I spoke with Bestop, the manufacturer of the seat # B3942901 you were looking at and was able to get the dimensions you needed to see if it would fit with your Snow Cat.
The seat's width is 18-3/4 inches, length 19-1/4 inches, and the back height 18-3/4 inches.
I've linked the seat to this page for your convenience. view full answer...
You sure can Ryan. You'll need the Custom Mounting Brackets for Detail K2 Snowplows item # K284115. This will work with the Detail K2 Storm II Snowplow item # K2STOR8422.
Please note that the Custom Mounting Brackets item # K284115 will only fit the 4WD models of the 1993 Jeep Wrangler.
What region are you in and how much snow are you expecting to plow this year?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them. view full answer...
Hey Bill! The tube wall thickness of the Aries Round Nerf Bars item # AA35600 is .050". The gauge of steel is 0000000. These have been confirmed to fit the 1995 Jeep YJ. view full answer...
We do have upper door parts for Jeeps but I would need to know the year and model of your Jeep to get you the correct piece. Also, what color do you have for your bottom half of the door? view full answer...
The only difference between the Detail K2 Summit II Snowplow # K2SUMM8826 and the Detail K2 Storm II Snowplow # K2STOR8422 is the actual size of the snowplow. The Summit II is 88" Wide x 26" Tall while the Storm II is 84" Wide x 22" Tall.
If the vehicle you plan on using the plow with is the 1989 Jeep YJ you input for your vehicle info then the mounting brackets you need for either of the plows mentioned above come in the Kit # K284115. Let me know if you have a different vehicle and... view full answer...
Hey David,
If your 1994 Jeep Wrangler has the factory bumper then I recommend the Demco Classic Base Plate Kit # DM9518112 along with the etrailer SD Non-Binding Tow Bar # e34ZR to complete your physical connection between the motorhome and Wrangler. If you have a different baseplate then I'll need to know what it is in order to pick out the correct tow bar.
If you haven't picked out the rest of your flat towing components then I have the following recommendations:
Tow Bar Wiring: Roadmaster... view full answer...
Hey Shane, we don't have any adapters to go between a Ready Brute tow bar and a Roadmaster base plate kit so your best option would be to instead go with a nicer Roadmaster tow bar. The Roadmaster Falcon 2 part # RM-520 with the crossbar # 910021-00 is much nicer than the Stowmaster you have now and would fit directly to your base plate kit. Do you think that would work for you? view full answer...
Hey Danny, thanks for reaching out. It is possible to flat tow your 1994 Jeep YJ, but the tow hooks on your bumper cannot be used for flat towing since there is no way to attach a tow bar to them.
We do offer base plates for the 1994 YJ like the Demco Classic Base Plate Kit # DM9518112 but there are made to work with the standard factory bumper. If your bumper is aftermarket you will want to make sure the base plate mounting location is still accessible. As long as you still have access... view full answer...
Pretty much all hub and drum systems are compatible with both electric and hydraulic brake systems. If you can give me some photos and/or information about the axle weight rating, hub inner diameter, and brake mounting bolt pattern I'd be happy to help you find the correct replacement electric brake kit for your trailer!
Attached is a helpful article on adding electric brakes so you can familiarize yourself with the process, and then it's also worth noting that you'll likely want to swap... view full answer...
Hey Shane, the only adapter we have that can work with a Ready Brute Elite tow bar is the part # BX88297 which goes from a Ready Brute tow bar to a Blue Ox base plate kit.
The Roadmaster crossbar can't be used as an adapter for this nor do we have anything else that would work aside from swapping to a Blue Ox base plate like the part # BX1137 on your 1995 Jeep Yj. view full answer...
Hello Randy,
That is a pretty sweet Jeep you have! What color is it?
It will depend on how long your nerf bars are. The MORryde Jerry Can Mount for Jeep Wrangler TJ and YJ - Driver or Passenger Side # MR69MR installs pretty close to the front wheel well. I attached an image of how it looks when it is installed, and also where it attaches under the car, you will have to go out and see if it will work. view full answer...
Yes, it will! We've had customers with similar lifts install the Custom Mounting Brackets for Detail K2 Snowplows item # K284115 on a 1994 Jeep YJ with a similar lift.
The Detail K2 Rampage II Snowplow - 82" Wide x 19" Tall item # K2RAMP8219, you were looking at will work great with your Jeep. view full answer...
If you're going to swap out your trailer's axle you'll first need to measure the distance from center to center for the spring seats (B) and from hub face to hub face (A) to find the correct length. Then we can narrow down the selection to a 3,500lb weight capacity and choose compatible hubs.
For example if you had a hub face measurement of 89" and spring center measurement of 74" you could use part # T3584F-8974. Next you would need some hydraulic drum brakes like part # AKFBBRK-35 since... view full answer...
Yes you can use the Rampage Center Console part # RA39923 in your 1995 Jeep YJ as long as you have the space between the seats for it. The console measures 29" long x 9" wide x 14" tall. The console was designed with minivans in mind but it can be used in any vehicle that has the space.
I have attached a diagram for your reference.
We do offer smaller consoles that are confirmed to fit the 1995 Jeep YJ such as part # RA31515. I have attached a link for those as well. view full answer...
Thank you for your picture. Yes, the Detail K2 Plow part # K2RAMP8219 can be used on your 1994 Jeep YJ Wrangler with the custom bracket kit that fits your vehicle with the part # K284115. view full answer...
You are correct that the ST205/75R15 tires like the # AM1ST92 are 27.1" tall which is exactly one inch taller than the ST205/75R14 tires you currently have on your trailer.
Since the width of the tires is the exact same, as long as you currently have at least 4" from the top of the tire to the bottom of the fender you will not have any clearance issues.
To change to the ST205/75R15 tires you will also need 15" wheels, so I recommend going with a wheel and tire combination like the Karrier... view full answer...
The first thing you need to flat tow your 1993 Jeep Wrangler YJ is a base plate kit like the Blue Ox part # BX1137 which is a confirmed fit and easiest option to use.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.
For lighting... view full answer...
We had a customer send us a picture of the Curt Tow Bar part # C19745 attached to the front bumper of a YJ just like your 1995 Wrangler that I attached to this page for you to check out. view full answer...
The Replacement Single-Panel On/Off Switch # AT91959 is designed for certain Atwood gas and electric water heaters (like GH6-8E) but can technically be wired to a similar water heater from a different manufacturer.
Although I have no way to provide you with the color by color schematic for your Suburban water heater, the best I can do is provide you with a wiring diagram indicating the pin functions of the # AT91959 as well as the dual switch # AT91230. Note that the wire colors indicated... view full answer...
I have an option for you. But while the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR would not interfere with the tow bar going into the hitch, it is going to stick out 25-7/8" past your bumper which will interfere with your tow vehicle, especially during turns. There is not going to be an option for the back of your class c to have enough clearance to clear the towed vehicle.
The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 is a universal mounted hitch that... view full answer...
Go To Results