Best 1998 Volvo V70 Trailer Wirings

Used this with a 2004 Volvo that has european wiring harness. Plugged right in and the lights, brakes, and turn signal all worked as needed. Plugged right in without any hassle, and half the price of a similar adapter found on eBay. Only concern is the all plastic material makes it easier to damage.

It worked on my Volvo v70 Oem harness. I was able to use this and the indicator lights for a trailer even worked on the instrument cluster for when a trailer was connected.

Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).

I installed the pigtail on the fitfthwheel today along with the connector into the bed of the pick-up. I found the colors matched exactly on the fifthwheel and was fairly easy to install. I then installed the connector into the bed of the pick-up and found the assembly fit easily into the left rear quarter panel of the 2015 Chevrolet 3500. The wire colors were totally off from the truck wiring so a test light was needed to identify the location of each wire. Once this was completed the install was simply cutting and crimping wires. After the install of approx 2 hours ( I went slow to assure it was correct) I tested the circuits and found that all worked correctly. Looking forward to pulling and seeing how it functions.

I replaced the standard 7-pin connector with the EZ Connector on my 5th wheel because I had problems with the trailer brake connection to my truck. This magnetic connector solved my issue and works so much better. No more time spent trying to fix a corroded connection, as this works every time. It's well worth the money!

Works great. My 2022 Escape TT has a pinbox so I removed the old 7 pin plug and cable and used it to cut each wire on the EZ Connector plug to the same length. Then I just matched the location for each wire with the assistance of a cell phone image. The two photos are before and after.

Click to Enlarge

Click to Enlarge

I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you,

Click to Enlarge

Click to Enlarge

Click to Enlarge

This should work great, installation is still on my to do list.

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.

Click to Enlarge

Product won't work correctly. I've tried it with 2 different trucks and 3 different trailers. Each Turn signal will active the hazard lights, and no tail lights. When pressing brake lights, all side marker lights will light up.

Well made is all I can say about this adapter only because I used it once it worked out great but have not had a need to use it again. I keep it with my other towing plug adapters as I'm sure I will need to use it again someday!

Product is high quality & works great! Can't beat etrailer

Not using on a trailer, but making disconnect harness for quick attach snowblower to loader arm. Connection cord is 7 pin tractor trailer tether, Worked well.

Click to Enlarge

Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.

Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.

Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.

Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.

Sooo, bought another one to match my truck side connection as GM uses Pollak, which are known to not play well with other brands. The design is just a wire clamp to wire it, which I did with the first one, but trying to get it secured I stripped out the screw. There are no torque specs provided. I’ll move to crimped ring terminals on this one and dial back the torque a bit.

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Click to Enlarge

Click to Enlarge

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

Great product no issues at all. Product as described & fit properly.

Pretty straight forward. I used it to switch my European trailer's connection to be able to connect to my Wrangler's 4-pin trailer hookup. No issues. works great.

Nice product. Appears Heavy Duty. Doesn't seem cheap. Would recommend this product.

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years

Click to Enlarge

Click to Enlarge