Product Experts Available Now!
Call 1-800-940-8924
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
(3695 reviews)
Price: $670.00
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Part Number: 4412-3
In Stock
$670.00
Retail:$742.50
You Save: $72.50
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (3695)
- Q & A (0)
- Photos
Roadmaster Tow Bar Base Plate - 4412-3
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Ready for Flat Towing: Direct-connect brackets create solid attachment points for safe RV towing.
- Blends In When Not Towing: Removable drawbars leave only hidden brackets for a clean front end.
- Built to Last: All-steel construction with black powder coat resists corrosion and heavy use.
- Hooks Up Fast: No crossbar needed—direct connection makes setup quicker and simpler.
- Fits Heavy-Duty Use: Computer-cut brackets mount to the vehicle frame for exceptional strength.
Features to know about
Made for a Clean Front End: Hidden Bracket Design with Removable Drawbars
This setup keeps your vehicle looking stock when you’re not towing. The direct-connect base plates use a hidden bracket design, and the front arms come off easily by pulling two pins. Once removed, the remaining brackets sit tucked inside the grille area, out of sight and protected from scrapes or scuffs. It’s a clean look that also keeps the hardware safe when you’re on or off the road.
Built Strong to Handle the Load: All-Steel, Computer-Cut Construction
Every piece of this kit is made from computer-cut, all-steel components that give it exceptional strength. The heavy-duty design eliminates the need for a crossbar, simplifying hookup and keeping everything solid when towing. A black powder coat finish adds durability and corrosion resistance so it stays looking sharp after miles of use.
Simplified Hookup Every Time: Direct-Connect System with Hitch Pin Attachment
The direct-connect setup uses hitch pins for quick, secure attachment to your tow bar. There’s no crossbar to wrestle with, which means faster alignment and fewer steps each time you hook up. The system is compatible with Roadmaster tow bars that slide into trailer hitch receivers—such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, and Falcon 2—so you can connect directly and get on your way sooner.
DIY-Friendly and Complete: Bolt-On Install with Hardware and Instructions
Everything needed for installation comes in the box, including mounting hardware and step-by-step instructions. The brackets bolt directly to your vehicle’s frame with no welding required. Once installed, you’ll have a precise custom fit that feels solid from the first mile to the thousandth.
Specs
Construction and Design
- Construction: Computer-cut, all-steel construction provides exceptional strength
- Finish: Black powder coat finish is durable and corrosion resistant
- Bracket Design: Hidden bracket design - drawbars are easily removable via 2 pins
- Arms: Front arms are easily removable when not in use
- Mounting: Install onto vehicle's frame to provide attachment points for a motor-home-mounted tow bar
- Installation: Simple installation - no welding
- Fit: Custom base plates ensure a perfect fit for your vehicle
- Appearance: Partially Hidden design for sleeker appearance
Compatibility
- Tow Bar Compatibility: Compatible with all Roadmaster tow bars that slide into trailer hitch receivers
- No Crossbar Needed: Crossbar not required because these direct-connect base plates are designed for strong, heavy-duty applications
- Tow Bar Types: Works only with Roadmaster tow bars that slide into a trailer hitch (such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, and Falcon 2)
- Incompatible Tow Bars: Will not work with tow bars that require a hitch ball
Included Components
- Included: Instructions and mounting hardware
Origin and Warranty
- Country of Origin: Made in the USA
- Warranty: Limited Lifetime Warranty
Note
- The EZ Hook safety cables included with Roadmaster's Sterling tow bars will not work with direct-connect base plates. These cables connect to an anchor plate on the Quick Disconnect crossbar, which will not be present when you are using these base plates.
- The drawbars, or front arms, on the direct-connect base plate kit are simple to mount and remove, easily securing with pins. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
4412-3 Road Master MX Base Plate Kit
This Product Fits The Following Vehicles
- 2008 - 2010 Ford F-250 Super Duty
- 2008 - 2010 Ford F-350 Super Duty
Ratings & Reviews
4.8
3695 reviews
by:
John
07/15/2026
2026
ford
Ranger
Had these installed at Lester’s Automotive in Boerne,Texas…First class service all the way. Paul and his crew worked through lunch for over 4 hours to install these on our 2026 Ford Ranger. Also ran the wire and hooked up my auxiliary tow lights. The price for this was very reasonable and would highly recommend them for all r.v. needs even if not real close to the Boerne area. R.V park within reasonable distance if needed.
by:
Jeff
02/11/2025
2014
Chevrolet
Silverado 1500
Etrailer comes through again! This was a great savings as a used kit, but it was even better than the description online. I have installed (4) baseplates on and etrailer.com has given me great videos to watch and good instructions to follow. Couldn't be more pleased with the quality, service and delivery times.
