# 1
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This hooked right in with the rest of the system. One of the easiest parts of the install.
# 2
Adapter 4-Pole to 7-Pole and 4-Pole
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).
# 3
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Couldn't get things working on my Jeep XJ. Ordered this set up and everything worked.
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
# 4
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
# 5
Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter
This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.
II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.
# 6
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
Replaced the wiring and lights on my 1992 boat trailer. I was able to get everything needed from etrailer. I think Optronics is of the highest quality and recommend both etrailer and Optronics product.
Works very well after re-wiring trailer lights with waterproof distribution box.
# 7
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style - 12" Long
This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.
Exactly as described and what I needed. Delivered quickly.
# 8
Trailer End Connector - 4-Flat - Coiled
GREAT ACCURATE REPLACEMENT WIRING.
Timely shipment. I’ve bought from your company before and haven’t been disappointed. Nice job.
# 9
48" Long 4-Pole Loop with Cover
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
# 10
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
Wiring worked perfect for my project. I replaced the wiring on my 14 foot utility trailer. If I was to do it again I would buy the next length up. I would have liked to have a little extra wiring if I was to ever need it.
Your sales staff is second to none. Keep up the good work. You shipped minutes after I placed my order! Very impressed! Marty
# 11
Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.
Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.
# 12
Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.
Needed a longer connector for my vehicles. Both have 7 way plugs, but I use a trailer with a 4 flat plug. The coiled adapter works great for both of the vehicles. Very good product if you need some extra length and the fact that it has the coils makes for a better appearance.
# 13
Epicord 7-Way Molded Trailer Plug - 8' Long
Fast shipping and looks to be just what I was needing. Thanks
Promising product with the terrible customer service. Order arrived damaged so the customer service initially promised the full replacement which never happened. After the delayed communication the customer service decided to process it under the warranty claim which never happened. Never recommend to do business with this company again.
# 14
Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat
Great build quality, but unfortunately it will not work to legally use a 4-pin trailer being towed by a 7-pin Euro/Land Rover plug. Its simply mapping 4 of the 7 pins to the following pins on the 4-pin side. Left running, Right running, Stop and negative, there is no provision for indicators or dual sided brake lights. It needs diodes (which it does not have) to do this. etrailer just needs to update the description as this is a good basis to make various adapters.
Received product in good order, well packaged, initial some delay, manufacturer was chased by etrailer, and earlier dispatched by manufacturer; delivery trail clear stated, very good. On receiving verified at UHAUL: connect with 1983 Land Rover (Defender) 110 Stationwagon (photo: rear, while on transport): all functioned ok. Apparently some diode(s) included, as the 7 pin has individual stop light which translates as left AND right indicator on flat pin. Emergency flashing (all indicators left and right) tested ok at UHAUL (connecting to trailer). LR has European homologated 3.5 metric Ton (7700 lbs) tow hook and has done some 60,000+ miles towing with current odometer reading 578,000+ km (on/about 360k miles)
# 15
Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!
# 16
Adapter 7 Pole to 4 Pole with Flex-Coil Wire and Nite-Glow (TM)
Cathy T was a FANTASTIC help in finding the exact right product that we needed!!! It's sometimes difficult to understand what we need because what we may call an "extension cable," may actually be labeled as a "wiring adapter" or "trailer connector." She was very patient and thorough as she found us the precise product for us. She was also knowledgeable about Jayco trailers, knowing their uniqueness, which also helped her in finding us the right product. And this product is absolutely the exact item we needed!! We luv it cuz it's easily visible for us, as well as law enforcement on the road!! Thank you for your expertise and great selection which provided us with what we need!!
makes for a faster hook-up from Truck to trailer. What is outstanding is the plug lights, when connection is made.
# 17
fits the plug perfect....just got a goldwing used, haven't had a chance to ensure it (the bike) was wired correctly for a trailer. no fault of the product, just wish its wireing was a bit long due to the way the plug was intigrated into the underside of the tour trunk.
Works great! Took a few minutes to figure out the rv side and get it set up so the round RV part Correlated in the correct way to the standard four flat wiring. But it went smoothly.
# 18
7-Way Molded Connector w/ 10' Cable - Trailer End
I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.
The overall quality of the cable is impressive
# 19
6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends)
Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.
This is a product that I needed for my project, but was not easily found and available. etrailer.com not only had the product, but had it at a great price. Shipping was very fast and free for the amount I ordered. Overall, this was a great shopping experience. I made a bulk order of 16 as I am manufacturing trailers that are towed behind motorcycles. This product gives me the six conductors that I need in a very small package, which is great due to the size of motorcycles compared to cars or trucks. The only thing that could be improved with this product would be if they came with dust caps for each connector, or at least one for the vehicle side to prevent dust and moisture intrusion while the trailer is not in use. Keep up the excellent service and selection.
What our customers are saying:
"i ordered on a tuesday and recieved my order on wednesday. very fast service and much cheaper than local auto parts stores"