bing tracking image

Most Popular Trunk Bike Racks for 2013 Ford Escape

change vehicle


Bike Rack Videos

Saris Bones Trunk Bike Racks Review - 2013 Ford Escape

Today on our 2013 Ford Escape, we're doing a test fit of the Saris Bones trunk mount 3-bike rack. That part number is S8801. Now, we already have our bike secured down. We're first going to show you how we do that then we'll go over some features of the rack itself. We have three straps altogether holding our bike into place, two on our frame here and one as our anti-sway strap. We're going to start by releasing our two frame straps first.



Yakima Trunk Bike Racks Review - 2013 Ford Escape

Today on our 2013 Ford Escape, we're doing a test fit of the Yakima half back 3 trunk mount bike rack. That part number is Y02635. Now we already have our bike secured in place. We're first going to show you how we do that. We have 2 cradles with 3 straps or zip strips as Yakima calls them. We're going to have the two on the top here and one as our anti-sway in the back. We can remove our bike and set it off to the side. With the bike removed, I always suggest that you replace your zip strips so you don't lose or damage them. Now we can take a few measurements.



Yakima Trunk Bike Racks Review - 2013 Ford Escape Y02636

Today on our 2013 Ford Escape, we are doing a test fit of the Yakima HalfBack 2 Trunk Bike Rack. That part number is Y02636. Now, we already have our bike secured down. We are first going to show you how we do that. We have 2 cradles in place with 3 straps, 2 on our frame and 1 as our anti-sway strap in the back. We are going to start by releasing our 2 top straps first.



Yakima Trunk Bike Racks Review - 2013 Ford Escape Y02634

Today on our 2013 Ford Escape, we're doing a test fit of the Yakima Fullback 2 trunk mount bike rack. That part number is Y02634. Now, we already have our bike secured down. We're first going to show you how we do that. We have two cradles in place with three straps, also called zip strips. We've got two on our frame here and one as our anti-sway.



Yakima Trunk Bike Racks Review - 2013 Ford Escape Y02633

Female 1: Today on our 2013 Ford Escape, we're doing a test fit of the Yakuma Full-Back 3 Trunk Mount Bike Rack. That part number is Y02633. Now, we already have our bike secured down; first going to show you how we do that and then we'll go over some features. We have 2 cradles in place with 3 straps, also known as 'zip-strips;' we're going to start by removing those. We have the last one here as our anti-sway. We can remove our bike, set it off to the side, and then, with our bike out of the way, I always suggest that you replace your zip strips so you don't lose or damage them. With those re-attached, we'll start off with some measurements here. First is going to be overall what we're adding to our vehicle with our arms hanging out.



Yakima QuickBack 2 Bike Rack Review - 2013 Ford Escape

Today on our 2013 Ford Escape well be test fitting the Yakima Quickback II trunk mounted carrier, part number Y02621. To begin our test fit well set the carrier onto the vehicle just below the license plate. Well put the top hook to the top part of the cargo door, the side hooks to the side part of the cargo door just below the taillights and the bottom hooks to the bottom part of the cargo door. You may have to open your cargo door to get the bottom hooks in. Well then tighten down the straps to secure the carrier to the vehicle. We can then secure the excess slack with the included tie down points.



Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Ford Escape

Today on our 2013 Ford Escape well be test fitting the Hollywood Racks Expedition two bike carrier trunk mount, part number HRF6-2. To begin our test fit well set the carrier onto the vehicle using the top set of levers on the left and right hand side of the carrier we will use to adjust the carrier to the vehicle. Well take the top straps, hook them to the top part of the cargo door, the side straps to the side part of the cargo door just below the taillights and the bottom straps to the bottom part of the cargo door. Well then tighten down the straps to secure the carrier to the vehicle. Now tha the carrier is secured to the vehicle were ready to load our bike. Well use the second set of levers on the left and right hand side of the carrier to swing out the cradle arms.



Hollywood Racks Baja 2 Trunk Bike Rack Review - 2013 Ford Escape

Today on our 2013 Ford Escape well be test fitting the Hollywood Racks Baja two bike carrier trunk mount, part number HRB2. To begin our test fit well set the carrier onto the vehicle and use the levers on the left and right side of the carrier to adjust the arms. The cradle arms will need to be level or slightly angled up. Once weve established this position well go ahead and lock the arms in place. Well put the top straps to the top part of the cargo door and the bottom straps to the bottom part of the cargo door. Well then tighten down the straps to secure the carrier to the vehicle.





2013 Ford Escape Bike Rack Questions