Jeff
2/12/2026
I’ve pulled the Chevy behind our motor home several times over a the last year. It has worked excellent. And when not in tow the tubing is barely noticeable.
by:
Mark
02/25/2026
Easy to install needed to replace some fasteners as they broke removing front grill was able to get them from Amazon cheap
Gwendolyn Y.
2/26/2026
Looks great, Mark! Where are you off to next?
by:
Crystal
03/28/2026
Awesome instructions! Install was fairly easy. Product is very high quality and solid construction. Thank you E Trailer!
Heather A.
4/10/2026
Wow great job Crystal! It looks great! Also, I couldn’t help but notice “Ski Express” on the car, that’s pretty cool. What kind of work do you do?
by:
Arthur
05/29/2026
2015
Jeep
Wrangler
It mounted up just as the instructions said it would. From previous research I was not surprised when some of the mounting did not align perfectly. Had to use a dremel tool to make it work. The product looks very sturdy from its design. I’m happy with it and look forward to RV traveling.
by:
Larry
09/22/2026
Pathetic and just talking to Noah he states he will get to my issue later when he has time!! My car is on jacks all torn apart and I think Roadmaster gas misled advertising. This 523228-5 baseplate is NOT MADE FOR 2026 CHEVY TRAX!!!
Mike L.
9/23/2026
Which trim is your 2026 Chevy Trax? Per Roadmaster, the # RM25EQ (523228-5) fits all trims of the 2026 Trax except the ACTIV trim....
by:
David
08/01/2025
Chevrolet
TrailBlazer
This works perfect with my Roadmaster tow bar. It was a little difficult to install since I had to remove the front end of the Trailblazer, but with the good directions that came with it and some you tube videos made the installation easier.
David
8/2/2026
It’s been a great year. No problems with the base plate. Works great with my tow bar. Towed my trailblazer from Texas to North Dakota and back, and several short trips.
Jerred H.
8/2/2026
@David
That is great to hear David! Thanks for coming back and sharing that feedback. I appreciate you taking the time.
by:
Gary
06/18/2025
2013
jeep
Wrangler
I bought and installed this tow plate one year ago on my 2013 Jeep Wrangler. I bought this particular plate due to the jeep having a Barricade off-road bumper. This plate attaches a bit lower than other plates and prevented having to modify the bumper. Installation was easy involving only hand tools. The plate comes with all needed bolts and attachments. I have towed this Jeep several thousand miles behind my RV with absolutely no issues. As an aside, I use a Roadmaster Night Hawk tow bar which is also an excellent product. Both are expensive, but I believe cheaping-out on safety is no a good idea. I highly recommend this product.
Gary S.
6/19/2026
No issues at all. This is a solid piece of equipment.
Heather A.
6/19/2026
@GaryS Thank you for letting us know! What is your favorite adventure so far?
by:
Marc
04/12/2026
2017 f150
Customer service was very helpful. Easy to install. No bumper or grill cutting however, you do loose your front hooks. Nice low profile.
Customer service was very helpful. Easy to install. No bumper or grill cutting however, you do loose your front hooks. Nice low profile.
by:
James
07/25/2026
2019
Ford
Transit T250
This Road Master Direct connect base plate works perfectly for a 2020 ford transit cargo 250! Awesome service from etrailer as usual! The finished product can barely be seen through the front fascia!
by:
Paul
10/23/2026
I just followed your video of the installation and it was on point !
by:
Michael
09/25/2025
I have lots of issues with this tow bar. Initial installation was difficult due to a tight fit. Had to have my mechanic cut holes in frame to get bolts attached. After a few times of use the bolts failed causing the bar to fall fwd that then damaged my hitch arms. To fix I drilled new hole through bar and frame securing it with a #8 bolt. To reinforce it I used turnbuckles attached to my bumper. last tow finally went well.
by:
Joe
05/19/2026
It’s a super strong and wonderfully engineered addition to my new Maverick pickup.. Couldn’t be happier with it!!!!! Well done!!!!
