For your 2008 Keystone Montana Big Sky Fifth Wheel I recommend the Lippert Components Venture 5th Wheel RV Landing Gear Motor part # LC142178 which is a direct fit and will work well for you. This motor has a 5,500 RPM rating and is made right here in the U.S.A.
If the legs retract/extend with the manual override but not the switch and you have checked the wiring then chances are the motor is bad and needs replaced. view full answer...
The 125340 motor that you currently have on your 2008 Montana Mountaineer 35 foot 5th Wheel is equivalent to the Replacement Motor # LG-142178. This is compatible with the Replacement Aluminum Gearbox # LG-179015 which is also what you want to use for your application. view full answer...
Unfortunately the dual filament 2057 bulb # 30-84-057 does not have an LED replacement. For that light fixture, the incandescent # 30-84-057 is your best option.
Luma LED Bulb # CM93236 is a replacement for a 1157 bulb which is a completely different size that isn't compatible with the 2057. view full answer...
I checked the Keystone website for details on your Raptor model 3912 but I could not find this model's axle specs. Since you want to choose brakes with the appropriate stopping power you'll just want to check your specs for the axles' rating or look for a sticker or plate on the axle beam that will tell you its weight rating. Chances are the axles are rated between 5200-lbs and 7000-lbs each.
Based on your photo (thank you) and the weights of Raptor trailers you most likely have 12 x 2-inch... view full answer...
It sounds like your 2008 Keystone Montana 340RL Big Sky 5th wheel has a Lippert Ground Control auto-leveling system installed, such as the 4-point setup # LC358590 or the 6-point # LC675817. If so the replacement rear leg assemblies are part # LC344792 (right rear) and # LC342610 (left rear). Motors only are not offered by Lippert.
If instead you have a Lippert rear stabilizer jack like # LC298707 there is a replacement motor unit available, part # LC138445. view full answer...
For your 2008 Keystone Fuzion 362, the replacement landing gear motor you need is the Replacement Motor for Stromberg Carlson Electric Landing Gear Set - 6,500 lbs # LG-196308. I've attached a video to assist. view full answer...
Go To Results