Most Popular Plug and Lead for 2009 Volkswagen Jetta SportWagen

Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.

I have ordered from Etrailer several times over the years. Always have exactly what I need. Good prices and fast shipping. Could not be happier. This wiring harness was perfect. Installed it in a few minutes. Thanks.

This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Replaced the wiring and lights on my 1992 boat trailer. I was able to get everything needed from etrailer. I think Optronics is of the highest quality and recommend both etrailer and Optronics product.

Works very well after re-wiring trailer lights with waterproof distribution box.

Heavy duty plug that has a good snug fit and I like the jacketed cord that provides strength and extra protection.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

Click to Enlarge

Click to Enlarge

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.

Click to Enlarge

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years

Click to Enlarge

Click to Enlarge

Great product. Works well when I had a broken connection on my 4 way plug end on my light-up hitch cover I bought from y'all a while back. Always a happy customer. Thanks, George.

Click to Enlarge

Overall, I was very impressed by this connector. I used it as an in-bed connector for my gooseneck trailers. The plug seems to be a quality product, engineered to stand up to some abuse. I like how the mounting bolt heads recess into the connector and also how the bottom of the connector is elongated to help support the weight of the plug and wiring. I think it has a great shot at lasting for a very long time. The hinge is predominately plastic that will not corrode and break like the many I've had in the past.

Click to Enlarge

Great Product quick and easy install.

Still works great. The light up feature is great for knowing if a lighting problem is the vehicle or trailer.

The yellow wire coating is cracking and flaking off.

These guys are the best! Just about every product imaginable, super service. Obtain alla my trailer stuff from etrailer.

Very high quality plug and wiring. The led lights are awesome

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

Click to Enlarge

Click to Enlarge

After a year doing its job well.

I fitted the Hopkins 5-way flat connector harness with a 5-way round plug which couples to my Goldwing trike (tow vehicle). The popup trailer lights operate as designed.

Connector and wire harness well made - connector designed such that it can be mounted and harness has added protection for wires. Would like to have marine grade wire since I do mostly saltwater fishing. I mounted the connector on a piece of 1.5" square galvanized tubing painted black.

Click to Enlarge

Click to Enlarge

Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.

Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.

Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This is a product that I needed for my project, but was not easily found and available. etrailer.com not only had the product, but had it at a great price. Shipping was very fast and free for the amount I ordered. Overall, this was a great shopping experience. I made a bulk order of 16 as I am manufacturing trailers that are towed behind motorcycles. This product gives me the six conductors that I need in a very small package, which is great due to the size of motorcycles compared to cars or trucks. The only thing that could be improved with this product would be if they came with dust caps for each connector, or at least one for the vehicle side to prevent dust and moisture intrusion while the trailer is not in use. Keep up the excellent service and selection.

Click to Enlarge

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Click to Enlarge

Click to Enlarge

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

I just installed this on my 2015 Volvo XC70. I also used the Curt XC70 plug and Play for wire kit. I watch two of etrailers excellent insulation videos. Installing the hitch and both the wiring products took me around 3.5 hours. I think Curt products are great and they are reasonably priced! e-Trailer makes your DIY installations easy. You just need to take your time when removing interior panels and double check your work. I used Volvo's torque specs for the bumper parts when I installed the hitch. E-trailer doesn't stop with just hitches and wiring solutions, they have just about anything you need to load and haul overhead or behind safely. What about performance? E-trailers got you covered. If you get in a jam during the insulation, don't fret or worry, call the text at e-trailer and they'll walk you through it. I want to thank E trailer and their professional staff for helping me with my truck and auto towing and lighting solution for over 10 years now!

Click to Enlarge

Click to Enlarge

This was/is a critical piece of any towing system, and as such requires extra care to hook up properly . I would recommend testing each connection as you hook it up being extra careful to make sure you are matching the terminals in the mating connector properly. This harness/connector performs perfectly when properly installed.