See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Adding a Trailer Wiring Harness and Brake Controller to a 2006 Toyota Sienna
  Trailer wiring harness # 118648 fits the 2015 to 2017 Toyota Sienna but not your 2006 model. For your 2006 Toyota Sienna the comparable trailer wiring harness is # 118304. This is not a powered harness though so if you want one that does both fit your van and require a connection to the battery you can use Hopkins harness # HM11143485. Since the trailer you want to tow has electric brakes you will also need to install a 7-Way trailer connector, in addition to one of the 4-Ways listed above,...
  view full answer...
• Switching An Electric Over Hydraulic Brake Set Up To Surge Brakes
  Hi Scott! You can do either! The brake controller option would be the way I would go though as you wouldn't have to bleed the brakes (which is a pain in the butt) and it can be used with other trailers that have electric or electric over hydraulic brakes (plus it works better than surge brakes). For that, you will only need a few things, but I wanted to ask a few things first. Are you sure it's a 6-pin plug? They aren't used very often, but will still work. I included a picture showing...
  view full answer...
• Will Curt Class III 2-Inch Hitch # C13105 Fit a 2008 Toyota Sienna Limited
  The Curt Class III 2-Inch Hitch, part # C13105, you have referenced, will fit your 2008 Toyota Sienna Limited. If you are meaning an installation DVD on the hitch, I do not offer any installation DVDs. I am including a link to the installation instructions and a link to an installation video of the Curt hitch being installed on a 2006 Sienna. The vehicle is a different year, but it is the same design second generation Sienna as you 2008 model. If you plan on doing some towing, I recommend...
  view full answer...
• Will Curt Trailer Hitch # C13105 Fit a 2010 Toyota Sienna with All Wheel Drive
  Yes, the Curt trailer hitch, # C13105, will fit all models of the 2010 Toyota Sienna including all wheel drive models. I have included a link to a video that shows a typical installation for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin and clip, and a carrying bag. For trailer wiring use # 118304. I have included links to the instructions for the wiring as well.
  view full answer...
• Difference between Tekonsha T-One and Curt T-Connector Wiring Harness for 2007 Toyota Sienna
  The Tekonsha T-One # 118304 and Curt T-Connector # C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and turn signal wires on this vehicle are separate. The converter is needed to combine the two functions to be compatible with the trailer wiring system. The Curt # C55580 does have higher maximum amperage for the stop/turn and tail lights and is...
  view full answer...
• Brake Controller and Install Harness Wiring for 2008 Toyota Sienna
  For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well. You will need to start with a 4-way (if...
  view full answer...
• 2015 Toyota Sienna Se Trailer Hitch Recommendation for Ground Clearance
  The rear of your 2015 Toyota Sienna does sit pretty low. For a trailer hitch for your vehicle the best option is going to be the smaller 1-1/4 inch trailer hitch size like the part # 36513 as it will offer slightly better ground clearance than a 2 inch hitch. For a ball mount you would need the part # 36051, 2 inch hitch ball # 19258 or 1-7/8 inch ball # 19256. For trailer wiring you would then want the # 118498.
  view full answer...
• Recommended Hitch and Wiring for 2006 Toyota Sienna Towing Trailer With Golf Cart
  In order to transport your golf cart with a trailer you will need a trailer hitch, wiring, and a ball mount. I recommend the following for your 2006 Toyota Sienna: -etrailer Trailer Hitch Receiver # e98837 -T-One Vehicle Wiring Harness # 118304 -etrailer Ball Mount Kit for 2" Hitches # 989900 The etrailer hitch is a Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 3,500 lbs and a bolt-on installation. It also features a matte black powder coat finish and...
  view full answer...
  
• How to Wire a Brake Controller on a Toyota Sienna 2005 XLE
  You will need a Wiring Harness, item # 118304, to start with. Once you have this wiring harness installed and working properly you will need to do some additional wiring to complete a 7-Way connection at the rear of the vehicle. You will need the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7. This kit comes with all of the wiring, brackets, circuit breakers and connectors needed to complete the installation of a brake controller and a 7-Way connector. To complete the wiring...
  view full answer...
• Troubleshooting 2008 Toyota Sienna With Trailer Running Lights Not Working
  There is not a separate fuse in the wiring harness itself. Normally for the functions like stop and turn to work but the running lights not to work is a bad ground wire connection on the vehicle or the trailer. Running lights stay on, so they draw more current than the other functions. Check the wiring harnes ground wire (normally white) where it attaches to the vehicle and make sure you have a clean metal to metal connection. Also check the trailer ground for the same. Any corrosion,...
  view full answer...
• Turn Signal on 2004 Toyota Sienna Hyperflashes with Brake Pedal with Wiring Harness 118304 Installed
  First let's make sure that everything is hooked up properly. The red and green wires on harness # 118304 will go to the passenger side and the yellow and brown go to the driver side. If those were swapped it could cause some issues. Also make sure that the white ground wire is attached to a bare metal surface. Moving the ground could help. Ground problems can cause all sorts of weird things to happen. To determine if the converter box is bad, you will need a circuit tester, # PTW2993,...
  view full answer...
• Trailer Hitch Receiver and Wiring for 2009 Toyota Sienna
  The Curt Trailer Hitch Receiver # C13105 is a great choice. We also include a great installation video on the product page with your 2009 Toyota Sienna. I recommend a Brush # 814092 to clean out those threads on the mounting holes as they will be filled with dirt and road grime. This will help when installing your hardware to ensure you don't cross thread your bolts. For the wiring I like the Tekonsha Vehicle Wiring Harness # 118304 best for your Sienna. It is plug and play with your factory...
  view full answer...