by:
John
10/09/2026
The product is great - I gave 4 vs 5 stars only because I had to drill the rear holes out as they did not align with the holes in my frame and I had to drill out the hole in the bracket to align with my frame extension hole, again bracket did not align with the existing hole. However, in general it appears to be a solid mount.
by:
TC
10/10/2026
Great Base plate, had to modify the non-oem bumper a little to get the clearance needed to get mounting holes lined up. Once that was done, everything went pretty quickly finished and tested. Towed 600 miles and worked flawlessly. Much better than using the bumper tow points, as they were elevated causing a very bouncy towed on bridge aprons. Bumper tow points also let the towed have minor side to side movement, this does not, so a lot better towing experience.
by:
Tim
10/26/2026
2024
Chevrolet
Colorado
I had hoped to employ a mounting bracket assembly I had bought on-line used. It would have required extensive modification with an unsure outcome. I found this assembly at etrailer for a reasonable price and ordered it to remove uncertainty from the installation. Etrailer was helpful in completing the rest of my needs for a brake assembly also. Good people.
by:
Steve B.
09/03/2025
The Roadmaster Direct-Connect Base Plate Kit has performed flawlessly over the past year. With almost 10k miles logged during our 3 month trip across the US, the components have remained as installed and operated as expected.
by:
Conrad
10/14/2026
I really like the way it is hidden and doesn't stick out like a sore thumb. My Rubicon X has a metal skid under the bumper that I cut holes in for the base plate tabs to protrude. I made 5 or 6 trips to my shop to get it right. Would be nice if it came with a paper template showing where to trim. It bolted up perfectly and seems well made.
by:
Bob
04/17/2025
2018
Mazda
Miata
I installed this base plate on a 2018 Miata RF. I think I recall something about it taking 3.5 hours and my initial estimate was 3.5 days. It actually took a bit longer than that, but I was not pushing myself and did not have the luxury of having the vehicle on a lift but had it up on two ramps for the front wheels.
The order came pretty quickly, probably about 4 or 5 days between the time I placed it and UPS delivered it. The parts were well packaged and it came with a printed set of instructions. I had watched the video install on another Miata and if it weren't for that I'm not sure I would have tried it. I'm not a pro mechanic by any means but have worked on my own vehicles now for over 40 years. And I'm not a spring chicken either, so all the up and down working on the car can tire me fairly quickly. But if you are not in a rush and go carefully it can be done.
It took a day to do most of the disassembly. I removed both headlights and the intake tube on the passenger side. That tube came out much easier then it went back in.
The next day I got the baseplate mounted which helped to start visualizing how it all would work. All of the holes for the 6mm bolts did not quite line up with the holes in the frame. I had to file one sides worth for a bit of extra clearance. From my experience on this install you really want to leave all the bolt on the loose side till you get everything situated.
A couple of days off for rain and the then I got to work on the bracing. Initially I though I didnt need to cut the top lip of the frame but I decided to go ahead and do it anyway since that part didnt seem to sit flat when bolted from the back end. I'm still not sure its really necessary as the hump clears the metal lip without cutting it.
I also ordered a 14" long 1/2" drill bit to cut the holes in the frame. It was a Bosch bit, wasnt very expensive and it went through the metal like the proverbial hot knife. I managed to get all the big bolts installed in a day with a great sense of satisfaction.
The next day I torqued down all the bolts and the mount felt very solid. They stress that you need to install all the bolts, but honestly I can't see the 6mm bolts doing much compared to the half inch bolts that do most or all of the work. But I put them in and tightened them all the same.
A couple of days spent to install the tail light wiring and then I got back on to putting the front clip back on. My car must have had an aftermarket grill since it did not match the pictures or the video. I tried to position it carefully to see where the parts that were going to stick out would be so I didnt cut out more than I needed to. So there was a good amount of back and forth, cut and fit. In the end I had to make some extra cuts for clearance for the safety cable tabs as well as the mount for the 6 wire connector. Until I made the extra cuts the lower part of the front clip would not seat correctly. Getting the clip in the right position so it fits under the lights also takes some finagling.
Figuring out where all the bolts go back in can be interesting. Take pictures where you can. Dont be too aggressive when working with plastic parts. Overall I'm satisfied with the install, but I have yet to try and hook it up to tow.
