Hey Bob, yes we have the etrailer hitch part # e98842 that is a confirmed fit for your 2027 Ford Transit T150 and would be a great option with plenty of towing capacity. Are you going to be doing some towing? view full answer...
Hey Ioan!
So, I did some research into the 2021 Transit T-150 and I found some fun stuff...
It sounds like it's actually pretty hit and miss as to whether or not there is any factory wiring for a brake controller on the van, even if it came equipped with the tow package like yours. If you're one of the lucky ones, there will be a 4-wire harness that can be accessed by pulling the cup holder part of the console out - it'll be in there bundled up with clips.
If you have this, then installing... view full answer...
Yes, it can. The Pop & Lock Cargo Safe Powered Deadbolt Lock item # 100383 is designed to be mounted horizontally but it will function vertically. view full answer...
Hello again James; you can get replacement hardware for the Curt # C13193 using the Replacement Hardware Kit for Trailer Hitches # RHK. If it was just the bolts you could pick them up locally but you're going to need the spacer blocks as well which aren't readily available anywhere. I added our installation video below, and a picture showing the hardware.
For a 4-way you can use the Curt T-Connector Vehicle Wiring Harness # C56327. This will plug into the connection points behind the... view full answer...
Thanks for reaching out to us, Mary!
Amazon isn't the only place that has 12V converters - we have them here at etrailer as well!
Ultimately, you'll need an AC/DC Distribution Panel like the 35 Amp # PD4135K, but if you already have one of them in your RV then you can get just the converter like the 30A # PD49RR to change the AC power to DC so you can power up the MaxxFan Dome Roof Vent # MA00-03812W view full answer...
To use the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1225D with a lithium batttery you do need to connect the orange and the green wires together so that the voltage will be correct for that type of battery. A low voltage meter is not required. The optional LED is not required either. view full answer...
No, I am sorry it will not. The EcoHitch Hidden Front Trailer Hitch item # EH79CR stopped fitting the Ford Transit 150s after the 2023 model years. I do not have a custom fit front hitch for a 2024 Ford Transit 150. The only solution I have is to use the Combo Bar 12" item # E-11 and have one custom fabricated.
You'll definitely want to contact a local welding shop. view full answer...
Hey Lynn,
Yes! The Aries RidgeStep Running Boards # AA56FR come with all necessary hardware and mounting brackets for these to be installed on your 2023 Ford Transit. There is a custom mounting kit included with no-drill installation hardware and brackets!
Will you be installing these yourself? view full answer...
I checked with AirBedz and the width of the AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump # 341030 that you referenced is 52 inches at the wider point and then 43 inches wide at the rear. view full answer...
I attached a diagram that shows how the trailer wiring harness # 22114 wires. The red wire runs to the positive battery terminal for powering the taillight circuits of the trailer wiring. This way all the power that the taillights of the trailer draw come from the battery and not the vehicle taillights.
The black wire is the 12 volt power accessory circuit for the 7-way which is totally separate. view full answer...
Louis, the Thule Elite Van XT # TH302013 is available but its actually designed to fit 2014-2024 Ram ProMaster vans and is not going to work with your Transit.
Instead, I'd recommend going with a hitch mounted bike rack like the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR; you'd just need to add a trailer hitch like the etrailer Trailer Hitch Receiver # e98842 as well. view full answer...
Hey Diane, so what activates the Seaflo Diaphragm Pump for Boats and RVs # SE96FR is same as other RV water pumps and that's a drop in water pressure like when a faucet is opened. So this may not be an ideal solution for you but it would require basically cutting power to it any time you wanted to turn it off since it wouldn't ever have water pressure built up due to lack of faucet. view full answer...
No, it does not Bob. According to the instructions for the Rhino-Rack Pioneer Platform Rack item # RR63QX there are already predrilled holes in the roof of your 2025 Ford Transit T150. I have attached the instructions below so you can take a look at them and compare them to the roof of your Transit.
The Rhino-Rack Pioneer Platform Rack item # RR63QX has been confirmed to fit the 2025 Ford Transit T150.
If you have any additional questions feel free to throw them into the comment box below. view full answer...
You can definitely add both the RAS Custom Leaf Spring Enhancement Kit # RAS3623-GT as well as the SumoSprings Solo Custom Helper Springs # SSR-121-40 to not only give you a much smoother driving experience but also help fight sway from high winds or passing vehicles. All of this should help to keep your equipment from bouncing in the back.
I will say that even though these will drastically improve your driving experience, if your equipment doesn't weigh very much then it could still move... view full answer...
One way to raise the Curt cargo carrier part # C18153 would be to use a Curt hitch adapter part # D210. This has a second hitch opening above the ball mount platform which can give you additional height. Unlike other similar adapters it does not end up cutting the capacity of the hitch it is used in by 50% either. view full answer...
If you can access an open end of the frame where the weld nut broke off you could fishwire a new carriage bolt in place of the weldnut. Otherwise you may have to weld the hitch on or see if a local garage like you mentioned could come up with a way to re-weld in a weld nut.
For a bolt leader you could then use the # C58400. I attached a link to an install video that at the 1:30 mark shows how to fishwire hitch hardware. You will need to drill out the old weld nut. view full answer...
The coupler you referenced does not have replacement parts or a latch repair kit so if the thumb latch is busted you will need to replace the unit with the A-Frame Coupler # CA5400.
You can replace it with the same unit, the A-Frame Coupler # CA5400 which has has an oily finish but the same one is available without the oily finish and a black coat of paint, the A-Frame Trailer Coupler # CA-5400-B.
There is another option if you want to go with a different manufacturer, the Fulton A-Frame... view full answer...
For your application you just need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56327 which tees in behind the tail lights on your 2020 Ford Transit Connect and then pulls power directly from your battery. To mount it at the back of your vehicle I recommend using the mounting brackets # 18144 and # C57202.
Attached is an installation video of the T-One on a 2020 Transit Connect as well as the mounting brackets for you to check out. view full answer...
The Westin HDX Grille Guard with Punch Plate # W88XV has a shipping weight of 97 lbs so it should be about 92 lbs when you get rid of all of the packaging.
We haven't had the opportunity to install the HDX on a Ford Transit yet, but I am attaching a photo from the linked instructions so you can get an idea of what it will look like. view full answer...
Go To Results