# 1
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
My manufactured trailer did not have this type with a grease fitting. They wore out the bushing in no time. I really like the design and ability to lubricate the bushing.
About a year ago, I replaced my leaf springs, dry shackles with wet shackles, upgraded the bushings to brass, and I also installed sumo springs on the trailer,the trailer is very stable on the road, neither wind or semi trucks push the trailer, not that they ever really did but these sumo Springs made it much better. All the plates and things that were loose in the trailer no longer bounce around and are found on the floor at the end of a trip.
# 2
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Just what i needed since my original equalizers were completely worn out .
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
# 3
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.
# 4
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 5
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!
# 6
U-Bolt Plate for 2" Square Axle - 1-3/4", 2" Springs - 9/16" Bolts
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 7
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
Nice quality and length to replace on tent trailer square axle u bolt
I looked all over for a u-bolt to replace one that broke on my 70's era horse trailer. I was about to give up when I found an exact match on etrailer.com. These shipped fast, were packaged well, and are just what I needed!
# 8
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
I purchased this kit for the standard 5' x 8' 2,000 lb. trailer from Lowes. I did an axle flip and added larger tires. This is the perfect kit for this trailer. It went on easy, and the bolts were slightly longer. Also the bolts in this kit were fine thread instead of course thread. Overall an improvemet over the factory hardware and I had no issues. Shipped in a timely manner and packaged well. I highly recommend this kit if you plan on flipping the axle or need a replacement.
Moved my axle below the leaf springs, works a lot better for my needs now. Paul helped me put an order together, got it shipped that day and delivered two days later. Quality parts and outstanding customer service.
# 9
U-Bolt Plate for 1-1/2" Square Trailer Axles with 1-3/4" Wide Springs
I purchased this plate to upgrade the suspension on my trailer. I would get a a lot of trailer sway when I was towing my jet ski trailer. I bought the trailer used and never really looked at the springs. Unfortunately for me, There was nothing but one U bolt strapped diagonally across the spring. I'm no suspension expert but I knew this could NOT be safe. I did extensive research on trailer suspension. It was difficult to find parts for a 11/2 inch square axle. It was until I came across etrailer webpage. They had everything I required to upgrade and make my trailer safe to operate on the road. It was actually criminal what the person did to attach the original spring. I am greatful nothing ever happened while towing. Now with the new parts installed, I feel a lot better and my trailer does not sway anymore. I will definitely purchase my trailer needs from etrailer from now on. The pictures and videos make finding what I needed so much easier. The complete transaction from order to delivery was extremely efficient and the customer service is absolutely outstanding!
Good quality product would purchase again
# 10
Replacement Shackle Strap - 2-5/8" Long
Easy installation holding up well.
Worked perfect.
# 11
U-Bolt Plate - 2" Wide, Square Trailer Axle - 1-3/4" Wide Spring - 9/16" Bolts
Have started replacement, delay due to health, after removing old suspension on one side discovered that the U Bolts and the base plates do not align, the holes and bolt widths are off,no possible use. Compared the old plates to the new which showed the irregular hole pattern. The bolts do not work with the old plates either. So I'm just using the old hardware.
Fit perfectly heavy duty don't think I will have any issues with these
# 12
Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
Worked and fit perfect. Thanks
Quick delivery and excellent customer service (with follow-up emails to ensure that everything was ok with the order). This replaced a broken bolt on a 1956 camper trailer, and it's a very close match to the original.
# 13
I replaced the equalizers, shackles, bushings, bolts, and nuts on an old trailer. Everything fit properly without modification. Product quality was excellent.
Great straps, fit as expected. After one year, they are holding up great.
# 14
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
# 15
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 7,000 lbs
I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.
Happy with the online ordering.
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."