
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy trailers, campers, or bed loads can make the rear sag and the front lift, throwing off how your truck steers and brakes. The Timbren Rear Suspension Enhancement System adds up to 12,000 lbs of additional support above the rear axle, keeping your ride level and stable when towing or hauling. The hollow rubber springs compress under load to share the weight, so your handling, traction, and braking stay consistent even when the bed is full or the trailer is heavy.

Uneven terrain and bumpy highways can beat up both your suspension and your comfort. These Aeon hollow rubber springs act like progressive shock absorbers, taking the brunt of bumps and jolts before they reach the cab. The flexible rubber design cushions light loads for a smooth ride and stiffens as weight increases for solid control. By reducing road shock and bottoming out, they also help extend the life of your factory suspension.

When a trailer sways or sharp turns shift weight to one side, each Timbren spring reacts independently to keep that side steady. This independent action helps cut down on body roll when cornering or swerving and keeps off-center loads balanced. With less side-to-side movement passed along to a trailer, sway settles faster so you stay in control through gusts, curves, and uneven roads.


Getting better load support doesn’t have to be complicated. Timbren’s custom-fit brackets bolt directly onto the frame rails above the rear axle using the included hardware—no drilling required. Each spring sits just 1" above the axle so your factory suspension handles light loads normally, while the rubber springs automatically engage under heavier weight. It’s an easy upgrade that’s ready for real-world hauling as soon as it’s bolted on.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at the Timbren Rear Suspension Enhancement System. Now, this product fits the 2012 to 2015 Freightliner MT series. So, it'll fit the MT 45 and 55 models. It is designed to improve suspension, handling and safety and it'll provide additional support as needed. So, that way you have a smooth comfortable ride. When these are installed they still allow the leaf springs plenty of movement, while cushioning light loads so it won't affect the empty ride of the vehicle and these springs are designed to become more rigid as more weight is added.
So, that's going to help increase overall stability. It's going to provide better performance while hauling heavier loads. So, it's also going to help reduce vehicle sag and it's going to fix that issue of bottoming out. Also, if these are installed you're going to feel like you have a lot more control over the vehicle.So, they help compensate for off center loads. They work independently side to side and it's going to reduce body roll when swerving and turning corners and when you experience passing traffic or cross winds this is going to help keep your vehicle in a straight line as you head down the road.
So, it also reduces the amount of sway that your vehicle will experience. They act as shock absorbers, taking the brunt of bumps and rough roads which is going to help extend the overall life of your vehicle suspension system. With this part number you get two hollow rubber springs. You get the vehicle specific brackets and you get the necessary hardware needed for simple installation. They are designed to replace the axle bump stops on the frame of the vehicle.
No drilling required. It's a simple bolt on installation. When it comes to the capacity we're looking at 12 thousand pounds. Just be careful not to exceed the vehicle's weight carrying capacity and this product is covered with a satisfaction guaranteed limited lifetime warranty. That's going to do it for today's for the Timbren Rear Suspension Enhancement System..
Ratings & Reviews

Kate F.
5/6/2026
Glad to hear the Timbren systems worked out so well for your RAM Van Mitchell! It’s great that you noticed the smoother, more progressive response compared to the factory bump stops, especially under load. Thanks for sharing your experience with both the front and rear installs, that’s really helpful for others considering the upgrade. What kind of loads are you usually hauling with your van?

Brooke M.
5/7/2025
Wow, thank you for sticking with us, Don! That is awesome. I think you made an excellent choice here. Timbrens are tough and the heavy duty are SUPER tough. Glad to hear these were a good fit. Love the photos! Is that your own property?

Don
5/21/2026
The TIMBRENs work as stated during when I am pulling anything heavy. However, when the truck is not pulling anything, anyone riding in the rear seat gets a very hard jarring jolt when driving over any roadway repairs, bumps, expansion joints on bridges. I wished that I would have went with the Super Springs, or the Road Active Suspension. I may replace the TIMBRENS later.


Lazer S.
6/16/2026
They definitely look like they are helping, Orlando! How are they when you aren't towing? We hear a lot of people say they can be pretty harsh when unloaded.

