# 1
B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
# 2
Curt X5 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Trailer Hitches - 20,000 lbs
It is a great investment. I did not want to put the rails in my truck and this was the answer to utilize my gooseneck set up for my fifth wheel. It also provides a lot of room in the bed of my truck
It does what it's supposed to
# 3
B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
Perfect set up for my ram megacab short bed. Tows quiet never had any rattling and the slider definitely helps in tight situations.
# 4
Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter - Single Jaw - 21,000 lbs
The hitch is easy to ensemble. Great design. Pulled my trailer great! But when I hooked up the second time to the trailer the roll pin that goes in the locking bar fell out. Wasn't a really big deal. But if I hadn't had any tools and a 1/4" bolt with a lock nut I probably won't have been able to hook up. Maybe they could change that. The best adapter from gooseneck to fifth wheel.But all in all very happy with it.
The hitch is much heaver and better built than it appears in the online photo. It was easy to install over my gooseneck ball took less than 20 min. rides nice with almost no noise. The set up also has about 3" of offset this was nice as I pull with a 6.5 bed ram 2500.
# 5
B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 25,000 lbs
I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.
# 6
Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs
Put this setup on a 2021 pj flatbed with a recessed gooseneck (believe it's a b&m 30k kit) in it from the factory. The top of the ball is about 1/8"-3/16" lower than the deck. Took a few tries to make everything fit along with some modifications to the set screws. I had to trim off about 1/4" on the bottom set screw to clear my opening. Also I can't set the 5th wheel height to the lowest setting because the upright casting sticks out the bottom of the frame. One could trim that off as well but then you lose the hole for the highest setting. Gonna run in the middle setting and if I have to, I'll trim off the excess to make it sit lower. Bed is on a 2014 Ram 4500. Top of bed to ground with no load is 41.5" at the rear axle. Overall looks like it will work for what I'm doing.
The hitch is easy to ensemble. Great design. Pulled my trailer great! But when I hooked up the second time to the trailer the roll pin that goes in the locking bar fell out. Wasn't a really big deal. But if I hadn't had any tools and a 1/4" bolt with a lock nut I probably won't have been able to hook up. Maybe they could change that. The best adapter from gooseneck to fifth wheel.But all in all very happy with it.
# 7
Demco 5th Wheel Base Rails Adapter for B&W Turnoverball Gooseneck Hitches
This hitch mount is great! I can now swap over from my 5th wheel hitch to a gooseneck in minutes. This is a great product. I had a gooseneck hitch already installed in my pick up but needed to tow my 29 foot 5th wheel. I other mounts to install the 5the wheel to my 2013 Ram but the gooseneck hitch mount was in the way. Found this set up on line at etrailer.com . Fast shipping, Ez to get my order in. 100 % satisfied. Plug and play. Took less than 10 minutes to install.
This product worked great. Used it in a 2016 Ram 2500 4x4 with the B&W turnover ball. The only problem is the safety chains for the B&W wont let this set flat against the bed of the truck. I solved this problem by using a heavy duty 1/4 inch rubber bed mat between the bed and this bracket and cut the rubber around the B&W hole and safety chains. That helped take up the extra space and helped to protect the spray in bed liner from being rubbed. Had no problems towing my fifth wheel and was happy I don't have these rails permanently mounted in my truck bed.
# 8
Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock Gooseneck Trailer Hitches - 20,000 lbs
Fits perfectly into curt goose neck hitch. My reese 5th wheel hitch fits on the rails perfect. I haul dirt bikes in my truck so being able to take the rails out is perfect..... nothing in the way of loading or unloading
Fits a little loose but all in all ez install great solution to utilize all Towing capabilities
# 9
Curt X5 5th-Wheel Base Rail Adapter Plate for EZr Double Lock Gooseneck Trailer Hitch
Fits perfectly into curt goose neck hitch. My reese 5th wheel hitch fits on the rails perfect. I haul dirt bikes in my truck so being able to take the rails out is perfect..... nothing in the way of loading or unloading
Fits a little loose but all in all ez install great solution to utilize all Towing capabilities
# 10
B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches
I had borrowed an adapter from someone. It was the same as the one I purchased from you. I made several trips pulling a four horse goose neck trailer with no problems, so I decided to purchase an adapter of my own.
Fantastic service and follow up
TorkLift SuperHitch Trailer Hitch SuperTruss Hitch Extension Installation - 2008 Dodge Ram Pickup
Ryan: How's it going Ryan here at etrailer.com. Today on our 2008 Ram 2500, we're going to be taking a look at the TorkLift SuperTruss Extension. Now this is going to be specifically designed to work with the Torklift Super Hitch, and it's going to be a great solution for those of you that have an in-bed 00:00:19 camper, that still want to pull your trailer. Now, the reason the extension is going to make life a whole lot easier, is because sometimes those in-bed campers can actually overhang well past the beginning of our trailer hitch. So whenever you use an extension, it's going to bring that receiver tube opening out past our end bed camper, making life a lot easier to hook and unhook.Now, this is a 42 inch model and there are different lengths available to suit your specific length needs. For example, if your camper comes out to here, you may need one that's a little bit shorter as opposed to the 42 that we have.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."