The head design for the Draw-Tite (and now Reese) weight distribution system has changed over the years, so your existing round spring bars won't be compatible with the current style head (which would be the Reese part # RP58112). The original head to match what you currently have is no longer made.
This means your only option will be to upgrade to an entirely new weight distribution system. If you can tell me the capacity of your existing system, or the loaded weight of your trailer,... view full answer...
The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for black or part # MA10A40002K for white. view full answer...
The only replacement part we have available for the original Blue Ox Patriot (BRK2012) is the Replacement Brake Claw # BRK2512. Unfortunately, this system was discontinued in 2017 and there are no other replacement parts available any longer. You may be able to find a replacement on the second hand market, but that will entail a lot of searching and patience.
The best option we have is to upgrade to the newest iteration of Patriot, the # BLU37TR. This is quite a bit more compact than the... view full answer...
You will need either the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles # 8-259-50UC1 for 8-12" wheels or the Assembly # 8-258-50UC1 for 13-15" wheels. Both these hubs use the 1-1//16" Bearing # L44649 for inner and outer bearings. And they use a Grease Seal # 10-9 (1.50" inner diameter). view full answer...
Without knowing what slide topper you have, I cannot say with 100% certainty what assembly you need. The odds are good that you have a Solera slide topper and the correct option for the right side would be the Replacement Right-Side Head and Roll Bar # LC34FR which fits all Solera RV slide-out awnings.
The # LC87FR you mentioned is for the left side and the # LC79WD is for the Lippert Solera 5000 Series slide topper specifically. view full answer...
Based on the information you have given me you have the Roadmaster Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035 or # RM-035-1.
Since you want to stick with Roadmaster parts, the correct replacement pin is the Replacement Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters - Qty 1 # RM-910044. This hitch pin is the direct replacement part for the pin that came with the # RM-035 and # RM-035-1. The adapter is designed to fit D tabs... view full answer...
Both your axles will use the same Grease Seal # 58846. I am going to list all the common replacement parts for each axle so that you have that information.
4,400lb Axle
Inner Bearing # L68149
Outer Bearing # LM67048
Inner Race # L68111
Outer Race # LM67010
Grease Seal # 58846
Brake Assemblies # K23-462-463-00
3,500lb Axle
Inner Bearing # L68149
Outer Bearing # L44649
Inner Race # L68111
Outer Race # L44610
Grease Seal # 58846
Brake Assemblies # 23-468-469 view full answer...
Correct, the breakaway for the Blue Ox Patriot Supplemental Braking Systems is unique. For replacement, you'll need the Breakaway Kit for Blue Ox Patriot Supplemental Braking Systems part # BRK2505 which comes with the cable, box, plunger, and lanyard. This is the only way it's offered so it may have some stuff you don't need. view full answer...
To replace your Blue Ox Ascent Non-Binding Tow Bar # BX4370 you can either use the exact same bar, or what I recommend doing is actually using our etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR.
This has adapters on the ends of the arms to fit with the Blue Ox base plate kit on your 2016 Jeep Wrangler, and I actually like the operation of our tow bar better than the Blue Ox anyways so I know you'll be happy with how it performs.
Attached is a review video of our tow bar... view full answer...
You are correct that Thule now owns TracRac, but that doesn't mean that you're out of luck when it comes to parts! Although they'll look different than the ones that you currently have, Thule tells me that you can use the Replacement Modular Clamp for TracRac G2 and TracONE Truck Bed Ladder Racks # PT-27064 to replace the old 01-22913 clamps that came on your TracRac 22940. These are sold as single clamps, so you would need to purchase 8 of them to get all of the clamps you need to re-mount... view full answer...
Vent lids are actually very universal so since you have the standard vent measurements and a continuous hinge you can definitely use either part # BV0554-01 or part # BV0534-00 depending on which style you like better.
I have attached installation videos for both lids that you can check out. view full answer...
It appears your 2021 Forest River Cherokee Wolf Pup 16FQ will have came with a Lippert door. We do have the Replacement Controlled Motion Hinge # LC95VR which may fit your door. To determine if this is a match for your door you will need to confirm you do have a Lippert door with hinges using the same 6 leaf design. Otherwise I would need to see the door manufacturer tag to verify if we carry the correct replacement hinges for your door. This tag is generally found inside the door on the... view full answer...
I'm assuming you're speaking of the 3/4 inch bolt and nut that joins the yoke to the stinger assembly, which are items # 14 and # 15 as shown in the provided diagram. If that's what you're speaking of, then yes we do offer that nut and bolt. The bolt is part # RM-350184-50, and the nut is part # RM-350267-01. If you also need the nylon washers, they're available individually as part # RM350358-00.
If you're speaking of the 3/4 inch bolt that joins the arm assemblies to the yoke which is... view full answer...
The correct replacement controller for the Lippert Coach Steps is the Replacement Control Module for Lippert Electric Coach Step part # LC301702. view full answer...
You will need to replace your AOM713WP monitor with a Voyager RV LCD Observation Monitor # VO34FR. Voyager no longer produces the junction box that you are needing. The new monitor removes the need for the junction box and uses the same 4pin camera connection that you have with your current cameras. You will need to wire in the trigger wires that control each camera activation. view full answer...
You definitely do not want to use the # e77SR on your trailer with a 3,500 lb axle. These are rated for a 2,000 lb axle which is well under your capacity. If you need a 26" leaf spring I would not get the # e54SR since they're a bit too short. You're better off getting the # e22YR. This is rated slightly higher at 4,000 lbs but that won't be an issue for the trailer and will likely allow them to last a bit longer. These measure 26" which is what you were looking for. view full answer...
It actually looks like the ladder you currently have is exactly what you're already looking for - you just need to remove the screws from those bottom supports and then you can flip the ladder up since it's hinged higher up. If that isn't working then what you can do is remove your current ladder and then use a fold-up ladder like the Telesteps # TE74FR which can then be stored in your motorhome. view full answer...
Replacement # 915-0880-11 is a mounting bolt that can be used to attach the side knob # 753-0737-10. For a matching M8 nut use # 938080054. For an M8 washer use # 951081654.
What I recommend is to liberally apply spray lubricant such as PB Blaster or WD40 and let the rusted hardware soak for about 15 minutes. If the hardware will not come up spray more and let it soak again for about another 15 minutes. If you do this several times and it doesn't work then drilling out the hardware would... view full answer...
Go To Results