Most Popular Adapts Trailer for 1999 Chevrolet Silverado

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Very easy to install and the directions were very easy to understand and follow.

I have a 2019 f250 with the 6.5' bed and didn't want a heavy, bulky fifth wheel hitch taking all the bed space up. I had the fifth wheel package already installed as well, so it didn't make sense to not use that. I about went with the ultimate hitch that Anderson offers but decided against that as I have seen many reviews where the hitch failed. I saved a bunch of cash going with this product and it is awesome. I installed it by myself in my drive way in about 2 hours start to finish. I have zero issues turning so close to a 90*. I have a headache rack on my truck and it gets within an inch or two of hitting that but not my truck. I don't have any issues with the king box hitting the bed either like some people stated. The test ride today went very well. It rode very smooth and I have plenty of bed space for my dogs and gear. I would highly suggest this product if you are on the fence like I was. I will see how this will hold up over the years but I doubt I will have any issues. The shipping effected the sheath covering over the cable, I contacted the company, sent some pictures and they will be sending me a brand new part. I love this company and the products they stand behind!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Very easy to install and the directions were very easy to understand and follow.

I returned it, because it was going to change the structural integrity of my 5th wheel camper. Did not use the product.

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Not As Advertised and Horrible Customer Service at Reese! The pinbox came without installation hardware or directions. The hardware took a month to replace and again came without directions. The pinbox DOES NOT have the air valve as pictured. When I called Reese I was told it was due to a parts shortage and the person I spoke to told (Paul) me the new set-up was a dumb design. I TOTALLY AGEE!! To inflate one person has to literally crawl under the pinbox while hitched to inflate while another watches the bar. Not easy for a 60+ year old fat man! The valve faces OPPOSITE the bar side. Just dumb. When etrailer followed up they were basically told I have to live with it. NO - NOT HAPPY!

Click to Enlarge

My camper is 4 yrs old. I was using a gooseneck offset adapter to hitch fifth wheel to truck B&W gooseneck hitch. I upgraded to the Reese 16k Goosebox with a recommendation from a friend. I am absolutely impressed by how this hitch tows. No more chucking, the airbag and shocks add a much needed level of comfort. My camper is a Starcrart AR-One Maxx 26BHS. I’m towing with a 2005 Ram 3500 4x4 CCSB. I am using the B&W offset hitch ball to create more space between the truck cab and camper bulkhead. Highly recommend this hitch to anyone looking to tow their 5’er with a gooseneck ball hitch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Looks great well built but holes for adjusting are to small for my application.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

THIS IS THE THIRD FIFTH WHEEL HITCH THAT I HAVE HAD SINCE 2016. IT IS HANDS DOWN THE BEST HITCH I HAVE HAD AND SEE NO OTHER REASONS TO MAKE ANY FURTHER HITCH CHANGES IN THE FUTURE. THE REASON I GAVE IT 4 STARS IS BECAUSE OF THE LIST OF IMPROVEMENTS THAT I HAVE LISTED BELOW. I HAVE HAD THE HITCH FOR 1 YEAR AND HAVE PUT APPROXIMATELY 10,000 MILES ON IT. WHAT I LIKE: -IMPROVED THE TOWING EXPERIENCE IN TERMS OF RIDE COMFORT WHEN TOWING -UPON DISCONNECTING FROM THE CAMPER, THE ONLY THING LEFT IN THE BED OF THE TRUCK IS THE GOOSE BALL. -REDUCED CHUCKING. IT ELIMINATES ABOUT 90% WHAT NEEDS TO BE IMPROVED: -THE COUPLER ON THE KING PIN NEEDS TO HAVE A FUNNEL (similar to the Anderson hitch) THIS PROVIDES A MARGIN OF ERROR WHEN RECONNECTING THE TRUCK TO CAMPER. WITH THE CURRENT COUPLER, YOU HAVE TO BE DEAD ON WHEN RECONNECTING. A CHEAP ACCESSORY TO HELP IN THE ALIGNMENT OF KING PIN TO THE GOOSE BALL ARE TELESCOPING TENNIS BALLS. -EASIER ACCESS TO PUTTING AIR IN THE AIR BLADDER. IF I KNOW THAT I NEED TO PUT AIR IN THE BLADDER, I WILL DO IT WHILE THE CAMPER IS DISCONNECTED FROM THE TRUCK. I FOUND IT EASIER TO LET AIR OUT THEN TO PUT AIR IN WHEN THE KING PIN IS CONNECTED TO THE GOOSE BALL THERE ARE SOME GOOD VIDEOS ON THE INTERNET THAT HAVE GOOD TIPS AND TRICKS THAT MAKE USING THE REESE GOOSE NECK EASIER. THIS IS ONE OF THE BETTER ONES.

