Replacing a manual or worn-out tongue jack? This kit pairs a 3,500 lb electric A-frame jack with a rubber SnapPad for button-operated lifting and a wider landing surface that stays attached between stops. Great Prices for the best trailer jack from Benton. etrailer Electric Trailer Jack w/ SnapPad - Hardwired - A-Frame - 3,500 lbs part number e356GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Q & A (0)
Related Parts
Photos
Benton Trailer Jack
- e356GR
Car Hauler
Enclosed Trailer
Utility Trailer
3001 - 4000 lbs
Electric Jack
Bolt-On
A-Frame Jacks
With Round Foot
With Jack Pad
18 Inch Lift
Benton
Replacing a manual or worn-out tongue jack? This kit pairs a 3,500 lb electric A-frame jack with a rubber SnapPad for button-operated lifting and a wider landing surface that stays attached between stops.
Highlights
Leave the Hand Crank Behind: 3,500 lb electric jack raises your trailer tongue with a button press.
More Footing at Camp: 7-3/4" rubber SnapPad increases ground contact on grass, gravel, or dirt.
Leave the Pad on Between Stops: Snap-on rubber pad stays attached to the compatible 6" round jack foot.
Get Extra Reach Without Running the Motor: 4-1/2" drop leg brings the foot closer to the ground.
Find the Coupler After Dark: Built-in LED work light illuminates the hitch area during nighttime setup.
A Backup When Power Is Out: Included manual crank raises or lowers the trailer tongue without 12V power.
Features to know about
Skip the Crank at Every Hookup
Replacing a worn-out jack or switching from manual to electric? This 3,500 lb A-frame jack lifts and lowers your trailer tongue with a button instead of hand cranking. It has 18" of powered lift and a pinned drop leg that adjusts another 4-1/2" before the motor starts. That gives you more reach when the hitch height changes, without winding the jack through all that extra distance.
Give the Jack Foot More Ground to Grip
Grass, gravel, and soft campsite soil can be tough on a small metal jack foot. The included SnapPad fits the jack's 6" round foot and expands its ground contact to 7-3/4". Recycled-tire rubber cushions contact with paved driveways, while the snap-on design stays attached between stops. Set it once and you're not digging around for a separate pad every time you park.
Make the Late Arrivals a Little Easier
Pulling into camp after sunset? The built-in LED lights up the coupler while you get situated. The jack bolts to an A-frame mount and wires to 12V power; rubber-covered controls and an included cover help protect it from the weather. If your battery dies, use the included manual crank to raise or lower the tongue.
Specs
Capacity and Lift:
Lift capacity: 3,500 lbs
Powered lift: 18"
Drop leg adjustment: 4-1/2"
Total adjustment: 22-1/2"
Jack Dimensions and Mounting:
Overall height: 29-1/2"
Mounting plate height: 8-7/8"
Outer tube diameter: 2-1/4"
Footplate diameter: 6"
Mounting: bolt-on A-frame, 3-bolt pattern with 3" on-center spacing
Finish: black powder coat
SnapPad Dimensions and Construction:
Application: 6" round jack foot
Outer diameter: 7-3/4"
Overall height: 1-3/4"
Height from foot platform to lip: 3/4"
Weight: 2.4 lbs
Material: recycled-tire rubber
Mounting: permanent snap-on
Electrical and Operation:
Motor voltage: 12V DC
Motor protection: 20A automatic reset relay fuse
Work light: front-facing LED
Manual backup: included hand crank
Included Components:
1 electric A-frame jack
1 SnapPad jack pad
Manual backup crank
Jack cover
Jack mounting hardware
Warranty:
Jack: limited lifetime
SnapPad: 2-year limited
MN6SP1 REPL SnapPad Jack Stand Pad for 6" Round Jack Foot
e23ZV etrailer Electric Trailer Jack - A-Frame - 3,500 lbs
WARNING: This product and the engine exhaust from this product can expose you to chemicals including CO, which are known to the State of California to cause cancer or cause birth defects and other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Customers Who Purchased This Trailer Jack Also Bought...
Hi Daniel! I recommend the etrailer Electric Trailer Jack w/ SnapPad for your 2022 Jayco Jay Flight 28BHS. These use the standard three bolt A-frame mount and wire to your camper's 12V battery. You can choose from the following based on the capacity you need:
-etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR
-etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR
Both have 18" of powered lift and an adjustable drop leg so you won't have to run the motor as far at... view full answer...
Hey Tyler! The etrailer Electric Trailer Jack w/ SnapPad can be rotated for tailgate clearance. You'll rotate the entire jack which will angle it back and away to make room for your tailgate to drop. This applies to both versions:
-etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR
-etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR
It won't be a true 90º mounting position because of the triangular mounting pattern, but customers have found with similar models... view full answer...
Hey Melissa! I'd stick with a hardwired jack since your trailer already has a battery. That lets you operate the jack without having your truck nearby or plugging into its 7-way. I recommend the etrailer Electric Trailer Jack w/ SnapPad, and you can choose from the following based on the capacity you need:
-etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR
-etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR
A 7-way-powered model like the etrailer # e22QV is handy... view full answer...
Hi Kevin! A 3,500 lb jack is plenty for most travel trailers since it only needs to lift the tongue weight, not the entire trailer. You'll choose based on your loaded tongue weight rather than the trailer's total weight. We have the following options:
-etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR
-etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR
The 5,000 lb model gives you more lifting capacity to spare, and can be a little quicker under heavier loads.... view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.