bing tracking image
  1. Vehicle Suspension
  2. Monaco
  3. Montclair Motorhome
  4. 2011
  5. SuperSprings Intl
FITS 2011 Monaco Montclair Motorhome
SumoSprings Solo Custom Helper Springs - Front Axle
SuperSprings Intl

SumoSprings Solo Custom Helper Springs - Front Axle

In Stock
$257.99
Vehicle Suspension
Confirmed to Fit
2011 Monaco Montclair Motorhome

25PCS - Ford

28PBD - Ford

29PBT - Ford

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 1-800-940-8924 for expert service. We are your Monaco vehicle suspension experts, and offer a great price. etrailer.com carries a complete line of SuperSprings Intl products for your Monaco Montclair Motorhome 2011. SumoSprings Solo Custom Helper Springs - Front Axle part SSF-106-47 from SuperSprings Intl can be ordered online at etrailer.com. Complete vehicle suspension installation instructions and technical support.
  • All Info
  • Reviews (650)
  • Q & A (0)
  • Photos

2011 Monaco Montclair Motorhome - SumoSprings Solo Custom Helper Springs - Front Axle

  • Bump Stops
  • Towing/Load Leveling
  • SuperSprings Intl
  • Light Duty
  • Front Axle Suspension Enhancement
  • Suspension Only

1,000-lb Capacity. Upgrade your Monaco Montclair Motorhome's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.


Features:

  • Helper springs upgrade your vehicle's front suspension for improved driver control and comfort
    • Support heavy front-end loads to keep your vehicle level
    • Help to absorb bumps and shocks
    • Minimize sway
  • Progressive load control - springs compress according to the weight of your cargo
    • Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
    • Heavier loads - springs compress by as much as 80 percent for support
  • Springs work independently from each other to compensate for off-center loads and reduce body roll during sharp turns
  • Durable microcellular urethane
    • Works in temperatures from -25 F to 200 F
    • Resists damage caused by oils, road salts, and UV rays
  • Minimal lateral expansion - springs compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
  • Maintenance-free - no tubing to run or air pressure to monitor like with air springs
  • Simple, no-drill installation
  • 2 Jounce-style springs included
  • Made in the USA


Specs:

  • Weight capacity (at 50-percent compression): 1,000 lbs
    • SumoSprings will not increase your vehicle's weight-carrying capacity
  • Limited lifetime warranty
  • 30-Day satisfaction guarantee


Front Suspension Support

A heavy front load can cause front-end sag as your factory suspension compresses under the weight of the load. This means that the front axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your rear axle, your rear tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.


Installed spring when it is not compressed

SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.


Installed spring when it is compressed

The springs can also compress by as much as 80 percent to support a heavy front load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your rear tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.


The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.


Durable, Custom-Fit Springs

These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).


SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.


The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.



SSF-106-47 SuperSprings Sumo Springs Solo Front Monaco Montclair Motorhome Suspension Kit - Heavy Duty

Item # SSF-106-47

Installation Details SSF-106-47 Installation instructions

Customer Satisfaction Score:

