Summer Starts Here - Save up to 70%
# 1
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
Works as intended. Gives me the view I need on my 2002 Sport trac when towing our camper
Look good, easy to adjust, only thing I don't care for is the vibrated view.
# 2
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
Works as intended. Gives me the view I need on my 2002 Sport trac when towing our camper
Look good, easy to adjust, only thing I don't care for is the vibrated view.
# 3
CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2
These towing mirrors are good quality and easy to attach to the mirrors on my truck.
Finally, we got extended mirrors for our 2016 Sequoia. OEM mirrors are manageable but inefficient when backing up or switching lanes with a Travel Trailer. The only issue with the extended mirrors is that they vibrate to the extent you get hypnotized. They work best at slow speeds, backing in campgrounds or switching lanes at slow speeds. Sixty-five miles, forget it. Use your best judgment. If the mirrors are well molded into place, the vibration may be minimized. The team at etrailer, from start to finish, was fabulous. Thanks
# 4
K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair
They will not stay on the mirrors for a 2023 Grand Cherokee. After very careful installation they fell off because the shape of the mirror is rounded and you cannot get a good grip to hold the mirror on
Kia SorentoThe mirrors worked better than I expected and fit a Kia Sorento quite well. The design is pretty easy to mount and dismount once they're set up.Ive wind tested them to 72 mph when passing and they've held tight
# 5
CIPA Universal Towing Mirrors - Clip On - Qty 2
So-so construction and design. With one modification they're more than acceptable. The arms and straps will slip and loosen if installed on triangular or tapered housings. Mirrors that have backs nearly parallel to the mirror face, and have upper and lower mirror edges that are nearly parallel are not affected. Adding a peel and stick plastic wall hanger to a tapered housing will stop the strap from slipping and loosening. The ball and socket mount is good and tight, but the stud on the ball is loose in the arm. I think most of the jitter and vibration others report is from this sloppy clearance that the stud screw can't tighten enough. I'll be addressing that as well. A nice option for those of us that a) don't tow a majority of the time and don't want full time extended mirrors, and/or b) tow with multiple vehicles and prefer to have adjustability to fit our 'fleet'.
# 6
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
I would like it to be extendable a bit further on the passenger side. The driver's side is fine though. The passenger side does not let one see far enough away from the side of the trailer. All in all, I like it better than drilling holes into the doors of my pickup to install huge mirrors. These look way better and are sufficient.
Not long after putting on the truck, the mirror fell off
# 7
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
We haven't used them yet while driving the RV, but the fit is perfect! Very happy with these extenders
Really loved my cipa mirrors on my Chevy. The dodge mirrors are tight if you use the right thickness wedge. Problem I have is that if your backing up and want to pan the factory mirror down for rocks or stumps the overhanging lip of the cipa mirror stopes the factory mirror. Will have to grind some off that lip for factory mirrors tilt up or down to clear for the tilt of factory mirror.
# 8
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
They were delivered expeditiously, went right on as per the instructions and they are fully adjustable so I can now see both sides of the trailer when straight. It is a 8.5 foot wide enclosed car trailer. All good here.
Unbelievably fast shipping and exactly what i was looking for with out spending 500 bucks on factory tow mirrors this is a great product
# 9
CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
The mirrors fit my 1997 Ford F250 HD perfectly. The threaded clips and threaded nob are cheap. The plastic threads that tighten the mirror to the vehicle are easily damaged. Mirrors would be better if the clips were made better. Giving 4 stars based on the flimsy clips.
The concept is great, however the connection to the mirror has a plastic screw, not the ones shown here in the picture which look to be metal. I have not even used the mirrors and first time removing them, the plastic screw (why??) breaks.
# 10
CIPA Universal Towing Mirrors - Clamp On - Qty 2
2019 Honda RidgelineA nice alternative for temporary mirrors for trailer hauling. They didn't interfere with the remote mirror adjustment on the factory installed outside mirrors and held securely once adjusted. I used them on a 2019 Honda Ridgeline.
We needed these extended mirrors on our van when pulling our camper. They fit perfect on our 2014 E250. Husband was very happy with the added rear vision they provide. The mirrors stayed put and adjusted even on the interstate. Great purchase!
# 11
Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
hello am very happy with my extended mirrors that i ordered they was very helpful to make sure i got the correct ones for my vehicle and sent them out and was able to track them on line to see when they would arrive and they fit perfect very happy with the service and product thanks
Perfect fit!
# 12
K-Source Universal Towing Mirrors - Clip On - Flat Mirror - Qty 2
Very good quality construction. Very good fit for a non-custom mount. Thick rubber straps are stretched over the car’s side mirror and hold the mirror well. My car is a 2017 Ford Expedition EL. Note: when you fold in the car mirror the towing mirror partially blocks the progress so that mirror stops early. It is still folded but not as completely as without the tow mirror. And yes, they are two identical mirrors so on one side the straps go up, on the other side they go down.
BUYER BEWARE!!!!!! I had great hopes for these mirrors. They look great. They appear to be very adjustable right out package. They fit on my Tacoma securely. They don't interfere with the function of the stock mirrors. Everything was moving along "swimmingly". Then I sit inside my truck to do the final adjustment (moving the actual mirror to get the correct setting and lock it into the "sweet spot"). The new Mirror is very stiff...doesn't want to move. Well, its new...so....Okay, I don't want to ruin anything...so.... No worries, I go get a phillips screwdriver to loosen the back screw a smidge so the friction adjustment can work . Come back start to back the screw out just a smidge...nope...still can't adjust the...wait...unscrew some more....that's not an adjustment screw at all. That just screws directly into the back of the mirror to hold it solidly in place. Worse yet, There is no friction mechanism on the back of the mirror at all. It is one solid piece of plastic. The molded plastic replicates the look as if it has the ability to move, but in reality....There is no way to do small mirror corrections once you have this thing installed. What the Actual people?????!!!!!!???? If you can't do minor adjustments to the mirror while you are in the vehicle, then the mirror is completely useless. I wouldn't recommend this product to my worst enemy. It's a piece of crap. DO NOT BUY!!!! A complete waste of time, money, and shipping costs. Now, I have to incur more shipping costs to send this POS back to etrailer. Hey, etrailer....Do Better next time!!!!
What our customers are saying:
"GREAT JOB! Lightening fast response and shipping."