The order came pretty quickly, probably about 4 or 5 days between the time I placed it and UPS delivered it. The parts were well packaged and it came with a printed set of instructions. I had watched the video install on another Miata and if it weren't for that I'm not sure I would have tried it. I'm not a pro mechanic by any means but have worked on my own vehicles now for over 40 years. And I'm not a spring chicken either, so all the up and down working on the car can tire me fairly quickly. But if you are not in a rush and go carefully it can be done.
It took a day to do most of the disassembly. I removed both headlights and the intake tube on the passenger side. That tube came out much easier then it went back in.
The next day I got the baseplate mounted which helped to start visualizing how it all would work. All of the holes for the 6mm bolts did not quite line up with the holes in the frame. I had to file one sides worth for a bit of extra clearance. From my experience on this install you really want to leave all the bolt on the loose side till you get everything situated.
A couple of days off for rain and the then I got to work on the bracing. Initially I though I didnt need to cut the top lip of the frame but I decided to go ahead and do it anyway since that part didnt seem to sit flat when bolted from the back end. I'm still not sure its really necessary as the hump clears the metal lip without cutting it.
I also ordered a 14" long 1/2" drill bit to cut the holes in the frame. It was a Bosch bit, wasnt very expensive and it went through the metal like the proverbial hot knife. I managed to get all the big bolts installed in a day with a great sense of satisfaction.
The next day I torqued down all the bolts and the mount felt very solid. They stress that you need to install all the bolts, but honestly I can't see the 6mm bolts doing much compared to the half inch bolts that do most or all of the work. But I put them in and tightened them all the same.
A couple of days spent to install the tail light wiring and then I got back on to putting the front clip back on. My car must have had an aftermarket grill since it did not match the pictures or the video. I tried to position it carefully to see where the parts that were going to stick out would be so I didnt cut out more than I needed to. So there was a good amount of back and forth, cut and fit. In the end I had to make some extra cuts for clearance for the safety cable tabs as well as the mount for the 6 wire connector. Until I made the extra cuts the lower part of the front clip would not seat correctly. Getting the clip in the right position so it fits under the lights also takes some finagling.
Figuring out where all the bolts go back in can be interesting. Take pictures where you can. Dont be too aggressive when working with plastic parts. Overall I'm satisfied with the install, but I have yet to try and hook it up to tow.
Gwendolyn Y.
4/18/2025
Wow, Bob! Thank you for such the detailed review and feedback about how your install went. I also appreciate all the photos you sent as well. I cant wait to hear about how your first tow goes and where you head off to.
by:
Roy
03/22/2026
It takes a while. Better if you have a car lift ( we have a lift )
by:
Joe
06/01/2025
2002 Honda CR-V. Easy to install. Two and a half hours, and stopped to eat a sandwich. To install the spacers inside the roll frame on the car I used an extension magnet to reach in there and position them. As you can see NO cutting was needed on the bumper cover!
Now I have to figure out the easiest way to run the wiring for the lights.
Thanks Lauren A for your help!
Now I have to figure out the easiest way to run the wiring for the lights.
Thanks Lauren A for your help!
Gwendolyn Y.
6/4/2025
Install for the base plate looks awesome, Joe! Unsure if you have a wiring kit yet but there are a few options so I'll go ahead share them with you here in case you don't yet. The most popular kit would be part # RM-15267. This can be difficult to install but it is the most reliable. I've also linked an install video for this kit. Something that still has an integrated look but easier to install I would go with part # RM-155. You do have to drill some holes into the back of the light housing, so if you're okay with doing that, this may be the better kit. Also included an install video for that kit as well. Hopefully the videos will help you get a good idea of how to run the wiring for your lights. Let me know if you have any questions after watching!
Helpful Links
tv-install-roadmaster-diode-kit-2007-honda-crv-rm-15267.aspx
tv-install-roadmaster-tail-light-wiring-kit-2010-honda-crv-rm-155.aspx
by:
John
09/03/2025
Very fast shipping, and the install was easy. Great product
John
9/4/2026
After a year of towing my truck up and down the east coast with my motorcoach, I am very happy with this product. it looks as good as the day it was installed and works perfect
Lazer S.
9/4/2026
@John Glad to hear it's been working well for you! What has been your favorite place you have gone so far?
by:
Matthew
04/24/2025
The folks at etrailer are fantastic. I didn't know everything I needed to tow my car behind our RV... but they did! Everything I needed was in the boxes and the videos made it all come together. Thank you to everyone at etrailer!
Brooke M.
