Most Popular CIPA for 1995 Ford Van

The first one fell off within 2 miles. The second made it about 20. Save you money and upgrade the mirrors themselves.

piece of cake for this 70 year old young woman to install!!!

I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.

Click to Enlarge

Pros: Very easy to install. Will fit on almost anything. Cons: Bit of a challenge to adjust the in/out tilt on fixed mirror housings. Would like a little more height, but it's OK. This is a good solution for the casual user like me. Installation is painless. If you need more control over height or tilt, this is not for you.

Click to Enlarge

The mirror I purchased from you far exceeded my expectations. It appears to be better quality than the original equipment. The price was right and the shipping was fair and fast. I look forward to dealing with you in the future.

These fit no where near factory locations on a OBS Ford, definitely not “replacement”. They are flimsy as well. Waste of $150

Unhappy with the way this mirror mounts to our 2003 Ford van. It will not stay tight. Many hours of pulling over,and ajusting. I belive e-trailer should suggest a different alturnative to the CTM2500 custom mirror. I will be returning them this week, Thankyou,Gil Ruehmeier

Not a good mirror. Second time using it fell off my car and smashed in road. Thank goodness it did not hit another car. The foam pads slid off and you can not get a good grip. I returned and they are sending me same one, because it was after 30 days.

Good mirrors for towing 28 ft travel trailer... Only got 3 star as first trip went we went to leave on thursday 5-25 for our first trip and went to put on and the passanger mirror was missing the screw to hold it on so i had to zip tie it on...on tuesday i will be calling to see about getting a replacement screw for next trip and will see how customer service is...

Click to Enlarge

The towing mirrors are an exact fit. I was going to only use them when I towed my trailer but decided to keep them on permanently. They look Really good.

They are ok for what they are. Easy to install and remove. They do not show as much as I thought but enough since I dont have factory tow mirrors.

I ordered these mirrors for my car in Oct 2021 at which time the website indicated they would fit my car. I only need them for towing during the summer so did not even open the boxes until this week, April 2022. Imagine my surprise to find out that the mirrors do NOT fit my car. I immediately sent an e-mail requesting process to return and exchange for mirrors that would fit. Today I received a response stating sorry they don't fit but our returns policy is 60 days and I was outside of that time. I should try selling them locally! I could understand if the mirrors were no longer carried by etrailer but they are still in stock. And I'm not asking for a refund but an exchange. Very disappointed in this company!

The mirrors fit my 1997 Ford F250 HD perfectly. The threaded clips and threaded nob are cheap. The plastic threads that tighten the mirror to the vehicle are easily damaged. Mirrors would be better if the clips were made better. Giving 4 stars based on the flimsy clips.

Click to Enlarge

The concept is great, however the connection to the mirror has a plastic screw, not the ones shown here in the picture which look to be metal. I have not even used the mirrors and first time removing them, the plastic screw (why??) breaks.

We haven't used them yet while driving the RV, but the fit is perfect! Very happy with these extenders

Really loved my cipa mirrors on my Chevy. The dodge mirrors are tight if you use the right thickness wedge. Problem I have is that if your backing up and want to pan the factory mirror down for rocks or stumps the overhanging lip of the cipa mirror stopes the factory mirror. Will have to grind some off that lip for factory mirrors tilt up or down to clear for the tilt of factory mirror.

Click to Enlarge

I'm so impressed at the quality of these mirrors (I bought both driver and passenger sides) especially at such a reasonable cost. Very simple but effective solution for me. It took about 3 minutes to install these as they fit and slide right over my existing mirrors. They were designed precisely for my vehicle so don't interfere with my power adjustments or signal lights. I'm new at pulling a large Camping trailer and needed to find something to get my field of view around both sides. Factory mirrors and such were too expensive for my budget and I don't believe they would help anymore than these.

Fits nicely over my existing mirrors and is extremely easy to install. They look great and are blend in with the existing mirror so that they look natural.

I would like it to be extendable a bit further on the passenger side. The driver's side is fine though. The passenger side does not let one see far enough away from the side of the trailer. All in all, I like it better than drilling holes into the doors of my pickup to install huge mirrors. These look way better and are sufficient.

Click to Enlarge

Not long after putting on the truck, the mirror fell off

I've run these mirrors a few thousand km now, they work great. They don't vibrate much, and go on and off easily. No complaints, I would recommend these if you don't want to bolt big extendable tow mirrors on your 90's chevy

Installation was very easy and secure. On test run there was no vibration angles remain constant for easy rearview examination

Click to Enlarge

So-so construction and design. With one modification they're more than acceptable. The arms and straps will slip and loosen if installed on triangular or tapered housings. Mirrors that have backs nearly parallel to the mirror face, and have upper and lower mirror edges that are nearly parallel are not affected. Adding a peel and stick plastic wall hanger to a tapered housing will stop the strap from slipping and loosening. The ball and socket mount is good and tight, but the stud on the ball is loose in the arm. I think most of the jitter and vibration others report is from this sloppy clearance that the stud screw can't tighten enough. I'll be addressing that as well. A nice option for those of us that a) don't tow a majority of the time and don't want full time extended mirrors, and/or b) tow with multiple vehicles and prefer to have adjustability to fit our 'fleet'.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I ordered these for a 2023 Tundra after being advised to do so. The straps seem to be too short and to get them attached I'm really stretching then out and they're difficult to mount. I'm concerned they're going to pull off with so much tension and very little strap left threading through the tensioner.

Unhappy with the way this mirror mounts to our 2003 Ford van. It will not stay tight. Many hours of pulling over,and ajusting. I belive e-trailer should suggest a different alturnative to the CTM2500 custom mirror. I will be returning them this week, Thankyou,Gil Ruehmeier

I bought these mirrors to use on our 2021 Jeep Grand Cherokee. I used them just a couple of times and have decided to look for something else. Despite my best efforts and watching (and re-watching) the online video that shows them being mounted on my exact vehicle, I found that the soft pads that grip the back of the mirror could not keep the mirror in place for more than 30 minutes or so. It was warm (mid-80s) when I used the mirrors and the heat seemed to let the pads slip too much. I tried several different positions and adjusted the tension straps carefully, but no luck. They seem pretty well made and may well work well on other vehicles, but they just don't work with my Jeep GC.