Ratings & Reviews

4.7

648 reviews
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
648
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Which Hellwig Anti-Sway Bars Should Be Installed on a 2022 Entegra Odyssey 26D
    Hey Robert, thanks for reaching out! You are correct that you'll want to install the rear Hellwig Anti-Sway Bar # HE78RR first on your '22 Entegra Odyssey 26D, and then if you still need more help you can install the front Hellwig Anti-Sway Bar # HE26GR. You'll see a bigger difference with the rear bar replacement than you will with the front which is why we recommend changing out the rear first. Some additional upgrades you might be interested in for the the future are a steering stabilizer...
    view full answer...
  • Difference Between The SumoSprings Helper Springs # SSR-106-54-1 And # SSF-106-47
    The SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-106-54-1 you referenced are for extra heavy duty and rated for 7,000-lb capacity and are designed for your rear axle while the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 are for light duty and are for the front axle of your motorhome. Both are a fit for your Class C motorhome and will help minimize sway and body roll. I do not recommend just looking at the colors of the springs as Super Springs uses their...
    view full answer...
  • In Which Order Should SumoSprings Be Installed On A 2006 Fleetwood Jamboree Motorhome
    It doesn't matter which order you install the SumoSprings on your 2006 Fleetwood Jamboree GT 31W motorhome. Typically the rear needs the most help when it comes to enhancement so that's where most people start, but if you're doing both it doesn't really matter. For your Ford E-450 Chassis you would want the SumoSprings Maxim Custom Helper Springs # SSR-106-54-1 for the rear and the SumoSprings Solo Custom Helper Springs # SSF-106-47 for the front. I've attached some videos below to help...
    view full answer...
  • Availability of SumoSprings Kit that Fits 2021 Ford E-450 Motorhome
    Hey Mario, yes we do have a front set of SumoSprings that fit a 2021 Ford E-450 motorhome chassis with the part # SSF-106-47. Are you wanting to improve ride quality or handling?
    view full answer...
  • Which Front Hitch and Suspension Enhancement for 2012 Coachman Freelander RV with E-350 Chassis
    It looks like the 2012 Coachman Freelander RV was built on an E350 chassis, so you'll want to use the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65053, which is designed to fit on the front of the E-350 RV chassis. This is a custom fit hitch designed specifically for this vehicle that has a 500-lbs vertical load limit, so you'll want to be sure that your scooter and carrier stay under that weight combined. If you need a carrier for the scooter as well, the 32x48 Reese...
    view full answer...
  • Suspension Enhancement Recommendation for 2018 Forest River Forester Motorhome E-450
    Adjustable suspension enhancement would be your best option. This will give you the ability to add the exact amount of additional support you'd need to prevent bottoming out while also not making the suspension overly stiff. So for that you'd want the Firestone Ride Rite kit part # F22ZR which is a confirmed fit for your 2018 Forest River class C 32 ft. on a Ford E-450 chassis. For a compressor kit to make inflating and maintaining the air bags easy we have the Firestone kit part #...
    view full answer...
  • SumoSprings Recommendation for 2018 Thor Vegas 27.7 Built on E-450 Chassis
    Yes, we do have confirmed SumoSpring fits for your 2018 Thor Vegas 27.7. For your 2018 Thor Vegas built on a Ford E-450 van chassis you can use front SumoSprings # SSF-106-40 or # SSF-106-47 if the vehicle is 2-wheel drive. There is no SumoSpring option for 4-wheel drive models but if you have a 4x4 then you can instead use Timbren springs # TUMDF70. The difference between the 2 SumoSpring options is capacity. Set # SSF-106-40 is rated at 500 pounds at 50 percent compression whereas...
    view full answer...
  • Recommended Front and Rear SumoSprings for Thor Class C on 2020 Ford E-350 Chassis
    Yes, the ford E-Series chassis remains unchanged in 2020. So, as long as your 2020 Freedom Elite is a 2WD, you can use the SumoSprings Solo Custom Helper Springs # SSF-106-47 for the front axle and the SumoSprings Maxim Custom Helper Springs # SSR-106-54-1 for the rear axle. Please note that the rear kit requires 7 inch minimum clearance from sidewall of tire to frame on dual rear wheel models. Both of these are going to offer the highest capacity offered in SumoSpring for your application...