Robin H.
9/22/2026
Thanks for taking the time to share such a detailed review and all of the pictures! The unloaded ride is a concern we hear fairly often with SES upgrades, so your experience with the 1" gap and rough-road testing will be really helpful to others considering these for their F-250. We appreciate the kind words about Naomi and our team as well. Looking forward to your update once you get some miles on them with the Rockwood!

Heather A.
4/24/2026
Hi there, thanks for reaching out, that’s actually a common issue with this type of trim. The one you tried is a standard flat insert, but some RVs (like your NOBO) use a slightly domed trim to help it sit over the screw heads in the track. If the screws stick up even a little, a flat trim won’t fully snap in place, which sounds like what you’re running into. The best way to find the right replacement is to remove a small piece of your original trim, lay it flat, and measure the full width from edge to edge. Most are either 3/4" or 1", but the shape matters too, not just the width. If yours has that domed profile, you’ll want something similar or a softer vinyl that can flex over the screws. If you’re able to send a quick photo of your track or old trim, I’d be happy to help you find a better match.

Mike L.
4/23/2026
Niiiice, I see what you did there!! That looks like a sweet setup!


Mike L.
4/2/2026
Glad to hear they worked well for you Jerrod. Hope you had a good trip!

Mike L.
2/26/2026
Thank you Darrell, we're glad to hear your Timbrens are still on the job!

Kate F.
4/23/2026
Thanks for sharing your experience Thomas. It is great to hear the Timbrens made a noticeable difference in ride quality and reduced body roll on your E350 Class C. We also appreciate the heads-up on the install. That kind of real-world feedback about brake line clearance is very helpful for others working on a similar setup. Would be nice if they had a stronger option, if you need the 5K, might need to go to airbags, but who wants to deal with having to air up if you don't need to. Where are you off to on the next adventure?

Kate F.
5/6/2026
Glad we had the right suspension upgrade to help with the squat Dennis! How is the ride when you are unloaded?

Christopher H.
8/14/2026
Love hearing this! Really appreciate the detailed feedback and photos. That extra stability when you're loaded up can make a huge difference. And installing them at 11 at night—that's commitment. Hope they treat you just as well on those mountain roads. Safe travels and we'll definitely make sure Dee Dee gets the shoutout.


Heather A.
2/21/2025
Timbrens are the best for sag because they are made of dense rubber. 6500 lbs sounds like one heck of a travel trailer, what is it? Any fun plans this summer?


Jerome
3/2/2026
Awesome product. Would recommend.

Lazer S.
8/19/2026
Glad to hear they are working well for you, Ryan! Now that they are on, where you headed?

Christopher H.
9/3/2026
Happy to hear the Timbrens are making that big of a difference Tony. Thanks for including the photo and we appreciate the kind words! Have you taken any longer trips with the Timbrens installed?


Jesse M.
9/10/2026
Awesome! Glad to hear the Timbrens made such a big difference in the ride quality. Thanks for sharing! Happy travels!

Mike L.
4/2/2026
Thanks for the photo, Sid. Quite a bit of difference there!!

Mike L.
4/29/2026
Thanks for the excellent photos, Steven!

Nick S.
12/15/2025
I am glad to hear they helped with both the sway as well as the rear sag with the camper! Not adjustable like airbags but they do the trick. What kind of camper do you have?

Kate F.
7/13/2026
Bud, thank you so much for taking the time to leave a review! I'm glad to hear the suspension upgrade helped reduce the sagging and porpoising while towing. I also really appreciate you including the installation pictures and sharing your tip about removing the rear wheels. I'm sure that will help the next person tackling the install. Thanks again for choosing etrailer!

Heather A.
5/8/2026
I love to hear that David. I am glad the Timbrens are working out so well for you with the truck camper. That Rogue is pretty fancy, is it a pop up too?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Jay S.
8/14/2026
Now that its been a year Im very impressed with them. Theres no ride detriment without the 5th wheel attached and they do a great job of mitigating squat