Hi Jesse; the only reason I can really think of is your bolt pattern. If you have a 1621 bolt pattern there is no reason why you wouldn't be able to use the lower rated Curt Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000 lbs # LC328492 you were looking at. If you have something like a Lippert Rhino the 21k # LC65VR is the only capacity available. The higher capacity will be fine, pin boxes are usually over by quite a bit anyway, but if there is a lower capacity option that can handle... view full answer...
Hey Jarvis, the Lippert Tailgate Storage System # LC404069 would install using either the Lippert Tailgate Storage System Mounting Kit # LC432223 or # LC432336 using the included brackets and hardware.
To answer your second question, the tailgate storage system # LC432223 would install under the bumper and # LC432336 would install over the bumper. view full answer...
Hey Rick! If you aren't concerned about the appearance of the wheel since it is a spare you can use the Karrier # AM32545 (if you have a 5 on 4-1/2 bolt pattern) or the # KE64WV (if you have a 6 on 5-1/2 bolt pattern). If you just want the wheel the # AM20545 (5 on 4-1/2) or # DEX49FR (6 on 5-1/2) will also work.
If you're trying to match your current wheels, or find something similar, I would be happy to see what we have if you can send me a picture of the wheels on your trailer. view full answer...
Hi Reeve,
In order to find the correct replacement plug I'd need a bit more information on your wheel. Can you send me a picture of one of the other wheels so I can see the design, the tire size code on the sidewall of the tire, the diameter of the pilot hole for the wheel, and the bolt pattern of the wheel? view full answer...
Hey Donny, welcome back! The # ASR1200S04 uses a 3,500 lb axle bearing combination so for oil bath disc brakes you can use the Kodiak # KOD77FR. Then for the 7k # TASR7KS02 you can use the Kodiak # KOD33FR. Let me know if you need anything else. view full answer...
Hey Wayne, to replace your WF-9865 converter you have I recommend the Progressive Dynamics 9300 Series RV Converter Charger # PD79RR. This converter is compatible with lead acid, AGM, and LiFePO4 batteries and has a 60 amp converter rating. It installs the same way so this will be an easy swap out of your current converter that won't require any additional changes. view full answer...
Hey Dave, welcome back! The Furrion Vision S+ Wireless RV Observation System # FR74AD you looked at is the one I recommend. This is the latest camera from Furrion and includes marker light cameras. The camera monitor lets you watch 3 angles at once so you also get a nice, clear view out on the road. If you want something less extensive that only includes the backup camera then the # FR57AD is also available.
Do you have any big trips planned with your 5th wheel this summer? view full answer...
Hey Suzette. I wasn't able to get any information off of that part number. If you could get me some dimensions off of that light I can look and see if we have a comparable replacement.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them. view full answer...
Hey Michael! Ladder racks like the Stromberg Carlson RV Exterior Ladder # LA-401 are a universal fit. This measures 99-1/2 tall x 12" wide and has trimmable legs so you can size it perfectly on your Highland Ridge Olympia Sport 19BH. If you need anything else don't hesitate to reach out in the comments below. view full answer...
Hey Michael,
The Ultra Breeze # DMC38FR would be the correct fit for a Dometic/Fan-Tastic Vent RV roof vent. It has slots that would allow mounting points through to clip the vent cover on. It also comes with mounting brackets that would just reuse the mounting screws that hold the vent to the roof if you don't have the correct attachment points. I am curious to see the nodules you referenced though. If you want to email me separately I can take a look. view full answer...
Unfortunately, you cannot use the Correct Track # RR23QX on your 2020 Highland Mesa Ridge 5th wheel since you have the tapered spring hangers. While we do not have any kind of lift kit or correct track for your campers tapered hangers you could have the hangers trimmed to fit the kit but I would recommend adding some additional bracing with Crossmembers # MR33WR to provide support to the hangers they will be losing with the removal of the material from the hanger size. view full answer...
Hey Rob,
The BD2-545-17 has been phased out, so you would need to buy the entire hub with new bearings # AKHD-545-35-EZ-K. The reason for this is you should not be using used bearings in new races which are preinstalled in all hubs, as a used bearing has actually worn into the original race and is no longer the same size as when it was new. Using a used bearing in a new race can cause bearing failure in some cases due to this. view full answer...
Hello William. The Curt Channel Style Adjustable Ball Mount # C45900 is designed to work with any 2" hitch receiver. This is the standard size for a hitch, so it is highly common. A small amount of play is not unheard of, but there are ways to help minimize this. The best way is to use an anti-rattle device. Take a look at the Blue Ox Hitch Receiver Immobilizer # BX88224 this uses two U-bolts which tighten around the shank of the ball mount. This one is designed with 2 U-bolts so it will... view full answer...
Go To Results