    view full answer...
  • Recommended Superspring SumoSprings For 2007 E450 Class C Motorhome RV
    The only front mounted hitch confirmed to fit your 2007 E450 Cutaway motorhome is the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65001. This hitch has a maximum 500 lb vertical load. For a motorcycle carrier, I recommend the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long - Steel - 500 lbs # e98873 which weighs about 58 lbs leaving you a capacity of 442 lbs for your motorcycle. The Ultra-Fab # UF48-979033 would also work, weighing in at 51 pounds. For...
    view full answer...
  • Recommended SumoSprings for a 2014 Jayco Greyhawk 31DC
    The most common suspension enhancement option for a 2014 Jayco Greyhawk 31DC is without a doubt SumoSprings which is what I recommend. These will do an excellent job of helping to provide additional support, increased stability/ride quality, and decreased sway. I have attached below the correct options for the front and rear. SumoSprings Maxim Custom Helper Springs part # SSR-106-47-1 (Rear) SumoSprings Solo Custom Helper Springs part # SSF-106-47 (Front)
    view full answer...
  • Which Front SumoSprings Kit Fits 2019 ford E-450 Class C RV
    Hey Donald, for the front axle of your 2019 Ford E-450 RV the SumoSprings kit part # SSF-106-47 is what you will want. This will provide the front suspension an additional 1,000 lbs of suspension support which will help with handling and sway reduction like you are wanting. I attached a picture of what it looks like installed. Basically it installs to the side of the spring and strut. Have you tried any other suspension modifications on your RV yet?
    view full answer...
  • SuperSprings Suspension Enhancement for 2001 Coachmen Catalina Sport Class C Motorhome
    We have the SuperSpring kit part # SSA22 which is a fit for the rear axle of your 2000 Ford E-350 chassis motorhome as well as the part # SSF-106-47 for the front. You'll note that the rear axle is a SuperSpring and the front is a SumoSpring. We don't have a SumoSpring for the rear axle of you vehicle.
    view full answer...
  • SumoSprings For A Winnebago Motorhome On A Mercedes-Benz Sprinter 3500 Chassis
    Hello Allen. For a Winnebago camper on a Sprinter 3500 chassis, I definitely recommend the 1,000 lb Sumo Springs # SSF-106-47. I would go with the 1,000 lb for really any 3500 model, just because they will give you the needed additional support for larger vehicles. They will help a lot to increase stability and get rid of any sagging on the front end.
    view full answer...
  • Front Suspension Enhancement for 2017 Sprinter 3500 Class C RV
    Hey John! If someone makes an upgraded front anti-sway bar for the 2017 Sprinter 3500 that is what I would add next. It doesn't look like Roadmaster or Hellwig have one and those are the brands we carry so I can't say for sure. Outside of that, I would add the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47. These will smooth out the ride and help further reduce sway and body roll. Any big trips planned with your Sprinter this summer?
    view full answer...
  • SuperSprings and SumoSprings for 2006 Greyhawk Class C Motorhome
    Hey Mark, you'd want the SuperSprings part # SSA22 for the rear and the SumoSprings part # SSF-106-47 for the front and you'd be set! Are you trying to improve handling?
    view full answer...
  • Recommended SumoSprings to Combat Sway on a 2022 Forester LE 2351 Ford
    Hey Carol. I would get the Helper for the rear and the Solo for the front. For your 2022 Forester LE 2351 Ford, I recommend the SumoSprings Maxim Custom Helper Springs item # SSR-106-47-1 for the rear end and the SumoSprings Solo Custom Helper Springs item # SSF-106-47 for the front axle. The Maxim Custom Helper Springs item # SSR-106-47-1 have a 5,000 lbs capacity. They're not only going to help with sway by firming up your rear end. They're also going to help absorb bumps and road...
    view full answer...
  • Rear Sway Bar and SumoSprings for 2024 Mercedes Sprinter High Roof
    Hey Jim, you would want the Roadmaster rear bar part # RM-1209-128 for your 2024 Mercedes Sprinter High Roof 2500. The feedback we've gotten on this bar for your Sprinter has been really good for improving the handling and reducing sway. Then for a front set of SumoSprings you would want the part # SSF-106-47 and you'd be set.