The goosebox is a gamechanger. Easy hookup, no bulky hitch and smooth ride. This completely changed the towing experience of my 5th wheel.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

This hitch reduced chucking very well, I have a 2004 3500 Dodge Ram 4x4 Conestoga riding truck with very stiff suspension, the torsion action of the hitch definitely helps when crossing bridges and pot holes. The 5th wheel is an older Keystone Copper Canyon that is in great shape. I Have 12K miles with the new hitch.

Click to Enlarge

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

The Gen-Y gooseneck has been excellent! I now have approximately 12k miles on mine and it rides very nicely with very limited chucking and handles rough roads very well. I’d highly recommend that you contact Gen-Y BEFORE ordering to ensure you get the correct load rating product. Gen-Y and Etrailer have provided excellent customer and tech support! This product definitely frees up your truck bed and does require a precise line up to hitch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

This product is a chucking ENHANCER, not a chucking dampener. Additionally, despite what you have read, my experience with GenY customer service has been terrible. GenY will not support their warranty program, they will try to tell you everything is OK, when the fact is, their product is faulty and does not function to GenY product literature statements “Built-In Suspension Creates Up to 90% Smoother Ride”. I purchased the GenY executive hitch from eTrailer on 3/10/23, etrailer sent the wrong unit and to etrailer’s credit - they quickly took responsibility and replaced with the correct unit on 3/24/23. I installed on my DRV Elite Suites PS3 just in time to attend the SOITC rally at the Outer Banks on 4/13/23. When we left for this 750-mile one-way trip, the GenY load indicator was in the middle of the green zone, I measured the pin load at 5,200 pounds. Bedrail clearance was my reason for buying the GenY, it replaced a Trail Air on my DRV and a Reese 27,000-pound hitch on my 2022 F450. Bottom line, the GenY system provided no improvement in bedrail clearance, but did offer the ability to switch in different gooseneck balls to adjust for bedrail clearance. GenY states that a 1,000-mile break in period is required before the GenY torsion system is fully effective. My experience was that at 750 miles the torsion system on the GenY had sagged to it lowest point with the load indicator in the unit outside of the green, this also resulted in losing nearly two inches of bedrail clearance. It looks like it has a metal-to-metal stop so that the lowest the indicator will go is to the white lines outside of the green. I called GenY from the RV park and was told that the unit would not sag further. I purchased a Curt gooseneck ball which was 2 inches higher than the Ford ball to regain bedrail clearance having to rapid ship it to the RV park. Chucking became downright scary on the 750-trip home. As an example, chucking was induced every time my truck’s ten-speed transmission shifted up. Upon arrival home, I again contacted GenY customer service with a full expectation that GenY would replace the unit. Instead, here is their response: “I spoke with our QC Manager regarding your hitch. He said that you are in the correct unit and being at the top end of the green is normal after the break-in miles. As for the bedrail clearance he said that you would be able to lower the pin box down a set of bolts (with our pin boxes you are only required a minimum of 4 grade eight bolts per side) or use a B&W ball as they are roughly 1 1/2” taller.” This is unacceptable...

Click to Enlarge

Click to Enlarge

Installation was a breeze. I have not towed with it yet, but am sure it will perform as expected.

Hitch is great. Delivery went well. My only issue is I was able to find it for roughly $xxx cheaper on [online]. When I reached out to customer support to let them know, they told me it was too late to cancel the order and if I’d like, I can return it for a $xxxx shipping fee…

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

I have towed now for a few thousand miles since changing to this pin box and honestly wish I had done this years ago! It tows so much better than my 5th wheel box did! Feels more stable, no more bucking and so much softer and better feel when towing! Not to mention so much less hassle dealing with a 5th wheel hitch!

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for