Hi Jesse; the only reason I can really think of is your bolt pattern. If you have a 1621 bolt pattern there is no reason why you wouldn't be able to use the lower rated Curt Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000 lbs # LC328492 you were looking at. If you have something like a Lippert Rhino the 21k # LC65VR is the only capacity available. The higher capacity will be fine, pin boxes are usually over by quite a bit anyway, but if there is a lower capacity option that can handle... view full answer...
The Furrion RV Refrigerator # FCR14ACBQABL is rated for 1.268 kWh/24h which is the equivalent of 1,268 Watts so I recommend going with at least the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch # PD64FR which is rated for 2,000 Watts.
The beauty of this inverter is that is has a built-in transfer switch so you'll actually be connecting both your battery bank and your shore power wiring to this unit and it will automatically pull power from shore power when you're connected... view full answer...
Hello Arthur, thanks for getting in touch. To measure a wet bolt you will just need to confirm the length and diameter of the bolt. Most wet bolts are about 3" long and 9/16" diameter like the Wet Equalizer Bolt with Locknut # 126B2. You will find the dimensions of this bolt below. Please compare this to what you have and see if it is a match. If you need a different size just let me know and I am happy to look into it. view full answer...
Thank you for providing those pictures. The correct control panel is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. view full answer...
Hello George. I can confirm that yes, the Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ will indeed fit your Lippert 7K axle. I was able to get ahold of Lippert and they confirmed the following specs for your axle:
7K
Inner race - 25520
Inner bearing - 25580
Outer race - 14276
Outer bearing - 14125A
Grease seal - 2.250 Inch I.D. - 3.376 Inch O.D. view full answer...
Since you're using a sliding hitch I'm assuming your 2017 Chevy Silverado 2500 is a 6-3/4' bed so the only option you'll have is replace the pin box of your 2017 Highland Ridge Open Range Roamer 337RLS with a rotating pin box and swapping the Demco Hijacker Autoslide 5th wheel hitch # DM8550034 with a standard fifth wheel hitch that will be a little lighter.
The Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package - Single Jaw - 20,000lbs # RP30890 weighs approximately 150lbs... view full answer...
Go To Results