    view full answer...
  • Best Suspension Upgrade for a 2023 Leisure Travel Van Unity 24RL on a 2022 MB Sprinter 3500 Chassis
    Hey Rick, thanks for the information! It looks like your 2023 Leisure Travel Van 24RL is a 2WD so that excludes the options for rear SumoSprings. Instead, I recommend the Timbren Rear Suspension Enhancement System item # TMBRSP35A. These are designed to stabilize your rear suspension and help you with that top heavy sway feeling. For the front end, you'll be able to use the SumoSprings Solo Custom Helper Springs item # SSF-106-47, you were looking at. These replace your existing bump...
    view full answer...
  • SumpSprings Bump Stops For A 2016 Forest River Sunseeker 2500TS
    I did some research and it looks like your 2016 Forest River Sunseeker 2500TS has a Dry Weight of 11,500 pounds and a fully loaded GVWR of 14,500 pounds. With that said, I recommend the following SumoSprings: SumoSprings Solo Custom Helper Springs - 1,000-lb Capacity - Front Axle # SSF-106-47 SumoSprings Solo Custom Helper Springs - 2,800-lb Capacity - Rear Axle # SSR-130-54 These will definitely give you a good amount of support. Are you experiencing a lot of issues with your suspension?...
    view full answer...
  • Rear Suspension Enhancement Options For 2025 Ford E-450 Transit
    Hello Johnny, thanks for reaching out. Unfortunately, SumoSpring does not offer any fits for the 2025 Ford E450. We do have fits from Timbren though. Here is what we offer: - Timbren Suspension Enhancement System - Rear Axle # T68GR (for passenger van models) - Timbren Suspension Enhancement System - Rear Axle # T68GR 5,600 lb capacity (for motorhome models) - Timbren Suspension Enhancement System - Rear Axle # T78GR 8,600 lb capacity (for motorhome models)
    view full answer...
  • Best Suspension Enhancement For 2024 Mercedes-Benz Sprinter 3500
    The best option for suspension enhancement for your 2024 Mercedes-Benz Sprinter 3500 are SumoSprings: - SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 - SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-338-47 The SumoSprings offer the best support for your because they compress based on the amount of weight placed at the rear of your Sprinter. When you are towing, the SumoSprings will take the brunt of the weight put on your truck's rear suspension to counteract...
    view full answer...
  • Front Suspension Enhancement Kit that Fits 2002 Mercedes Sprinter Tiburon Class C 2500
    While we don't have any steering stabilizers that fit the front suspension of your 2022 Mercedes Sprinter Tiburon Class C we do have a set of SumoSprings part # SSF-106-47 that are a confirmed fit. These will greatly reduce sway and stability so it would be a worthwhile upgrade.
    view full answer...
  • Recommended Front And Rear SumoSprings For A 2011 Ford E-350 Van
    For your 2011 Ford E-350 Van you'll want need the SumoSprings Solo Custom Helper Springs # SSF-106-47 for the front and # SSR-107-54 for the rear. The # SSF-106-47 has a 1,000lb capacity and the # SSR-107-54 has a 2,800lb capacity to help support your van's suspension and reduce wear and tear. These are completely maintenance free after installation and offer a progressive load control so that your ride quality won't suffer when unloaded, like some other suspension enhancement options on...
    view full answer...
  • Correct Front Sumo Springs for Motorhome On Ford E-450 Chassis
    The correct SumoSprings Solo Custom Helper Springs for a motorhome with Ford E-450 Chassis is part # SSF-106-47. These will be a direct bolt-on swap with improvements to both ride quality and sway control. If you decide to replace the rears as well you'll want to use the SumoSprings Maxim Custom Helper Springs part # SSR-106-47-1. These require a bit more install (drilling) but offer the same great improvements in ride quality and sway control as the front.
    view full answer...


< Previous
123. . .8



Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Thomas T
Video by:
Thomas T
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Mary K
Written by:
Mary K
Employee Wilson B
Edited by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Jacob H
Test Fit:
Jacob H
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<