To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy trailer or cargo loads can leave your van squatting and less controlled. These air springs add up to 5,000 lbs of leveling support to reduce sag, sway, and bottoming, while internal jounces let you run 0 psi unloaded.
Typical Alpha HD Pro installation shown. Vehicle-specific brackets vary by application.
When trailer weight or a heavy cargo load settles your van onto its rear suspension, squat and extra body movement can make the van feel less controlled. The two adjustable rear air springs add supplemental support to help reduce sag, sway, and bottoming while letting you tune the suspension to the weight you're carrying. With up to 5,000 lbs of load-leveling capacity, you can add only the pressure the load calls for instead of treating maximum pressure as the default. Your van can sit closer to level and remain more controlled while carrying or towing substantial weight.
A van that tows one day and runs empty the next doesn't need the same rear-suspension support all the time. Internal jounce bumpers let you add air when your trailer or cargo is aboard, then reduce the air springs to 0 psi once that load comes off. Those internal jounces also protect the air springs against bottoming when suspension travel is used up. You get the support your van needs under weight without having to keep air in the bags simply to protect them when you're driving empty.
Suspension hardware lives where road spray, dirt, and weather reach it, so material choices matter underneath your van. This kit uses braided stainless steel air lines along with stainless steel fittings, Schrader valves, roll plates, and mounting hardware to add corrosion resistance throughout key parts of the system. That extra durability is focused where it matters, helping the hardware you rely on for load support and pressure adjustment stand up to the environment beneath a working van.
You'll start by measuring your van's stock ride height and checking tire-to-frame clearance before removing the factory jounce bumpers, with rear-wheel removal optional if you want more working room. The air spring assemblies mount between the frame and leaf springs using the existing jounce-bumper mounting locations up top and U-bolts below, with some emergency-brake cable hardware moved out of the way for clearance. Once the springs are positioned, aligned, and torqued, you'll install the passenger-side exhaust heat shield, then route the braided stainless steel air lines with enough clearance and slack for suspension movement before mounting the Schrader valves where they're easy to reach. Adding air bags is a job experienced DIYers can handle, but if you would rather leave it to a professional, we can help you find an installer near you.
The included Schrader valves give you everything you need to adjust the air springs manually, but pulling out an external compressor can get old if your towing or hauling setup changes frequently. You can add a Pacbrake Bravo Wireless Air Control Kit (sold separately) to adjust pressure from your phone, check live pressure, and save presets for loads you come back to regularly. Also, you'll be able to choose between filling both air springs together or controlling them independently when the load isn't even side to side. It's an optional upgrade, but one that makes the adjustable part of an air-spring system much easier to use regularly. And it's not the only solution available. There are a variety of compressor options from Pacbrake that might be the perfect fit for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look at this Pacbrake Alpha HD Pro rear axle airbag suspension kit with internal jounce bumpers and stainless steel hardware. Now, this kit has been specifically designed to fit your 2014 to current Ram ProMaster, the 1500, 2500 and 3500s. So, on custom fit parts such as this kit, I do recommend taking advantage of our vehicle fit guide here at etrailer. Just pop in the year, make, and model of your vehicle and answer any other questions that it might have for you, and our fit guide will confirm if this kit will work for you or if we have something comparable that will work for you. So, when the load gets heavy, your truck is going to need more than just the rear springs hanging on for dear life.
These airbags are gonna give you up to 5,000 pounds of rear axle support, keeping your truck level and steady even when your trailer is loaded, your bed is packed, and the miles are long. So, you're not gonna have to worry about any more rear end sagging throwing off your braking or steering, or your headlights pointing straight up into the air. Also, bottoming out just doesn't feel rough, it can actually wreck your airbags. That's why this system has jounce bumpers inside of each bag. I have an example of a double convoluted bag there on your screen, but the idea is the same.
Inside of these bags, you're going to have jounce bumpers, and that's going to allow you to run these even with no air pressure. So, your suspension is going to have a built-in safety net, so you're gonna be able to safely run at zero PSI when unloaded. That means no harsh rebound, just that smooth, factory-style ride. This kit includes the stainless steel braided airlines, which are gonna be more durable and resistant to wear compared to those standard rubber lines. You're also going to get these stainless steel roll plates which are gonna help protect the airbags, along with Schrader valves so you can easily inflate or adjust the air pressure using a standard air source.
On your screen, I'm throwing up another set of photos, there. The top photo is the standard hardware that this is going to come with, along with the lines and the brackets, here. But the bottom photo is the stainless steel upgrade kit that's also included with this. So, this is what you're going to be getting with this kit. Of course, those stainless steel components are going to be a big upgrade for you.
That's included with this kit. They're built to last in harsh conditions. Stainless steel is gonna resist rust and corrosion a whole lot better than the standard materials. It's also stronger and less prone to damage, so you're less likely to deal with leaks or wear over time. But every haul's gonna be different. That's why these air springs give you full control over ride height and firmness, with adjustable air pressure from five to 100 PSI. For instance, if you're hauling a fifth wheel or a full bed of gravel, you'll just crank up that pressure. If you're unloaded and heading home, you drop it back down for a softer ride. With the manual inflation valves included, tuning your suspension for the day's work's gonna be pretty easy. These springs are built with 1" thick corrosion-resistant end caps, and they're also reinforced with 20 internal support wires, giving you that maximum strength under load. These also feature precision laser-cut brackets. They're powder-coated, and obviously, they're designed to bolt cleanly to your truck's existing mounting points without welding or drilling to your frame. Again, these are gonna give you a load-leveling capacity of up to 5,000 pounds, but it is important to note that air springs do not actually increase your truck's weight carrying capacity, so you do wanna make sure that you're not exceeding your manufacturer's recommended weight limits. One final note I wanted to mention, if you want help with getting these installed on your ProMaster, on this product page, there is a link underneath the photos section that will take you to our installer locator. Answer the questions that it has for you, and our installer locator will find an installer that etrailer has partnered with in your area to do the install for you. If you happen to have any other questions, don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well, again, my name's Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Kate F.
6/25/2026
I am very sorry to hear that these did not work for you John. I see on both the Pacbrake site and our site they are listed to not work with the Adaptive Ride Control, do you have that on your Silverado 1500? I am trying to get to the bottom of this so I can get the information corrected on both sites if needed.