Most Popular 2 Bikes for 2019 Nissan Rogue

The process was so easy., from the search to the delivery. The products are of high-quality, and should last a long time with normal care. This is my third order with etrailer and I live there products. Everything is as advertised .If you need camping equipment then I recommend to buy from them.

Click to Enlarge

Yes I did receive the racks and they look great, my husband put them on and his comments were he wished the screws were longer, and the latch down loops were tough to get hooked over the bikes. Also we thought it would be nice if it came with some pads to keep the bikes from banging together or against our spare. Overall we lke the product, and the construction it seems sturdy and we like that it swings out of the way for ladder access. Your service was very prompt, which is always appreciated.

Click to Enlarge

Click to Enlarge

I ordered one of these a year ago and it arrived with critical welds missing. I contacted the manufacturer directly and they sent me a brand new unit. Mounting was easy (with the right tools). I did swap out the crummy fasteners that they supply for attaching to the trailer tongue with grade 8 yellow zinc plated fasteners from [online]. It is holding up great and makes bike carrying super easy. I like that I can see them in the rear view mirror and see if anything is coming loose. I used a cheap bike rack on this and flipped the arms of the rack around rearward to keep the bikes close to the front of the travel trailer. This also allows me to fully open the hatch of my tow vehicle when the bikes are mounted. So overall this is a nice addition that avoids trying to mount anything to the flimsy rear bumper of the travel trailer, although it does add some tongue weight. I am super happy with it so far and it looks nice a year later despite having sat outside 100% of the time.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I was looking for a way to mount a bike carrier on my 2016 Flagstaff Superlite TT. Due to the low ground clearance (14" rims) I couldn't relocate the rear bumper mounted spare underneath travel trailer. Tow vehicle is 2015 Ram 1500 4x2. Settled on the SC Bike Bunk plus Let's Go Aero BikeWing2 mounted as far back on front frame as possible so the bike bunk clears the propane bottle cover and maximizes distance between back of truck and bikes when turning. Success! I also made spacers ( bar stock from Home Depot cut down & painted black. see pic) which raised Bike Bunk up another 3/4" (every little bit helps!). My 26" wheeled bikes have 5.5" clearance above tailgate top. 29er will only have 2.5". No issues on flat ground whatsoever; concern may be up & over curb turning into gas stations with 29ers (not tested yet); 26" bikes no clearance issues experienced at all. Hint: GoAero rack tilts forward so I use trailer electric front jack to lower the whole front of trailer down when loading & unloading bikes. Easy peasy no step ladder. required!

Click to Enlarge

The bicycle rack mounted easily by myself without help from another person. It is very strong and holds our two bicycles just as I had hoped. I slipped a pool noodle over the upright support bar to prevent scratching the inside bicycle. The only thing I can suggest is that the product would have been better if it included the cover for the upright support pole and some strapping material to keep the bicycles solidly in place while traveling. The strapping material is not a big priority for me though because I have lots of it.

Click to Enlarge

Click to Enlarge

This was a great compromise in cost, ease of install and use. Easily attached to the bumper (and saved cost as I didn't need to install a hitch on the RV). Bikes went in well, but needed to use pool noodles to insulate the bikes from each other and from the central pole. (Will switch to more sturdy pipe insulation next time). Add some bungies and velcro straps (to hold the wheels) and you're all set. Held our 2 mountain bikes flawlessly over our 8,000 mile road trip last summer.

Works great! Our bikes have low cross bars so it took a bit to figure out the "sweet spot" for the holding arms. Finally get the bikes out of the camper when traveling; yipee!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Bike Carrier works well. Quick and easy install and bike setup. However, I had to modify hitch extension bar supplied by 2” to avoid handle bar coming in contact with camper.

Click to Enlarge

We love our Hollywood RV Rider Bike Rack. We have loaded it on our 87 Jeep Wrangler, our ‘06 Lexus, and our ‘83 Pilot. It is a perfect fit on all three! We needed the extra length to clear our rear mount tire on our Jeep. It worked! We have taken our 4”fat tire e-bikes on many roads from northern Idaho to southern Arizona. The bikes travel well and sturdy on this heavy weight rack. We feel very confident that they stay in place. We are able to load our bikes in a few minutes and hit the road in no time. It is very easy to load. We recommend using the bar grip extenders (which came in the package) to compact the storage area. This rack comes with a tip mechanism to allow you to tip the bikes down to access the rear trunk or hatchback.

Click to Enlarge

I have had several name brand bike racks and the Hollywood Racks RV Rider is by far the best. The rack is very sturdy and lite weight. It was easy to assemble with very good instructions. The rack fits our fat tire e-bikes and my SUV perfectly. The rack is very easy to adjust and while it sits high as to not drag the bikes when exiting parking lots, loading our 60lb e-bikes is no problem at all with the appropriate nethod, one wheel at a time. It is also possible to lean the rack to access the rear hatch on my SUV. The main reason for purchasing the rack is it is certified to mount behind a motorhome or on an SUV while being flat towed. There is literally no movement or sway of the rack behind the SUV. Very happy with this rack.

Click to Enlarge