You would need the Trivet Support Bumper # CFGH4ZSASSTRIVETSPRT. They replace the support bumper for your Furrion 3-burner gas cooktop.
We also have the replacement Furrion Grill Grates Gasket # FSRE21SA-014 they hold on the grill grate on your Furrion cooktop. view full answer...
The 10" x 2-1/4" Electric Brake Shoe/Lining # BP04-095 could possibly work, but I recommend going with the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly # AKBRKR-S-10 instead because it is designed specifically for the AxleTek brake shoes.
Usually we recommend replacing your whole brake kit instead of just the brake shoes because some of the other internal components would need to be replaced soon too. If you want to go this route then the kit you need... view full answer...
Thank you for the image of your axle tag. Your Dexter 5,200lb axle uses a Grease Seal # GS-2250DL. We do have this as a Pair # RG06-070 for both of the hubs on one axle.
We also have the Bearing Kit # BK3-300 that will include the bearings along with races and a grease seal for one of your hubs. I recommend keeping one of these along with Grease # L11390 in your 2021 Grand Design Reflection 303RLS 5th wheel just in case you have a bearing go out on a road trip. view full answer...
What you're looking for is an 86-1/2" long replacement axle. Since you will need new hubs and drums, along with brakes, I recommend getting the # 8327816-EB. This has a 71-1/2" spring center length so you will also need to cut off the spring seats and weld on # TRSS300 to match the current 68-1/2" measurement.
Grand Design does a great job listing their parts, but unfortunately they don't include the leaf spring information. You will need to measure your current leaf springs to find the... view full answer...
For your 2016 Grand Design Reflection 29RS, we have two possibilities for replacement springs that work for 4400-lb axles.
You need to measure from the center of one eye of the leaf spring to the center of the other to get the proper length. However, since yours are flat, they have stretched quite a bit. So, an accurate measurement will be difficult. More than likely, you will need the 26"-long 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles, part # e27SR I've linked to a video review... view full answer...
For your 2018 Grand Design Reflection 337RLS you need a 6,000 lb axle with an 86-1/2" hub face measurement and 68-1/2" spring center length. Since the spring seats can be moved, you can use the Trailer Axle Beam with Easy Grease Spindles # e33GR as a replacement.
This axle matches your current axle length and has a spring center measurement of 71-1/2". You will need to cut off the spring seats on the # e33GR and weld on # TRSS300 to match your current spring-center-to-spring-center length.... view full answer...
The MORryde Cushioned 5th Wheel Pin Box # MR74VR (11,501-14,000lbs) is the correct replacement for the pin box on your 2021 Grand Design Reflection 303RLS. This pin box has the correct bolt pattern(1621) and weight capacity(11,995lbs GVWR) for your Reflection.
Your Reflection 303RLS has a 1621 Pin Box # LC1191191 from Lippert. view full answer...
I can indeed; the correct replacement for the front jack of the Ground Control 3.0 on your Grand Design Reflection is the part number you referenced:
- Replacement Front Jack for Lippert Ground Control 3.0 Leveling System # LC362485 view full answer...
Your 2020 Grand Design Reflection has a Lippert 1621 5th Wheel Pin Box # LC1191191. For a replacement we have the Reese Sidewinder 5th Wheel King Pin # RP34FR that will move your pivot point back 22" for increased turning radius with a short bed truck. The Airborne will provide you with a smoother cushioned ride.
The included wedge will work with your Reese M5 5th Wheel Trailer Hitch # RP37FR on your Ram. view full answer...
It appears you will need the MORryde Suspension Upgrade Kit # MR46ZR for your 2021 Grand Design Reflection 303RLS. These shackles measure 2-1/4" from center of shackle hole to center of shackle hole. We also have the 3-1/8" Kit # MR76ZR if you have the longer length shackles.
I recommend filling the wet bolts with Grease # L11390 using the Grease Gun # L30416. The flexible hose and pistol grip handle make it easier to reach all the bolts. view full answer...
I was able to find information on another 2021 Grand Design Reflection 303RLS showing it came with a Dexter Axle and the Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459. This requires the Left # K71-675 and Right # K71-676 brake shoes. I recommend verifying you also have Dexter axles and the axle tag states you have the Nev-R-Adjust brake assemblies. view full answer...
Yes, we have the tie plates you're looking for that will fit a 3" axle. The # RM22MR is the C003169 with the notch and the # RM54GR is the C003170. Using these will convert the shock kit portion of your comfort ride system into the # RM-2460. view full answer...
I looked up the specs of the Flojet 030526144 and they are 2.9 gallons per minute and 50 PSI. The HydroMax RV Fresh Water Pump # P25201 is 3 gallons per minute and 55 PSI.
The HydroMax will work as a replacement water pump for your 2015 Grand Design Reflection. It mounts in any direction so installation should not be major reconstruction. view full answer...
If you can let me know what the pin box number is on your 5th wheel I can let you know which MORryde upgrade will be correct. There should be a sticker on the side of your pin box with a number listed on it that I'll need.
For example, the part # MR74VR is for 11.5K - 14.5K 5th wheels with 1621 and 1621HD pin boxes while the part # MR77VR is for a 11.5K - 14.5K 5th wheel with a 1116 pin box. These are the 2 most common pin box numbers so they will likely be a fit but if you have something... view full answer...
For your exhaust fan in your 2015 Grand Design Reflection 337RL 5th wheel you need the Replacement 12V DC Motor # BVD0218-00. Your current fan blade will press off the old motor and onto the new motor. view full answer...
The 10" x 2-1/4" Electric Brake Shoe/Lining (One Wheel) # BP04-095 are the brake shoes for the Dexter electric brakes and they will fit the Axletek brand just fine. The # AKBRKR-S-10 are also a fit for your 4,400 lb axles. view full answer...
Yes, the Grease Zerk # LC44XV for your Lippert Tandem Axle Equa-Flex AP Kit # LC64FR can be replaced as it is removable. Do note that this grease zerk is specific to Lippert as it has a special tapered thread that is not commonly used by other manufacturers.
We also have replacement Wet Bolts # LC126238 and # LC126197 if the bolt is damaged or the threads are broken off inside the bolt. view full answer...
The Replacement Tightening Knob for Solera Awnbrella Bow # LC346848 does not come with the square nuts which I presume you're referencing to the Replacement Hanger Block for Solera Awnbrella Support Bow # LC386206.
If you need any other replacement parts for your Solera Awnbrella Support Kit for 8' Projection RV Awning # LC362237, we also offer:
-The Replacement Label for Solera Awnbrella # LC387444.
-The Replacement Rubber Tip for Solera Awnbrella Support Bow # LC386207.
-The Replacement... view full answer...
Yes, the Mighty Cord RV Power Cord part # A10-5025ED90 would do a great job replacing the Furrion 50 amp 25 foot long cable you have now. This is also a 50 amp cord that is 25 foot long so it would work just as well. view full answer...
Go To Results