built. Super easy to install and I can’t wait to take it down these California roads and see how much better it rides. Installed on a 2022 jayco eagle Ht 29.5 BHDS

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Trash !!!! 4 equalizers and just one it’s holding the weld now I’m losing money because my trailer suspension its not functioning

Click to Enlarge

These fit perfectly on my triple axle Kaufman trailer where I replaced all 4 of them. I got some commercial quality spray paint and painted them black. I'll also include some pictures of my old ones that were original with the trailer. You can see they definitely needed to be replaced! I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.

Click to Enlarge

Made installation simple.

Installed the dexter 3500 axle and new springs on my 17ft boat trailer and immediately drove the trailer for over 700 miles in one day and the trailer was as smooth as could be. Great axle even came with a tub of marine grease.

Always replace with new springs. No issues installing.

Have not installed them yet. They seem to be much better quality than the Equa-flex that came on the 5th wheel. Very happy with E-TRAILER and their knowledgeable staff.

Have only put about 3500 miles on these replacement equalizers but they appear to be getting the job done. I'm a little surprised at how much the rubber bushing portion is already compressed but will see long term. The order from etrailer was handled correctly and timely. Happy with the company.

Looked at another brand, decided I liked the Lippert better. Although it was $[XX] more than where I started I was willing to pay the extra due to it having a variable width and it being heavier built than the product I was looking at. Paula was excellent in assisting me with this product, (4) springs, u bolts, wet blots / shackle kit.

Click to Enlarge

We have had great experience with eTrailer, These parts came in as described.

This product here fits perfect on my trailer no adjustment needed to be done go etrailer .. it was cheap plus fast shipping..

Click to Enlarge

Easy to install. Saw in one of etrailers videos that this bronze bushing should replace the nylon bushing in the leaf springs we got. The nylon ones pounded out okay and these bronze bushings were a nice, tight fit back in.

I give this average rating, because I did get what I ordered, but the nuts for the wet bolts I ordered are extra, i ordered a triple axle upgrade kit which everything was included, so the bolt with out the nuts are useless, on your end someone must think, he’s ordering only bolts maybe check with the customer to make sure they get all they need for a repair.

I was looking for shock absorbers when I discovered this kit. I installed it in about a day and a half. The instructions are pretty good if you read them and follow them. We took the trailer about 100 miles last weekend. It seemed to ride smoother with this kit. Overall, I'm happy with it.

The shock kit just came today and I haven't a time that I will be installing it so no review just yet.

I upgraded my leaf springs to 4000lbs springs and needed longer axle U bolts and Quinn at etrailer was helpful getting the correct bolts headed my way.

Click to Enlarge

Click to Enlarge

These seem to be working ok but do not appear to be designed for use with the HD upgraded Moryde greaseable shackle kit that I purchased with them . You can see in the photos that they rub and bind

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Just what i needed since my original equalizers were completely worn out .

Click to Enlarge

Click to Enlarge

Click to Enlarge

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

Click to Enlarge

Holes did not line up with frame of trailer, had to cut out about 1/2in up on the 3in spacer. Otherwise, happy with the product.

Prior to installing this kit, I was unable to remove my tires without first deflating them. The same went for reinstallation. The kit works perfect and was easy to install. I'd recommend it for anyone needing to raise their trailer.

I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.

Happy with the online ordering.

Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.

Click to Enlarge