To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7,500-lb Capacity. When your truck or van squats under weight, steering gets light and control fades. These extreme-duty air bags level your ride, help keep you in control, and protect your suspension from the punishment of heavy loads.
When your truck or van is built to carry serious weight, factory suspension alone won't cut it. Alpha XD (Extreme Duty) air springs add up to 7,500 lbs of rear axle support to keep your vehicle level and steady under pressure. If you're hauling heavy gear or equipment, you stay in control with less squat, better stability, and more predictable braking.
Some days you're maxed out, others you're running light. With Pacbrake's 5 to 100 psi adjustable range, you get the right support for every trip. When carrying heavy weight, add air to level your suspension and maintain steady handling. Running without a load? Drop to the minimum pressure for a smoother, more compliant ride without stiffness or bounce. Manual valves let you adapt your suspension to whatever the day throws at you.
Built for demanding commercial use, Alpha XD springs use one-inch thick, corrosion-resistant end caps and 20 internal support wires for extreme strength. Heavy-duty roll plates reinforce mounting points and protect the air springs from wear, and powder-coated steel brackets hold up to rust, road salt, and long seasons of abuse. From scorching heat to frozen job sites, this system is made to outlast whatever the road dishes out.
Adding serious load support shouldn't mean losing a whole weekend. The precision laser-cut brackets are designed to bolt cleanly to your vehicle's existing mounting points with minimal drilling. Just smart engineering that fits the way it should, which is perfect for the DIYer. Manual valves mount through license plate fastener holes or a location of your choosing (which may require drilling). With high-quality fittings, pre-bent brackets, and mounting hardware included, you'll be back on the road in just a few hours without a trip to the fab shop.
This kit is designed to work with your setup today and wherever your upgrades take you tomorrow. Inflate manually right out of the box - no extra parts required. Already running an onboard air system? The Alpha XD integrates easily. Planning to add a wireless controller later? No problem. With standard ports and fittings already in place, the foundation is built in, making it easy to expand your control options when you're ready.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look at this Pacbrake Alpha XD Rear Axle Air Bag Suspension Kit. Now, this kit has been designed to fit your 2026 to current Ram 4500s and 5500s, both the 2-wheel and 4-wheel drive models. Now, I do recommend taking advantage of our vehicle fit guide here at etrailer. Just pop in the year, make, and model of your vehicle, answer any other questions that it might have for you, and our fit guide will confirm if this kit will work for you or if we have something comparable that will work for you. So if you're looking for a suspension upgrade that's going to help your vehicle stay level and stable when you're carrying heavy loads or towing, this air spring kit is designed to do exactly that.
This kit is custom fit for your vehicle, as I mentioned. So this is going to use these precision-engineered laser-cut brackets that are gonna bolt directly to existing factory mounting points, so the installation is gonna be straightforward and require no drilling. With up to 7,500 pounds of load leveling support, this kit is built for serious work applications, including hauling heavy cargo, towing large trailers, commercial uplifts, and equipment transport. So when weight is added to your vehicle, these air springs are gonna help reduce rear-end sag, minimize body roll and sway, and absorb road shock. The result is gonna be improved ride quality, more confident steering, and safer braking performance under that heavy load.
Now, one of the biggest advantages is going to be this system's ability to adjust the air pressure. And so, the air pressure can be set anywhere from 5 to 100 psi, allowing you to fine tune the amount of support based on your current load. So whether you're driving unloaded, carrying tools for work, or towing a heavy trailer, the suspension can be adjusted to match the situation. So this kit includes everything that you're going to need for installation. Now, I did not have room on my tabletop for all the hardware that comes.
And as you can see, I did kind of loosely assemble this just to kind of give you an idea of how the brackets and the roll plates and hardware is gonna fit together. But on your screen, I've got a photo of everything that you're gonna be getting. So you're gonna get everything that you need for installation. You're gonna get these heavy-duty air springs, the reinforced roll plates, the laser-cut powder-coated steel brackets, the air lines, and all the necessary hardware that you see there on your screen. And this is going to work with simple manual inflation right out of the box.
But this is also ready to be paired with an onboard air compressor later if you want the convenience of making adjustments from inside of your truck. Durability is a major focus here. These air springs feature one inch thick corrosion-resistant end caps and 20 internal support wires for exceptional strength. These heavy-duty roll plates are gonna help reinforce the mounting points and reduce wear on your springs, while these powder-coated steel brackets, are gonna resist rust, road salt, and harsh weather conditions. So whether you're dealing with extreme summer heat, freezing winter temperatures, or demanding job site conditions, this system is built for long-term durability, it's built for the long haul. Now, I mentioned that this has a capacity, a support of 7,500 pounds. Now, I do wanna let you know that this does not actually increase your Ram's weight carrying capacity, so you wanna make sure that you're not exceeding your manufacturer's recommended weight limits. One final note I wanna make. If you think you would like to have this installed for you rather than you yourself dealing with the installation, we have you covered there. On this product page, typically found underneath the photos section, we have a link that will take you to our installer locator. Click that link, answer the questions that it has for you, and that locator will find an installer in your area that etrailer has partnered with to install this kit for you. I think that's gonna wrap up our look today. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Kate F.
9/24/2025
I am sorry to hear that install did not go more smoothly Brian! Can you please elaborate on what extra modifications were needed? We like for our information to be as accurate as possible, under the tech tips I see: -No drilling through vehicle frame required for installation. -Product does not fit models with ride height sensors . -Designed for vehicles with Dual Rear Wheels only. Can you please also verify that your 2024 Sprinter 3500 does not have the ride height sensors, and that you do have the dual wheels. Once I gather this information I will be reaching out to Pacbrake directly to get better answers =)