The correct replacement suction cup mounting bracket for your Voyager WVOS713 monitor is the part # PVOS7SCM. The bracket on this unit is designed specifically for the larger 7" monitor on your system.
The Replacement Mount # PVOS5SCM that you referenced is for the smaller 5" monitors so it won't work well to secure the larger size. view full answer...
I called my contact at Yakima and they informed me that they currently do not make nor stock replacement parts for the Rhode Gear 4 Bike Hitch Shuttle anymore. However, I suggest trying the Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models part # Y8820103 as these are very similar to your current support straps and according to the Yakima representative, should work for you. I would also agree with this statement as they do look very similar though, but since they have... view full answer...
If you are looking for replacement parts for your Thule Spare Me, part # TH963PRO, we have them here. I don't know exactly which parts you need, so below is a list of parts:
Replacement Washer - part # 951081654
Replacement Carriage Bolt - part # 915-0655-11
Replacement Mounting Carriage Bolt - # 915-0880-11
Replacement Long Mounting Bracket - part # 752-1425-002
If these are not the parts you need, let me know and I will find what you are looking for. view full answer...
The RockyMounts MonoRail Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount, part # RKY10007, will come with the nylon lock. The premium lock only comes on the RockyMounts SplitRail and the RockyMounts BackStage. You can get the Replacement Hitch Lock Pod for RockyMounts Bike Rack, part # RKY12006, and replace the nylon lock with a premium metal lock.
I have included a product description link, a video review of the Rocky Mounts MonoRail, and a demo video of the Lock Pod below. view full answer...
The closest light I see we carry to your Luminaire 24007 is the Opti-Brite 12V LED RV Dome Light # ILL46CB. This light is 5-3/4" long and 2-3/4" wide compared to your light which is 4" x 2-1/2" from the information I could find. Our light is also LED so it will use less power and you will not have to worry about the bulb burning out like you likely have experienced with your current light. view full answer...
From my research the Bell Hitchbiker 450 is basically the Swagman Trailhead 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting # S63380 with a couple custom features. For the hitch pin, I recommend using the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 as the threaded pin and clip are not a replacement part available. view full answer...
We have the Easy Grease Trailer Idler Hub Assembly # AKIHUB-440-2-EZ-1K which should fit your Harbor Freight trailer. This idler hub includes bearings for a 1" spindle which is 25.4mm. It has a 4 on 4" bolt pattern. You can verify this is the correct dimensions for your trailer to verify it is the correct hub. This hub does also include a grease seal with 1.249" inside diameter grease seal. If you have a different size grease seal please let me know and I can determine if there is a different... view full answer...
For your older Thule Summit Cargo Box, the correct mounting hardware kit is the QM3 Quick Mount Hardware # TH04997. This kit includes all of the needed mounting hardware to attach the Thule Summit to the crossbars on your vehicle's roof.
We do have a few of the parts available as separate items:
Quick On/Off Bracket # TH04973
Protector Pad # TH05001
Box Plate use # TH04998 which is a steel plate with black paint for corrosion resistance
Carriage Bolt # TH10403 is yellow zinc plated steel... view full answer...
We have what you are looking for here!
The Thule 91725U Snowsport Ski and Snowboard Carrier has a replacement wrench available. It's the Replacement Tamperproof Wrench for Thule Ride-On Adapter, Bed-Rider, Flat Top, or Snowboard Carrier, part # 853-5270-02. view full answer...
Thank you for all the info!
To replace the 2824 key for your Sears X-Cargo Sport Cargo Box you just need the Replacement Key # THKEYN2824. Thule is who made/makes the Sears cargo boxes.
This does just come with 1 key so you might want to order a couple so you can have a spare on hand. view full answer...
I was not able to reference the grease seal "5013/29772". We may still have a replacement for you but I would need you to measure either the inner diameter (I.D.) and outer diameter (O.D.) of the grease seal or the part of the spindle where the grease seal sits and the inner diameter of the hub where the grease seal is located. These measurements will need to be taken with a digital caliper to the nearest thousandth of an inch.
Once you find these measurements, I would be happy to see... view full answer...
Trailer makers don't usually keep track of the brand/model of lights used in trailer production and the numbers you took from your light's broken lens are not part numbers, but rather DOT coding. The light's base is likely to have the part number printed on it so you can check there for a brand and/or part reference. Once you find that you can type it into our search box.
If you cannot find that information you can still review the replacement light lenses we offer which are shown on the... view full answer...
Curt trailer hitch # C13200 uses six M12-1.25 x 35mm grade 5 hex bolts and six 1/2 inch conical tooth washers. If you bought the hitch from us then the hardware should have been taped up around the receiver or stuffed inside the receiver. If it was missing then give us a call!
Otherwise we can get you the proper hardware if you order # RHK. Put in the hitch number and choose Curt as the manufacturer to get the right kit. view full answer...
Don't worry about not having the old mounting hardware for your hitch; you cannot re-use it anyway since hitch mounting hardware can be torqued to spec only one time. After that it must be replaced with new hardware.
We offer kit # RHK, which is a replacement hardware kit for every hitch we sell.
Both aftermarket hitches made for your 2005 Toyota Highlander, Curt # 13530 and Draw-Tite # 75153 are shown on the linked page. Take a look at your hitch's safety sticker to find its part number... view full answer...
You'll need (6) M10 - 1.25 x 30 Class 10.9 hex bolts and (6) 3/8 inch conical toothed washers.
We offer them in the # RHK kit you'd looked at, On the product page, you'll input the hitch part number and choose the hitch manufacturer from the provided drop-down menu.
If you wish, you should be able to find the bolts locally, but the conical tooth washers are a specialty item that you'll probably not find at your local home center. We offer them as part # 01292006-020-01. view full answer...
The Lippert Components RV Entry Screen Door Latch - RH # LC201471 is the latch used in the attached installation video. If you need the opposite side for doors that swing out with hinge on the left, then you would use the Lippert Components RV Entry Screen Door Latch - LH # LC201472. If your screen door frame doesn't have the built in strike plate then you will also use the Lippert Components RV Outside Striker for Screen Door # LC198252.
These handles don't have a separate inside fit,... view full answer...
We do have the replacement round screen for your MaxxAir roof vent, like the MaxxFan # MA00-04000K. This is listed as part # MA05-30925 on our site. view full answer...
For most situations, yes. If you have a power converter/charger installed and want to replace a direct R&R in most cases it is a straight forward task. However, please keep in mind that direct replacement with minimal wiring modification required is heavily dependent on the OEM installation and, if any previous modifications have been made. I have attached a link to the installation instructions for your review.
I suggest adding the Converter Status Remote Pendant for Progressive Dynamics... view full answer...
We do offer replacement hardware for the Curt Trailer Hitch Receiver part # 13534.
Just enter part # RHK in the search box on our website. Then enter 13534 in the Hitch Item Number box. Select Curt From the dropdown box and order it. Your hardware kit will be assembled for you. It's that easy. view full answer...
We have replacement round end cap # 853-2181 for Thule bike racks that have round tube arms. It fits 1-inch diameter arms. It has the hole at the bottom for the screw to hold it to the end of the rack arm. view full answer...
Go To Results