# 1
Titan Forged Pintle Hook Mounting Plate for 2-1/2" Trailer Hitches - 18,000 lbs
Very well built piece
The ball/pintle mounting plate worked very well. I was surprised that it stuck out past the bumper so far on my 2008 Silverado 2500HD, but it was only about 4-5 inchest past where my ball usually sits with other hitches. I suppose it will work well as strong as it is to take care of anyone who choses to park to close to me in parking lots! :-)
# 2
Curt Pintle Hook for 2-1/2" Hitches - 20,000 lbs
Working great I use the fixed straight hitch when I need a little more hitch height or the adjustable hitch depending on which application works better.
Etrailer is my go-to place for anything trailer related. Good quality, excellent service, prompt delivery. Doesn't get much better than this! Keep up the good work...
# 3
B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
Works great to replace my 2 inch unit for my Silverado 2500HD
As usual, very pleased with customer service and prompt shipping.
# 4
Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches - 25,000 lbs
This review is for all the products I have recently bought from e trailer. First of all, no one will ever steal this hitch from my truck. It weighs way too much. It is rock solid!! A3” square 30k hitch plate, and a 30k pintle hitch! Drop it on your toe and it’s an instant amputation!! I love it!! But of all, customer service is beyond belief. I can only dream of having customer in my business this good! The best!!
etrailer and inventory is outstanding
# 5
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
# 6
Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank
works great fast shipping A+++++++++++++++++++
As advertised, good quality of workmanship and finish
# 7
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
Use this with a curt 16k combination ball/pintle hitch and am very satisfied so far. No drama purchase via Etrailer, and when the torque spec for the hitch — inexplicably — wasn’t included in the literature a call to their friendly team fixed this issue.
good quality, showed up with scratches and dinged up but etrailer did make it right.
# 8
B&W Tow & Stow Pintle Hook - 2-5/16" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
I like the hitch but it is NOT usable for A pintle hitch. The bottom plate where the ring rides in the hitch is flat and very slick and the ring slams around when you turn, stop, and start off. This is VERRY DANGEROUS as it could snap the ball off. If the bottom plate had A place for the ring to lay in it would solve Your Problem. I would like to hear from you Thanks!
The hitch works perfectly on both 2-5/15 ball or pintle ring trailers. When not in use it neatly stows under the truck frame hitch receiver. Two pins and it swings under removing the hazard of someone or something hitting the hitch if were protruding out like traditional ones.
# 9
Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
I do like the strength of the product. The flaws were the actual bolt on the top piece broke off holding the locking pin first week (allen key bolt). I also have to spray or grease the top piece that opens and closes and the rain rusts the joint quickly and is almost impossible to lift up by hand. I would look to purchase another product here since the price is right, but am not happy with the day to day use of this hitch at all. I do not have a picture at the moment, but if I can, I will show some of the issues. Thanks.
# 10
Curt SecureLatch Pintle Hook and Mount with 2" Ball - 2-1/2" Hitches - 20,000 lbs
High quality securelatch. I used it to pull a trailer full of hay and it held up great.
Have had this for a year. Super easy to work with going between a dump trailer hauling logs and my bandit 15xp chipper. Holding up well without any problems.
# 11
B&W Tow & Stow Pintle Hook with 2" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
Works perfectly service was great
Sale representative Nicole B provided me with impeccable service. She knew exactly what I needed to tow my boat and trailers. Her expert advise was just what I needed to fully understand that my purchase was right for me. This BW trailer is very heavy duty and versatile. I am extremely happy with my etrailer experience and product I purchased. Thank you.
# 12
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
# 13
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Fantastic product. Not one complaint.
# 14
Buyers Combination Pintle Hook with 2" Ball - 2-1/2" Hitches - 20,000 lbs
Worked perfectly for our needs!
# 15
Curt Pintle Hook for 2" Hitches - 20,000 lbs
Great hitch for hauling my tractor. The team at etrailer is awesome. Keep up the great work - I love all the pics and videos.
Fits to loose in the receiver. Made in China.
# 16
Buyers Products 2" Pintle Hook Mount - 3 Position - 9" Shank
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"