Best 2008 Jeep Wrangler Unlimited Trailer Wirings

Chose this unit over the one that came with the Universal Kit. Just because of looks are ease of use nothing wrong with the kit. Easy install very simple if you are handy with wiring and connecting electrical.

Superb quality product. Silly simple installation. Took about 1 hour. Received product within a few days as promised. etrailer is excellent and highly recommended. No need to waste time shopping other sites.

Came quick and hooked right up. No problems at all.

I'm very pleased with this adapter.

Super easy installation! Only took 10 minutes and all parts necessary to complete are included!

Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.

Works perfect no problems with hooking up the wire to to the back up light...perfect adapter .

Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.

Never been disappointed with your products and the free shipping is always appreciated. Thanks for the fast service.

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Although I am commenting on this product, I actually would like to comment on the following products. I purchased a brake system, tow bar, base plates and wire harness from etrailer. All of my orders were filled in a timely manner. When I reached out for technical assistance, the advisors were readily accessible. All of the products were installed by me. All of the products were very easy to install by using the video and instructions.

Click to Enlarge

Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service

Click to Enlarge

Click to Enlarge

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Needed a longer connector for my vehicles. Both have 7 way plugs, but I use a trailer with a 4 flat plug. The coiled adapter works great for both of the vehicles. Very good product if you need some extra length and the fact that it has the coils makes for a better appearance.

great plug well made easy install etrailer and all the folks there are wonderful will recommend and buy from again I have gotten several things from them already I am rigging up my new jku to be a toad behind my motor home. everything from tow bar base plate and wiring has been just what they said it to be and very simple to save money and do it your self, I have lots of experience but seriously if you can change your own oil you can do this kind of work also. AAAAAAA+

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

Worked great

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

Click to Enlarge

Did the job well, took black paint and melted in to the front bumper.

it worked well, thanks for a quick response

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.

Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.

Neat product and fair priced

ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.

This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.

Click to Enlarge

II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.

Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.

Click to Enlarge

Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.

Click to Enlarge

Click to Enlarge

I bought a couple items through etrailer. Shipping and correspondence were great. I would recommend buying through them.

No issues, as advertised

no problem as advertised

I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.