Your 2021 Buick Enclave has a wiring pigtail and not a connector for wiring a Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. The 4 wires are located below the OBD2 port behind the side kick plate(see Image). This is where you will be able to attach the included pigtail using the Heat Shrink Butt Connectors # DW05744-5 and # DW05745-5. You will only need 2 of each connectors for the 4 wires that connect to the brake controller pigtail. view full answer...
The Draw-Tite Class III # 75528 and the Curt Class III Trailer Hitch # 13424, which are the available trailer hitches confirmed to fit the 2014 Buick Enclave, are compatible with certain model years of the GMC Acadia, Saturn Outlook and the Chevy Traverse. However, the trailer hitch on your Buick Enclave will not fit your new Lincoln MKX, as the body styles are simply too different between the vehicle models.
If you are able to tell me the year of your Lincoln MKX, I will be happy to... view full answer...
Installing the Draw-Tite Max-Frame Trailer Hitch Receiver, # 75528, will require the removal of the rear fascia, and will not be able to be reattached on Buick Enclaves that are model year 2012 and older. I have added a link to an install video which demonstrates an attached hitch so you can get a feel for how your 2011 Enclave will look after a completed install. view full answer...
Yes, the Roadmaster FuseMaster Fuse Bypass Switch part # RM76512 will work on your 2017 Buick Envision and is also recommended to be used while flat towing this vehicle. In order to flat tow your vehicle with 4 wheels down, you will need a base plate kit, tow bar, safety cables, supplemental braking system, wiring harness, and possible high-low adapter. I will attach my recommendation for each of these components below.
For a base plate kit designed to fit your vehicle, I recommend the... view full answer...
When towing a vehicle on a dolly like the part # RM-2050-1 that you referenced you need the steering wheel to be locked so that around corners the dolly fenders don't hit the door or fender of the vehicle.
If your steering wheel doesn't lock when the key is off you can use your seat belt to lock it. Wrap the seat belt a couple times around the steering wheel and then buckle it in place. Now pull the seat belt all the way out so that as you let it retract it locks. Now your wheel will be locked. view full answer...
We currently only have one trailer hitch receiver for your 1999 Buick LeSabre which is the Draw-Tite Trailer Hitch Receiver part # 36216. This option will give you a Class II hitch with a 1-1/4" receiver tube opening. I have attached an installation video on a similar 1997 Buick LeSabre for you as well.
If you can tell me what you will be using the hitch for I would be glad to offer some additional recommendations for you as well. view full answer...
It absolutely will; so long as you have a hitch for your 2018 Buick Regal Sportback like the Curt Trailer Hitch Receiver # C12185 that fits, you can definitely use the EasyFold, which is the following part number:
- Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202
The EasyFold XT # TH903202 has a 65 lb per-bike weight capacity so it can easily carry a pair of 50 lb ebikes, and is a really smart choice for a bike rack. It uses adjustable, padded clamps and tire straps to secure... view full answer...
If you're asking whether or not a 2" Reese ball mount can be used with the Curt Trailer Hitch Receiver # C12115, then the answer is no because this hitch only has an 1 1/4" receiver.
Without swapping the hitch out with a 2" hitch you'd have to use a hitch expander like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD, but using this expander will cut the tongue weight capacity of your hitch by 50% which would make the hitch pretty much useless.
Your best bet is to just use... view full answer...
So long as your portable fridge/freezer gets its power from plugging into a 12 volt vehicle outlet then yes it can be powered by the RoadMaster 12-Volt Extension Cord # RM-9331. view full answer...
The best hitch for your 2023 Buick Envision is going to be the Curt Hitch item # C94NR. This hitch is custom fit and bolts to your Buick with included hardware.
This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight.
I have linked a couple of pictures below so you can see what this hitch looks like when installed.
If you are planning on towing you will also need and a ball mount kit item # C45534. view full answer...
Yes, the Kuat Dirtbag Bike Rack's like part # DRT15X110 and part # DRT9P will work with the Saris Traps Fork-Block Bike Carrier Base part # SATRK33. I have attached a few photos to show the fitment for you. view full answer...
There are a couple of things to consider if you decide to swap out your 8" trailer wheel like the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30060, with a larger 12" tire like the Aluminum Spoke Wheel for Malone MicroSport and MicroSportXT Trailer # MPG469.
The first, which it sounds like you've already thought about is the height issue. When going from an 8" wheel to a 12" wheel you are going to gain about 4" of additional wheel diameter.
Since you've already mentioned... view full answer...
I would be happy to help you. The Draw-Tite Max-Frame Trailer Hitch Receiver item # DT55GR is a confirmed fit your 2021 Buick Encore GX. It is a 2" Class III hitch receiver that has a maximum tongue weight of 525 lbs and a maximum gross trailer weight of 3,500 lbs. It is custom fit and bolts directly to your Buick with included hardware. Its behind the bumper installation means there will be no visible crossbar and only the 2" x 2" receiver will be visible.
For a wiring harness you will... view full answer...
The Yakima # Y01166 Replacement Top Infill Strips are designed for the T-slots used on Yakima HD crossbars like # Y01158. The strips are meant to fit into a 11mm wide channel that widens to 22mm, as shown in the provided diagram.
If you'd care to reply with the width of the T-slots on your factory crossbars, I can look for other fits if these won't work for you. view full answer...
For your 2020 Buick Enclave I recommend the CIPA Universal Towing Mirrors # 7070-2. As these are universal fit you will be able to attach them to the mirrors on your Enclave. I have linked an installation video below that shows them being installed on a 2019 Chevrolet Blazer that has very similar mirrors to the ones on your Enclave. view full answer...
Yes, the Curt Trailer Hitch Receiver # CU29FR will fit your 2024 Buick Enclave. This receiver is designed to fit behind the removable rear fascia panel providing a clean factory look which can be hidden when not needed.
You can combine this with either the 4-Way # C56394 or 7-Way # C56393 depending on which connector you may need for the trailer you could tow. If you only intend to use this with hitch mounted accessories the 4-way will allow you to use Auxiliary Lights # C53201 in the... view full answer...
At this point in time (August 2023) Demco is the only company that has a base plate kit for your 2024 Buick Encore GX:
- Demco Base Plate Kit # DM67YV
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components just let me know and I can make some additional recommendations for you. view full answer...
The correct Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers for a 2022 Thor Odyssey Entegra on Ford E-450 Chassis is part # 3034-P which will allow you to install any Tekonsha, Reese, or Draw-Tite electric trailer brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. view full answer...
If you have narrowed your decision down to two the RockyMounts MonoRail # RKY10007 and the Saris Freedom # SA4412B, I would encourage to take a look at one more, the or theRockyMounts HighNoon FC Solo # RKY87RR.
The Freedom has a very high 8 inch shank rise and the RockyMounts is configured in such a way that the platform the bike will sit on is quite a bit higher than that of the other two racks.
I agree that the Thule EasyFold XT # TH903202 was a good suggestion because it takes lifting... view full answer...
Go To Results