• Hitch Recommendation for a 2004 Toyota Sienna Towing Small Trailer
  For a hitch for your 2004 Toyota Sienna that will allow you to do some towing I would recommend the Hidden Hitch part # 87415. This is a Class III hitch with plenty of capacity that would work great for you. I attached an install video for you to check out as well. This hitch has the capacity for towing your small trailer and lawn mower, but you will also want to check the owners manual of your vehicle to determine the towing capacities of it as well and be sure to go with the lowest rated...
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2007 Toyota Sienna
  The best fitting and best priced hitch we offer for your 2007 Toyota Sienna is the Draw Tite part # 75237 which is a confirmed fit. This hitch has more than enough capacity for a jet ski trailer as well. I attached an install video for that for you to check out as well. For trailer wiring you then would want the part # 118304 which is confirmed as a fit and is the most reliable option we have. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
  view full answer...
• Trailer Lights Not Working with 2008 Toyota Sienna with Never Used Tow Package Wiring
  Since you have not used the trailer wiring harness on your 2008 Toyota Sienna until recently then there are a couple of likely things happening. First, the pins on the vehicle side connector could have corrosion in them even if the harness was stowed away the whole time. that can happen to untreated metal. Using a wire brush or screwdriver to clean out the metal contacts will help. The other thing to look at is the ground connection. This is usually a white wire. It needs to be connected...
  view full answer...
• Parts Needed to Add a 7-Way Trailer Connector to a 2006 Toyota Sienna
  For the 2006 Toyota Sienna you would need to use the 4 and 7 way installation kit # ETBC7. There is no powered plug in connector available for the Sienna just because the vehicle is not set up for it. If you already have a 4-Way wiring harness on the van then the ETBC7 will be all you need. But if the van currently has no wiring you will first need to install a 4-Way using # 118304. I have linked instructions and a video for this harness. If you wanted a powered 4-Way converter instead...
  view full answer...
• Best Trailer Hitch for 2007 Toyota Sienna
  To tow a trailer with your 2007 Toyota Sienna, the best hitch is going to be the Class III Draw-Tite # 75237 over the Class III option from Curt because the Draw-Tite is rated for a higher capacity and is also the more economical choice. This hitch has a 2" receiver and 4,500 lb towing capacity, which is 1,000 lbs more than the capacity of your Sienna though please be sure to adhere to the 3,500 lb capacity of your vehicle. You are also gonig to need to add a 4-way connector # 118304 to...
  view full answer...
• How to Add Taillights on Thule T2 Bike Rack That Blocks Taillights of 2009 Toyota Sienna
  Although it's intended for a cargo carrier, we have a light kit that work great for you. Part # 98174LED provides long lasting LED lamps that use minimal power but are very bright. You'll also need two brackets for the lamps, part # BK70BB. The brackets could be mounted to the underside of the rack using bolts or even zip ties if the idea of drilling holes in your bike rack doesn't thrill you. Another option would be magnetic tow lamps like # RM-2120 that could be installed on top of your...
  view full answer...
• Trailer Wiring Harness for a 2006 Toyota Sienna
  For your 2006 Toyota Sienna there is a plug and play wiring harness available, # 118304. This harness will fit, and just plugs in line with the vehicle tail light wiring. There is no splicing into the vehicle tail light wiring required.
  view full answer...
• Wiring Harness, Sensor, and Electrical Problems After Installing a Spliced Wire Harness on a Toyota
  The item you selected, T-One Vehicle Wiring Harness, part # 118304, will work on your Toyota. There is another harness that will protect the vehicles circuits, the Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness, part # C59496. This kit only draws .5 milliamps from the vehicle lighting system and uses a circuit protected modulite that is a safe guard from short circuits or wiring shorts. Part # C59496 draws power directly from the vehicle battery, and only draws...
  view full answer...
• What Trailer Hitch Is Recommended For Towing A Boat With A 2005 Toyota Sienna
  I will be glad to help you with your hitch selection. The Draw-Tite Class III 2 Inch Hitch # 75237 would be an excellent choice for the towing situations you have described. With the 2 inch receiver you will have a wider selection of accessories available that you may need in the future such as bike racks and cargo carriers. It has a towing weight capacity of 3,500 lbs. and a tongue weight capacity of 350 lbs. At this time, there is not a Class II receiver with the 1-1/4 inch hitch opening...
  view full answer...
  
• Trailer Wiring Harness for a 2015 Toyota Sienna
  We do have some wiring harness options that will fit your 2015 Toyota Sienna. Tow Ready harness # 118648 and Curt harness # C56261 will fit your Sienna as long as it is not an SE model. Both harnesses do require a connection to the vehicle battery. I have linked a help article with tips on routing the power wire.
  view full answer...
• Trailer Wiring Harness for a 2009 Toyota Sienna
  Neither of the trailer wiring harnesses for the 2009 Toyota Sienna require a direct connection to the vehicle battery. Both Tow Ready harness # 118304 and Curt harness # C55580 plug in line with the vehicle tail light wiring and the only other connection that needs to be made is the ground wire. Some vehicles require a powered converter if there isn't a plug and play type of T-connector available or if the wiring is suspected to not be able to handle the power draw without a powered converter....
  view full answer...
• Recommended Brake Controller For 2004 Toyota Sienna
  Brake controllers are not vehicle specific, so it is a matter of personal preference on which controller you choose for your 2004 Toyota Sienna. I recommend using a proportional brake controller. A proportional controller will activate the trailer brakes in proportion to your vehicle's braking action. The Tekonsha Primus, part # TK90160 is an excellent controller at a great price that would be an excellent choice for you unless the trailer you're pulling has an electric over hydraulic...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?