4/27/2025
It ain't nothin' but a thang, Matthew! I hope you know we will always be here if you ever have any more projects we can help you with :)
Matthew
4/25/2026
Weve been using our Roadmaster set up for over two years and have traveled several thousand miles. All I do is make sure everything is cleaned and lubed. No problems so far.
by:
Richard
03/10/2024
Good product. If you are reasonably handy and have some tools, you can install this yourself in a few hours. I'm a mechanic, it took me a little over 2 hours to install on my own toad. The fit is good, there are 4 holes you have to drill, otherwise it is plug and play. When you insert and twist lock the tow bar mounts into their sockets they feel a little sloppy but they are secure, and i never noticed any rattle when towing. Overall i give it a 4 out of 5 for easy install and clean look after install. Pic included of installed base plate.
Richard
3/11/2025
I’ve towed the car many times even behind a semi truck a couple times and the base plate and the towbar works flawlessly. I have not had one problem super easy on super easy off very satisfied.
Bryce D.
3/11/2025
@Richard That's really great to hear! Did you take any memorable trips?
by:
Clark
07/25/2026
2026
chevrolet
Colorado
This was a bit of a challenge to install on a 2026 Chevrolet Colorado Z71. One item to be aware of, as you take off the front Facia of the truck for the install, there are two Facia "brakets" that attach to the front fenders that seem like they are use once plastic snaps. Three of the 4 snaps broke off on both sides when I removed the facia. These are about $35 a piece from Chevy and prevent you from making this a 1 day job. Additionally, there are 2 7mm screws/bolts that connect one of the coolers to the back of the bumper support and these are a real problem to get back in - over an hour of time and every 1/4" tool in my arsenal was needed to find a way to get these started. Finally, one of the Connecting Plates (Passenger side) needed to holes to be elongated to enable all the bolts to be started. Finally - you need to put the Brakaway bracket on the driver side, to have enough cable to reach you brake system. Probably have 4 hours in the disassembly and installation of the Direct-Connect Plate. Now waiting a couple days for the plastic brackets from Chevy to complete the install. Good Luck!!
25
3695
true
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Base Plate
- How to Flat-Tow a 2009 Ford F-350 with Four Wheels DownThe (GVWR) Gross Axle Weight Rating capacity you mentioned refers to the maximum amount of weight that can be placed on the axle and is not necessarily relevant for a flat-towing situation. Instead, you will want to look at the Gross Vehicle Weight Rating (GVWR). This is the maximum operating weight/mass of the vehicle which will be used to determine the correct towbar for your flat-towing setup. According to the owner's manual for your 2009 Ford F-350, if you have an electronically-shifted...
view full answer... - Availability of Base Plates for Towing a 2009 Ford F-250 Super Duty andThere are two base plate options for your 2009 Ford F-250 Super Duty. The one I recommend is the most common and will accommodate the most options and tow bars. This is the Roadmaster XL Base Plate Kit, item # 4412-1, which has removable draw bars and is designed specifically for your truck. There is also the Roadmaster MX Base Plate Kit, item # 4412-3, which is also designed for your truck and has removable draw bars. The difference with this kit is that the draw bars will not accept...
view full answer... - Recommendation for Tow Bar to Tow 2010 Ford F-250 Quad Cab Diesel Behind Farm MachineryMy recommendation for towing your 2010 Ford F-250 Quad Cab Diesel would be the Roadmaster Blackhawk 2 All-Terrain Heavy Duty Tow Bar, part # RM-422, and the Roadmaster MX Base Plate Kit, part # 4412-3. This tow bar and base plate kit are especially designed to tow vehicles with heavy duty frames and the tow bar installs easily into a 2 inch receiver hitch. You will need to have a 2 inch hitch receiver on your farm machinery to use this tow bar. I am including a link to the instructions...
view full answer... - Is There A Compatible Blue Ox Plug-In Tow Bar Wiring Kit For A 2008 Ford F-250Blue Ox currently only has a Bulb & Socket Kit # BX8869 that's compatible with a 2008 Ford F-250 and no plug-in style kits. The best option we currently offer is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, which is a splice in kit. if you haven't already picked out the rest of your components then I have the following recommendations: Tow Bar: etrailer XHD Non-Binding Tow Bar # e84ZR. This tow bar has safety cables bracketed to the arms so you won't have to...
view full answer...
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
2/12/2025
Install looks great, Jeff! Do you have any plans of where you are going to go this season yet?