Hello Les,
Thanks for writing in.
I reached out to Jensen, and unfortunately, they confirmed that the individual antenna parts are not available separately. They also could not confirm that the rubber mast from a new Jensen Antenna # 44US01R can be removed and swapped over to your existing ball mount.
Since Jensen can't verify that the parts are interchangeable, I don't want to tell you that it's as simple as removing the screw at the ball and swapping the antennas. The best option is... view full answer...
Hello Timothy, thanks for reaching out. We do offer some 225/75-15 tires on a 5 on 4-1/2" wheel, but the highest load rating we offer is a load range E, such as the Taskmaster Provider ST225/75R15 Radial Tire with Black Machined Trinity Wheel # TA77XR. This tire is load range E so 10-ply rater for 2,830 lbs at 80 PSI. I am sorry to say that we do not offer anything 15" with a load range F or G. view full answer...
Hi Tony!
They are indeed! You are looking for the Replacement Front Cover for Solera Power RV Awnings - Regal Idler Head - Black # LC643923 and Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black # LC643921. As a side note, the rear cover can also work with the Drive Head Front Cover # LC643922, so if your drive head is looking a little worse for wear, the back is the same part.
Oh and these do not include hardware. You will need to reuse the... view full answer...
Hey Alan, that would indicate a problem with the awning drive head so you'd want to replace it with the part # LC272067. This is not a difficult install. When installing the Solera Manual Pull Style Awning Drive Head, Black # LC272067 you will want the spring to be under some tension when completing the installation so that it draws the awning back fully once you've completed the installation. My contact at Lippert mentioned you'll want to secure the awning arm before removing the head... view full answer...
Hey Doug, from my research it looks like you have 3,500 lb axles on your 2016 Coachman Clipper RB16 so for brake assemblies you'd want the part # TRU36FR which is a set of left and right assemblies that are also self adjusting. view full answer...
He Dave, do you know how long of a battery cable you need and the gauge by chance? We have some options but I would need to know more info to help get you what you need. view full answer...
To pick out a grease cap you would need to measure the diameter of the bore of your hub where the current cap is so that we can pick you out the correct replacement. For example, the part # RG04-040 is a very common size at 1.99 inch.
But I attached a link to a page that has all of the grease caps we carry as well. view full answer...
Yes the roof style you have on your 2012 Coachmen Clipper is exactly what the SportRack roof rack part # SR1020 is designed to fit. I attached a picture that shows it installed on a roof just like yours. view full answer...
We do have the Replacement Caliper for Dexter 10" Brakes # K71-773-01 which is a direct replacement for your Dexter K71-773-01 calipers you have currently if you're just looking for those.
If not, the Kodiak Disc Brake Caliper # KDBC225DAC will also work since Kodiak is owned by Dexter and these calipers are also for 10" brakes, rated for 3.5K to 6K axles. view full answer...
If the sidewall of your 4.80-12 size tires say 90 psi then that is what you want them to be when the tires are cold (after they have been sitting for a while like overnight). This is the psi rating that the manufacturer has tested and approved to be safe with the weight rating that is listed on the tire. The psi will actually increase some during travel due to heat build up but the manufacturer has already accounted for this.
The 90 psi rating is actually normal for that size tire. For... view full answer...
We carry a lot of stuff—but unfortunately, we don’t have the telescoping lift arm assembly for your Coachmen Clipper pop-up camper. That said, I can point you in the right direction!
Many Coachmen Clipper models use the Goshen lift system, which features telescoping posts. You can find replacement parts directly from Goshen Stamping by contacting them with your camper’s make, model, and year. view full answer...
Before we can find you the replacement spring that would work for you, you will have to take off a current spring off your 2014 Coachmen Clipper 17BH and measure from the center of the spring eye to the center of eye spring along the curve. We would also need to know the weight capacity of your axle.
The 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # SP-051275 measures out to be 26 inches from center of spring eye to center of spring eye. The spring is for a 4,000 pound axle.
I... view full answer...
The Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches Item # DL6456 can be used in place of your crank handle on your Coachman Clipper 806XLS Pop Up camper. The socket adapter measures
7/8" x 7/8" x 3/4" and fits 1/2" drills. view full answer...
That picture of your wheel is pretty crazy! I hope the damage was minimal and no one got hurt!
If you damaged a bearing there's a pretty good chance you also damaged the spindle it rides on. You'd need to inspect the spindle to make sure it's free of damage. If it's damaged it's probably a good idea to just replace the axle since you are already at the point of replacing most of the axle. Especially if the hubs are currently pretty rusty on both sides most likely.
You are going to need... view full answer...
Yes, the Camco UltraGuard Pop-Up Camper Cover # CAM45765 is going to be compatible with your trailer's rooftop AC unit. Manufacturers add in a bit of extra slack since every camper is going to have an AC unit or roof vent on it. view full answer...
That is exactly what it sounds like is going on. for your situation I recommend checking the wiring on the back of the switch to make sure it's clean and has solid connections. If it looks like it needs to be replaced then you just need the switch itself:
- Black Switch # LC285500
- White Switch # LC285499
Just be sure to follow the wiring instructions that come with the switch if you end up replacing it. view full answer...
The stereo systems used in RV's aren't listed anywhere for us to know what you currently have so I would really need to have you remove the unit from the wall/dash/cabinet it's in and measure the cutout hole to determine a good replacement. For example, the Jensen RV Stereo w DVD Player # JWM70A you were looking at requires a 7-1/2" wide x 2-3/4" tall x 6-1/4" deep cutout hole. view full answer...
Self adjusting brake assemblies do not affect anything aside from the way the brakes adjust. There would be no affect on what sounds like your EZ Lube spindle setup. view full answer...
We don't have any way of knowing what anode rod is needed for a water heater in any specific trailer. If you have a Suburban (Mor-Flo) heater use the Camco RV Water Heater Anode Rod # CAM11563; for an Atwood water heater use the Camco RV Water Heater Anode Rod # CAM11553. view full answer...
I looked up your Apex by Coachmen qb24 and it appears to have a double step setup below the door so for a 24 inch wide double step with 7-7/8 inches of drop between the steps our best option is the Flexco Manual Step part # SMFP-2100. It's hard finding steps with a shorter drop between stairs but this would be best option. view full answer...
Go To Results